diff mbox series

[v5,3/8] clk: lochnagar: Add initial binding documentation

Message ID 20181120141631.18949-3-ckeepax@opensource.cirrus.com (mailing list archive)
State Changes Requested, archived
Headers show
Series [v5,1/8] regulator: lochnagar: Move driver to binding from DT | expand

Commit Message

Charles Keepax Nov. 20, 2018, 2:16 p.m. UTC 
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 .../devicetree/bindings/clock/cirrus,lochnagar.txt | 89 ++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

Comments

Rob Herring Nov. 26, 2018, 8:16 p.m. UTC | #1 
On Tue, Nov 20, 2018 at 02:16:26PM +0000, Charles Keepax wrote:
> Lochnagar is an evaluation and development board for Cirrus
> Logic Smart CODEC and Amp devices. It allows the connection of
> most Cirrus Logic devices on mini-cards, as well as allowing
> connection of various application processor systems to provide a
> full evaluation platform. This driver supports the board
> controller chip on the Lochnagar board.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>  .../devicetree/bindings/clock/cirrus,lochnagar.txt | 89 ++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> new file mode 100644
> index 000000000000..c1b5478d5432
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> @@ -0,0 +1,89 @@
> +Cirrus Logic Lochnagar Audio Development Board
> +
> +Lochnagar is an evaluation and development board for Cirrus Logic
> +Smart CODEC and Amp devices. It allows the connection of most Cirrus
> +Logic devices on mini-cards, as well as allowing connection of
> +various application processor systems to provide a full evaluation
> +platform.  Audio system topology, clocking and power can all be
> +controlled through the Lochnagar, allowing the device under test
> +to be used in a variety of possible use cases.
> +
> +This binding document describes the binding for the clock portion of
> +the driver.
> +
> +Also see these documents for generic binding information:
> +  [1] Clock : ../clock/clock-bindings.txt
> +
> +And these for relevant defines:
> +  [2] include/dt-bindings/clock/lochnagar.h
> +
> +This binding must be part of the Lochnagar MFD binding:
> +  [3] ../mfd/cirrus,lochnagar.txt
> +
> +Required properties:
> +
> +  - compatible : One of the following strings:
> +                 "cirrus,lochnagar1-clk"
> +                 "cirrus,lochnagar2-clk"

What's the 1 vs. 2?

> +
> +  - #clock-cells : Must be 1. The first cell indicates the clock
> +    number, see [2] for available clocks and [1].
> +
> +Optional properties:
> +
> +  - clocks : Must contain an entry for each clock in clock-names.
> +  - clock-names : May contain entries for each of the following
> +    clocks:
> +     - ln-cdc-clkout : Output clock from CODEC card.
> +     - ln-dsp-clkout : Output clock from DSP card.
> +     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
> +       input audio clocks from host system.
> +     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
> +       external connector.
> +     - ln-spdif-clkout : Optional input audio clock from SPDIF.
> +     - ln-adat-clkout : Optional input audio clock from ADAT.
> +     - ln-pmic-32k : On board fixed regulator.

regulator?

> +     - ln-clk-12m : On board fixed regulator.
> +     - ln-clk-11m : On board fixed regulator.
> +     - ln-clk-24m : On board fixed regulator.
> +     - ln-clk-22m : On board fixed regulator.
> +     - ln-usb-clk-24m : On board fixed regulator.
> +     - ln-usb-clk-12m : On board fixed regulator.
> +
> +  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
> +    [2] for available clocks.
> +  - assigned-clock-parents : Parents to be assigned to the clocks
> +    listed in "assigned-clocks".
> +
> +Optional sub-nodes:
> +
> +  - fixed-clock nodes may be registered for the following on board clocks:
> +     - ln-pmic-32k : 32768 kHz
> +     - ln-clk-12m : 12288000 kHz
> +     - ln-clk-11m : 11298600 kHz
> +     - ln-clk-24m : 24576000 kHz
> +     - ln-clk-22m : 22579200 kHz
> +     - ln-usb-clk-24m : 24576000 kHz
> +     - ln-usb-clk-12m : 12288000 kHz
> +
> +Example:
> +
> +lochnagar-clk {
> +	compatible = "cirrus,lochnagar2-clk";
> +
> +	#clock-cells = <1>;
> +
> +	clocks = <&clk-audio>, <&clk_pmic>;
> +	clock-names = "ln-gf-mclk2", "ln-pmic-32k";
> +
> +	assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
> +			  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
> +	assigned-clock-parents = <&clk-audio>,
> +				 <&clk-pmic>;
> +
> +	clk-pmic: clk-pmic {

This isn't really any relationship to the parent and I think shouldn't 
be a sub-node.

> +		compatible = "fixed-clock";
> +		clock-cells = <0>;
> +		clock-frequency = <32768>;
> +	};
> +};
> -- 
> 2.11.0
>
Charles Keepax Nov. 27, 2018, 9:34 a.m. UTC | #2 
On Mon, Nov 26, 2018 at 02:16:45PM -0600, Rob Herring wrote:
> On Tue, Nov 20, 2018 at 02:16:26PM +0000, Charles Keepax wrote:
> > Lochnagar is an evaluation and development board for Cirrus
> > Logic Smart CODEC and Amp devices. It allows the connection of
> > most Cirrus Logic devices on mini-cards, as well as allowing
> > connection of various application processor systems to provide a
> > full evaluation platform. This driver supports the board
> > controller chip on the Lochnagar board.
> > 
> > Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> > ---
> > +  - compatible : One of the following strings:
> > +                 "cirrus,lochnagar1-clk"
> > +                 "cirrus,lochnagar2-clk"
> 
> What's the 1 vs. 2?
> 

There are two versions of the device, we need to be able to
differenciate between them in the driver.

> > +     - ln-pmic-32k : On board fixed regulator.
> 
> regulator?

Well that is a spectacular copy and paste oversight sorry about
that will get it fixed up.

> 
> > +     - ln-clk-12m : On board fixed regulator.
> > +     - ln-clk-11m : On board fixed regulator.
> > +     - ln-clk-24m : On board fixed regulator.
> > +     - ln-clk-22m : On board fixed regulator.
> > +     - ln-usb-clk-24m : On board fixed regulator.
> > +     - ln-usb-clk-12m : On board fixed regulator.

> > +lochnagar-clk {
> > +	compatible = "cirrus,lochnagar2-clk";
> > +
> > +	#clock-cells = <1>;
> > +
> > +	clocks = <&clk-audio>, <&clk_pmic>;
> > +	clock-names = "ln-gf-mclk2", "ln-pmic-32k";
> > +
> > +	assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
> > +			  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
> > +	assigned-clock-parents = <&clk-audio>,
> > +				 <&clk-pmic>;
> > +
> > +	clk-pmic: clk-pmic {
> 
> This isn't really any relationship to the parent and I think shouldn't 
> be a sub-node.
> 

Yeah sorry that is a good point will move it out.

Thanks,
Charles
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
new file mode 100644
index 000000000000..c1b5478d5432
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
@@ -0,0 +1,89 @@ 
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the clock portion of
+the driver.
+
+Also see these documents for generic binding information:
+  [1] Clock : ../clock/clock-bindings.txt
+
+And these for relevant defines:
+  [2] include/dt-bindings/clock/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [3] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar1-clk"
+                 "cirrus,lochnagar2-clk"
+
+  - #clock-cells : Must be 1. The first cell indicates the clock
+    number, see [2] for available clocks and [1].
+
+Optional properties:
+
+  - clocks : Must contain an entry for each clock in clock-names.
+  - clock-names : May contain entries for each of the following
+    clocks:
+     - ln-cdc-clkout : Output clock from CODEC card.
+     - ln-dsp-clkout : Output clock from DSP card.
+     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+       input audio clocks from host system.
+     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+       external connector.
+     - ln-spdif-clkout : Optional input audio clock from SPDIF.
+     - ln-adat-clkout : Optional input audio clock from ADAT.
+     - ln-pmic-32k : On board fixed regulator.
+     - ln-clk-12m : On board fixed regulator.
+     - ln-clk-11m : On board fixed regulator.
+     - ln-clk-24m : On board fixed regulator.
+     - ln-clk-22m : On board fixed regulator.
+     - ln-usb-clk-24m : On board fixed regulator.
+     - ln-usb-clk-12m : On board fixed regulator.
+
+  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+    [2] for available clocks.
+  - assigned-clock-parents : Parents to be assigned to the clocks
+    listed in "assigned-clocks".
+
+Optional sub-nodes:
+
+  - fixed-clock nodes may be registered for the following on board clocks:
+     - ln-pmic-32k : 32768 kHz
+     - ln-clk-12m : 12288000 kHz
+     - ln-clk-11m : 11298600 kHz
+     - ln-clk-24m : 24576000 kHz
+     - ln-clk-22m : 22579200 kHz
+     - ln-usb-clk-24m : 24576000 kHz
+     - ln-usb-clk-12m : 12288000 kHz
+
+Example:
+
+lochnagar-clk {
+	compatible = "cirrus,lochnagar2-clk";
+
+	#clock-cells = <1>;
+
+	clocks = <&clk-audio>, <&clk_pmic>;
+	clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+	assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
+			  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
+	assigned-clock-parents = <&clk-audio>,
+				 <&clk-pmic>;
+
+	clk-pmic: clk-pmic {
+		compatible = "fixed-clock";
+		clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};