diff mbox series

[v7,08/23] drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls

Message ID 20190201154232.10505-9-jagan@amarulasolutions.com (mailing list archive)
State Not Applicable, archived
Headers show
Series drm/sun4i: Allwinner A64 MIPI-DSI support | expand

Commit Message

Jagan Teki Feb. 1, 2019, 3:42 p.m. UTC 
The burst mode panels with 4-lane would require to enable trail bits
in DSI basic control register.

So, enable 2byte trail and trail_env for 4-lane burst mode devices.

Allwinner A64 BSP should also relie on same setup for enabling trail
bit in DSI controller.

Reference code avialable in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

if (panel->lcd_dsi_lane == 4)
{
   dsi_dev[sel]->dsi_basic_ctl.bits.trail_inv = 0xc;
   dsi_dev[sel]->dsi_basic_ctl.bits.trail_fill     = 1;
}

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 46ad142e66e8..a2ad9fa7f8d5 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -33,6 +33,8 @@ 
 #define SUN6I_DSI_CTL_EN			BIT(0)
 
 #define SUN6I_DSI_BASIC_CTL_REG		0x00c
+#define SUN6I_DSI_BASIC_CTL_TRAIL_INV(n)	(((n) & 0xf) << 4)
+#define SUN6I_DSI_BASIC_CTL_TRAIL_FILL		BIT(3)
 #define SUN6I_DSI_BASIC_CTL_HBP_DIS		BIT(2)
 #define SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS		BIT(1)
 #define SUN6I_DSI_BASIC_CTL_VIDEO_BURST		BIT(0)
@@ -464,6 +466,10 @@  static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 	/* enable burst mode */
 	regmap_read(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, &val);
 	val |= SUN6I_DSI_BASIC_CTL_VIDEO_BURST;
+	if (device->lanes == 4) {
+		val |= SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
+		val |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL;
+	}
 	regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, val);
 }