@@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-omap/include
# Common support
-obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
+obj-y := id.o io.o control.o devices.o fb.o pm.o \
common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o
@@ -16,6 +16,8 @@ hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_HAS_REALTIME_COUNTER) += timer.o
+
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
@@ -111,7 +111,14 @@ static inline int omap_l2_cache_init(void)
#define OMAP_L2C_AUX_CTRL 0
#define omap4_l2c310_write_sec NULL
#endif
+
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
extern void omap5_realtime_timer_init(void);
+#else
+static inline void omap5_realtime_timer_init(void)
+{
+}
+#endif
void omap2420_init_early(void);
void omap2430_init_early(void);
@@ -26,34 +26,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dmtimer-omap.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include <plat/counter-32k.h>
-#include <clocksource/timer-ti-dm.h>
#include "soc.h"
#include "common.h"
#include "control.h"
-#include "powerdomain.h"
#include "omap-secure.h"
#define REALTIME_COUNTER_BASE 0x48243200
@@ -61,294 +39,12 @@
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14
#define NUMERATOR_DENUMERATOR_MASK 0xfffff000
-/* Clockevent code */
-
-static struct omap_dm_timer clkev;
-static struct clock_event_device clockevent_gpt;
-
-/* Clockevent hwmod for am335x and am437x suspend */
-static struct omap_hwmod *clockevent_gpt_hwmod;
-
-/* Clockesource hwmod for am437x suspend */
-static struct omap_hwmod *clocksource_gpt_hwmod;
-
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
static unsigned long arch_timer_freq;
void set_cntfreq(void)
{
omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
}
-#endif
-
-static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_gpt;
-
- __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static int omap2_gp_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
- 0xffffffff - cycles, OMAP_TIMER_POSTED);
-
- return 0;
-}
-
-static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
-{
- __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
- return 0;
-}
-
-static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
-{
- u32 period;
-
- __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
-
- period = clkev.rate / HZ;
- period -= 1;
- /* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
- OMAP_TIMER_POSTED);
- __omap_dm_timer_load_start(&clkev,
- OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
- 0xffffffff - period, OMAP_TIMER_POSTED);
- return 0;
-}
-
-static void omap_clkevt_idle(struct clock_event_device *unused)
-{
- if (!clockevent_gpt_hwmod)
- return;
-
- omap_hwmod_idle(clockevent_gpt_hwmod);
-}
-
-static void omap_clkevt_unidle(struct clock_event_device *unused)
-{
- if (!clockevent_gpt_hwmod)
- return;
-
- omap_hwmod_enable(clockevent_gpt_hwmod);
- __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-}
-
-static struct clock_event_device clockevent_gpt = {
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = omap2_gp_timer_set_next_event,
- .set_state_shutdown = omap2_gp_timer_shutdown,
- .set_state_periodic = omap2_gp_timer_set_periodic,
- .set_state_oneshot = omap2_gp_timer_shutdown,
- .tick_resume = omap2_gp_timer_shutdown,
-};
-
-static const struct of_device_id omap_timer_match[] __initconst = {
- { .compatible = "ti,omap2420-timer", },
- { .compatible = "ti,omap3430-timer", },
- { .compatible = "ti,omap4430-timer", },
- { .compatible = "ti,omap5430-timer", },
- { .compatible = "ti,dm814-timer", },
- { .compatible = "ti,dm816-timer", },
- { .compatible = "ti,am335x-timer", },
- { .compatible = "ti,am335x-timer-1ms", },
- { }
-};
-
-static int omap_timer_add_disabled_property(struct device_node *np)
-{
- struct property *prop;
-
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- if (!prop)
- return -ENOMEM;
-
- prop->name = "status";
- prop->value = "disabled";
- prop->length = strlen(prop->value);
-
- return of_add_property(np, prop);
-}
-
-static int omap_timer_update_dt(struct device_node *np)
-{
- int error = 0;
-
- if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
- error = omap_timer_add_disabled_property(np);
- if (error)
- return error;
- }
-
- /* No parent interconnect target module configured? */
- if (of_get_property(np, "ti,hwmods", NULL))
- return error;
-
- /* Tag parent interconnect target module disabled */
- error = omap_timer_add_disabled_property(np->parent);
- if (error)
- return error;
-
- return 0;
-}
-
-/**
- * omap_get_timer_dt - get a timer using device-tree
- * @match - device-tree match structure for matching a device type
- * @property - optional timer property to match
- *
- * Helper function to get a timer during early boot using device-tree for use
- * as kernel system timer. Optionally, the property argument can be used to
- * select a timer with a specific property. Once a timer is found then mark
- * the timer node in device-tree as disabled, to prevent the kernel from
- * registering this timer as a platform device and so no one else can use it.
- */
-static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match,
- const char *property)
-{
- struct device_node *np;
- int error;
-
- for_each_matching_node(np, match) {
- if (!of_device_is_available(np))
- continue;
-
- if (property && !of_get_property(np, property, NULL))
- continue;
-
- if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
- of_get_property(np, "ti,timer-dsp", NULL) ||
- of_get_property(np, "ti,timer-pwm", NULL) ||
- of_get_property(np, "ti,timer-secure", NULL)))
- continue;
-
- error = omap_timer_update_dt(np);
- WARN(error, "%s: Could not update dt: %i\n", __func__, error);
-
- return np;
- }
-
- return NULL;
-}
-
-/**
- * omap_dmtimer_init - initialisation function when device tree is used
- *
- * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
- * cannot be used by the kernel as they are reserved. Therefore, to prevent the
- * kernel registering these devices remove them dynamically from the device
- * tree on boot.
- */
-static void __init omap_dmtimer_init(void)
-{
- struct device_node *np;
-
- if (!cpu_is_omap34xx() && !soc_is_dra7xx())
- return;
-
- /* If we are a secure device, remove any secure timer nodes */
- if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
- of_node_put(np);
- }
-}
-
-/**
- * omap_dm_timer_get_errata - get errata flags for a timer
- *
- * Get the timer errata flags that are specific to the OMAP device being used.
- */
-static u32 __init omap_dm_timer_get_errata(void)
-{
- if (cpu_is_omap24xx())
- return 0;
-
- return OMAP_TIMER_ERRATA_I103_I767;
-}
-
-static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
- const char *fck_source,
- const char *property,
- const char **timer_name,
- int posted)
-{
- const char *oh_name = NULL;
- struct device_node *np;
- struct omap_hwmod *oh;
- struct clk *src;
- int r = 0;
-
- np = omap_get_timer_dt(omap_timer_match, property);
- if (!np)
- return -ENODEV;
-
- of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
- if (!oh_name) {
- of_property_read_string_index(np->parent, "ti,hwmods", 0,
- &oh_name);
- if (!oh_name)
- return -ENODEV;
- }
-
- timer->irq = irq_of_parse_and_map(np, 0);
- if (!timer->irq)
- return -ENXIO;
-
- timer->io_base = of_iomap(np, 0);
-
- timer->fclk = of_clk_get_by_name(np, "fck");
-
- of_node_put(np);
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh)
- return -ENODEV;
-
- *timer_name = oh->name;
-
- if (!timer->io_base)
- return -ENXIO;
-
- omap_hwmod_setup_one(oh_name);
-
- /* After the dmtimer is using hwmod these clocks won't be needed */
- if (IS_ERR_OR_NULL(timer->fclk))
- timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
- if (IS_ERR(timer->fclk))
- return PTR_ERR(timer->fclk);
-
- src = clk_get(NULL, fck_source);
- if (IS_ERR(src))
- return PTR_ERR(src);
-
- WARN(clk_set_parent(timer->fclk, src) < 0,
- "Cannot set timer parent clock, no PLL clock driver?");
-
- clk_put(src);
-
- omap_hwmod_enable(oh);
- __omap_dm_timer_init_regs(timer);
-
- if (posted)
- __omap_dm_timer_enable_posted(timer);
-
- /* Check that the intended posted configuration matches the actual */
- if (posted != timer->posted)
- return -EINVAL;
-
- timer->rate = clk_get_rate(timer->fclk);
- timer->reserved = 1;
-
- return r;
-}
#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
void tick_broadcast(const struct cpumask *mask)
@@ -356,226 +52,6 @@ void tick_broadcast(const struct cpumask *mask)
}
#endif
-static void __init omap2_gp_clockevent_init(int gptimer_id,
- const char *fck_source,
- const char *property)
-{
- int res;
-
- clkev.id = gptimer_id;
- clkev.errata = omap_dm_timer_get_errata();
-
- /*
- * For clock-event timers we never read the timer counter and
- * so we are not impacted by errata i103 and i767. Therefore,
- * we can safely ignore this errata for clock-event timers.
- */
- __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
-
- res = omap_dm_timer_init_one(&clkev, fck_source, property,
- &clockevent_gpt.name, OMAP_TIMER_POSTED);
- BUG_ON(res);
-
- if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
- IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
- pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
-
- __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
- clockevent_gpt.cpumask = cpu_possible_mask;
- clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
- clockevents_config_and_register(&clockevent_gpt, clkev.rate,
- 3, /* Timer internal resynch latency */
- 0xffffffff);
-
- if (soc_is_am33xx() || soc_is_am43xx()) {
- clockevent_gpt.suspend = omap_clkevt_idle;
- clockevent_gpt.resume = omap_clkevt_unidle;
-
- clockevent_gpt_hwmod =
- omap_hwmod_lookup(clockevent_gpt.name);
- }
-
- pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
- clkev.rate);
-}
-
-/* Clocksource code */
-static struct omap_dm_timer clksrc;
-static bool use_gptimer_clksrc __initdata;
-
-/*
- * clocksource
- */
-static u64 clocksource_read_cycles(struct clocksource *cs)
-{
- return (u64)__omap_dm_timer_read_counter(&clksrc,
- OMAP_TIMER_NONPOSTED);
-}
-
-static struct clocksource clocksource_gpt = {
- .rating = 300,
- .read = clocksource_read_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u64 notrace dmtimer_read_sched_clock(void)
-{
- if (clksrc.reserved)
- return __omap_dm_timer_read_counter(&clksrc,
- OMAP_TIMER_NONPOSTED);
-
- return 0;
-}
-
-static const struct of_device_id omap_counter_match[] __initconst = {
- { .compatible = "ti,omap-counter32k", },
- { }
-};
-
-/* Setup free-running counter for clocksource */
-static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
-{
- int ret;
- struct device_node *np = NULL;
- struct omap_hwmod *oh;
- const char *oh_name = "counter_32k";
-
- /*
- * See if the 32kHz counter is supported.
- */
- np = omap_get_timer_dt(omap_counter_match, NULL);
- if (!np)
- return -ENODEV;
-
- of_property_read_string_index(np->parent, "ti,hwmods", 0, &oh_name);
- if (!oh_name) {
- of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
- if (!oh_name)
- return -ENODEV;
- }
-
- /*
- * First check hwmod data is available for sync32k counter
- */
- oh = omap_hwmod_lookup(oh_name);
- if (!oh || oh->slaves_cnt == 0)
- return -ENODEV;
-
- omap_hwmod_setup_one(oh_name);
-
- ret = omap_hwmod_enable(oh);
- if (ret) {
- pr_warn("%s: failed to enable counter_32k module (%d)\n",
- __func__, ret);
- return ret;
- }
-
- return ret;
-}
-
-static unsigned int omap2_gptimer_clksrc_load;
-
-static void omap2_gptimer_clksrc_suspend(struct clocksource *unused)
-{
- omap2_gptimer_clksrc_load =
- __omap_dm_timer_read_counter(&clksrc, OMAP_TIMER_NONPOSTED);
-
- omap_hwmod_idle(clocksource_gpt_hwmod);
-}
-
-static void omap2_gptimer_clksrc_resume(struct clocksource *unused)
-{
- omap_hwmod_enable(clocksource_gpt_hwmod);
-
- __omap_dm_timer_load_start(&clksrc,
- OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
- omap2_gptimer_clksrc_load,
- OMAP_TIMER_NONPOSTED);
-}
-
-static void __init omap2_gptimer_clocksource_init(int gptimer_id,
- const char *fck_source,
- const char *property)
-{
- int res;
-
- clksrc.id = gptimer_id;
- clksrc.errata = omap_dm_timer_get_errata();
-
- res = omap_dm_timer_init_one(&clksrc, fck_source, property,
- &clocksource_gpt.name,
- OMAP_TIMER_NONPOSTED);
-
- if (soc_is_am43xx()) {
- clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend;
- clocksource_gpt.resume = omap2_gptimer_clksrc_resume;
-
- clocksource_gpt_hwmod =
- omap_hwmod_lookup(clocksource_gpt.name);
- }
-
- BUG_ON(res);
-
- __omap_dm_timer_load_start(&clksrc,
- OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0,
- OMAP_TIMER_NONPOSTED);
- sched_clock_register(dmtimer_read_sched_clock, 32, clksrc.rate);
-
- if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
- pr_err("Could not register clocksource %s\n",
- clocksource_gpt.name);
- else
- pr_info("OMAP clocksource: %s at %lu Hz\n",
- clocksource_gpt.name, clksrc.rate);
-}
-
-static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
- const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
- const char *clksrc_prop, bool gptimer)
-{
- omap_clk_init();
- omap_dmtimer_init();
- omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
-
- /* Enable the use of clocksource="gp_timer" kernel parameter */
- if (clksrc_nr && (use_gptimer_clksrc || gptimer))
- omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
- clksrc_prop);
- else
- omap2_sync32k_clocksource_init();
-}
-
-void __init omap_init_time(void)
-{
- __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
- 2, "timer_sys_ck", NULL, false);
-
- timer_probe();
-}
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
-void __init omap3_secure_sync32k_timer_init(void)
-{
- __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
- 2, "timer_sys_ck", NULL, false);
-
- timer_probe();
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
- defined(CONFIG_SOC_AM43XX)
-void __init omap3_gptimer_timer_init(void)
-{
- __omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
- 1, "timer_sys_ck", "ti,timer-alwon", true);
- if (of_have_populated_dt())
- timer_probe();
-}
-#endif
-
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
/*
@@ -589,7 +65,6 @@ void __init omap3_gptimer_timer_init(void)
*/
static void __init realtime_counter_init(void)
{
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
@@ -688,7 +163,6 @@ static void __init realtime_counter_init(void)
set_cntfreq();
iounmap(base);
-#endif
}
void __init omap5_realtime_timer_init(void)
@@ -699,28 +173,3 @@ void __init omap5_realtime_timer_init(void)
timer_probe();
}
#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
-
-/**
- * omap2_override_clocksource - clocksource override with user configuration
- *
- * Allows user to override default clocksource, using kernel parameter
- * clocksource="gp_timer" (For all OMAP2PLUS architectures)
- *
- * Note that, here we are using same standard kernel parameter "clocksource=",
- * and not introducing any OMAP specific interface.
- */
-static int __init omap2_override_clocksource(char *str)
-{
- if (!str)
- return 0;
- /*
- * For OMAP architecture, we only have two options
- * - sync_32k (default)
- * - gp_timer (sys_clk based)
- */
- if (!strcmp(str, "gp_timer"))
- use_gptimer_clksrc = true;
-
- return 0;
-}
-early_param("clocksource", omap2_override_clocksource);
With dmtimer and 32k counter being initialized based on devicetree data, we can just drop the old timer code. This still leaves the omap5 and dra7 realtime_counter_init() that depend on the smc calls and control module platform code for the dra7 quirk init. Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/Makefile | 4 +- arch/arm/mach-omap2/common.h | 7 + arch/arm/mach-omap2/timer.c | 551 ----------------------------------- 3 files changed, 10 insertions(+), 552 deletions(-)