| Message ID | 20191107190615.5656-1-jeffrey.l.hugo@gmail.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | clk: qcom: smd: Add missing pnoc clock | expand |
Quoting Jeffrey Hugo (2019-11-07 11:06:15) > When MSM8998 support was added, and analysis was done to determine what > clocks would be consumed. That analysis had a flaw, which caused the > pnoc to be skipped. The pnoc clock needs to be on to access the uart > for the console. The clock is on from boot, but has no consumer votes > in the RPM. When we attempt to boot the modem, it causes the RPM to > turn off pnoc, which kills our access to the console and causes CPU hangs. > > We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in > an implicit vote for linux and prevent issues when booting modem. > Hopefully pnoc can be consumed by the interconnect framework in future > so that Linux can rely on explicit votes. > > Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > --- Applied to clk-next
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index fef5e8157061..930fa4a4c52a 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -648,6 +648,7 @@ static const struct rpm_smd_clk_desc rpm_clk_qcs404 = { }; /* msm8998 */ +DEFINE_CLK_SMD_RPM(msm8998, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); @@ -670,6 +671,8 @@ DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5); DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6); DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6); static struct clk_smd_rpm *msm8998_clks[] = { + [RPM_SMD_PCNOC_CLK] = &msm8998_pcnoc_clk, + [RPM_SMD_PCNOC_A_CLK] = &msm8998_pcnoc_a_clk, [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk, [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk, [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
When MSM8998 support was added, and analysis was done to determine what clocks would be consumed. That analysis had a flaw, which caused the pnoc to be skipped. The pnoc clock needs to be on to access the uart for the console. The clock is on from boot, but has no consumer votes in the RPM. When we attempt to boot the modem, it causes the RPM to turn off pnoc, which kills our access to the console and causes CPU hangs. We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in an implicit vote for linux and prevent issues when booting modem. Hopefully pnoc can be consumed by the interconnect framework in future so that Linux can rely on explicit votes. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> --- drivers/clk/qcom/clk-smd-rpm.c | 3 +++ 1 file changed, 3 insertions(+)