diff mbox series

[v3,12/16] ARM: mmp: add SMP support

Message ID 20190830220743.439670-13-lkundrak@v3.sk (mailing list archive)
State Not Applicable, archived
Headers show
Series Initial support for Marvell MMP3 SoC | expand

Commit Message

Lubomir Rintel Aug. 30, 2019, 10:07 p.m. UTC 
Used to bring up the second core on MMP3.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- Wrap secondary_startup with __pa_symbol(), instead of
  SW_BRANCH_VIRT_ADDR.

Changes since v1:
- Wrap SW_BRANCH_VIRT_ADDR with __pa_symbol()

 arch/arm/mach-mmp/Makefile  |  3 +++
 arch/arm/mach-mmp/platsmp.c | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)
 create mode 100644 arch/arm/mach-mmp/platsmp.c
diff mbox series

Patch

diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 322c1c97dc900..7b3a7f979eece 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -22,6 +22,9 @@  ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
 endif
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
+endif
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c
new file mode 100644
index 0000000000000..c99405469bb4b
--- /dev/null
+++ b/arch/arm/mach-mmp/platsmp.c
@@ -0,0 +1,32 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/smp.h>
+#include "addr-map.h"
+
+#define SW_BRANCH_VIRT_ADDR	CIU_REG(0x24)
+
+static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/*
+	 * Apparently, the boot ROM on the second core spins on this
+	 * register becoming non-zero and then jumps to the address written
+	 * there. No IPIs involved.
+	 */
+	__raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR);
+	return 0;
+}
+
+static void mmp3_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(SCU_VIRT_BASE);
+}
+
+static const struct smp_operations mmp3_smp_ops __initconst = {
+	.smp_prepare_cpus	= mmp3_smp_prepare_cpus,
+	.smp_boot_secondary	= mmp3_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops);