| Message ID | 20191220065314.237624-6-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/5] dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks | expand |
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index c1947b5a688d7..15449c72c042b 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -49,6 +49,28 @@ &usb_otg_phy0 { status = "okay"; }; +&hsic0 { + status = "okay"; + + usb1@1 { + compatible = "usb424,2640"; + reg = <0x01>; + #address-cells = <0x01>; + #size-cells = <0x00>; + + mass-storage@1 { + compatible = "usb424,4040"; + reg = <0x01>; + status = "disabled"; + }; + }; +}; + +&hsic_phy0 { + status = "okay"; + reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>; +}; + &mmc3 { status = "okay"; max-frequency = <50000000>;
There's a SMSC USB2640 (USB hub & SD controller) connected to it, but the SD card slot footprint is unpopulated. Also connected to the hub is a SMSC LAN7500 gigabit ethernet adapter. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- arch/arm/boot/dts/mmp3-dell-ariel.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)