diff mbox series

[09/12] soc: xilinx: vcu: make pll post divider explicit

Message ID 20201116075532.4019252-10-m.tretter@pengutronix.de (mailing list archive)
State Not Applicable, archived
Headers show
Series [01/12] ARM: dts: define indexes for output clocks | expand

Commit Message

Michael Tretter Nov. 16, 2020, 7:55 a.m. UTC 
According to the downstream driver documentation due to timing
constraints the output divider of the PLL has to be set to 1/2. Add a
helper function for that check instead of burying the code in one large
setup function.

The bit is undocumented and marked as reserved in the register
reference.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
 drivers/soc/xilinx/xlnx_vcu.c | 51 ++++++++++++++++++++++++-----------
 1 file changed, 35 insertions(+), 16 deletions(-)

Comments

Michal Simek Dec. 2, 2020, 2:51 p.m. UTC | #1 
On 16. 11. 20 8:55, Michael Tretter wrote:
> According to the downstream driver documentation due to timing
> constraints the output divider of the PLL has to be set to 1/2. Add a
> helper function for that check instead of burying the code in one large
> setup function.
> 
> The bit is undocumented and marked as reserved in the register
> reference.
> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
>  drivers/soc/xilinx/xlnx_vcu.c | 51 ++++++++++++++++++++++++-----------
>  1 file changed, 35 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
> index cedc8b7859f7..cf8456b4ef78 100644
> --- a/drivers/soc/xilinx/xlnx_vcu.c
> +++ b/drivers/soc/xilinx/xlnx_vcu.c
> @@ -79,6 +79,7 @@ struct xvcu_device {
>  	struct regmap *logicore_reg_ba;
>  	void __iomem *vcu_slcr_ba;
>  	struct clk_hw *pll;
> +	struct clk_hw *pll_post;

kernel doc again.

M
diff mbox series

Patch

diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
index cedc8b7859f7..cf8456b4ef78 100644
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ b/drivers/soc/xilinx/xlnx_vcu.c
@@ -79,6 +79,7 @@  struct xvcu_device {
 	struct regmap *logicore_reg_ba;
 	void __iomem *vcu_slcr_ba;
 	struct clk_hw *pll;
+	struct clk_hw *pll_post;
 	struct clk_hw_onecell_data *clk_data;
 };
 
@@ -272,6 +273,28 @@  static int xvcu_pll_wait_for_lock(struct xvcu_device *xvcu)
 	return -ETIMEDOUT;
 }
 
+static struct clk_hw *xvcu_register_pll_post(struct device *dev,
+					     const char *name,
+					     const char *parent_name,
+					     void __iomem *reg_base)
+{
+	u32 div;
+	u32 vcu_pll_ctrl;
+
+	/*
+	 * The output divider of the PLL must be set to 1/2 to meet the
+	 * timing in the design.
+	 */
+	vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL);
+	div = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT;
+	div = div & VCU_PLL_CTRL_CLKOUTDIV_MASK;
+	if (div != 1)
+		return ERR_PTR(-EINVAL);
+
+	return clk_hw_register_fixed_factor(dev, "vcu_pll_post", parent_name,
+					    CLK_SET_RATE_PARENT, 1, 2);
+}
+
 static const struct xvcu_pll_cfg *xvcu_find_cfg(int div)
 {
 	const struct xvcu_pll_cfg *cfg = NULL;
@@ -400,7 +423,7 @@  static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
 {
 	u32 refclk, coreclk, mcuclk, inte, deci;
 	u32 divisor_mcu, divisor_core, fvco;
-	u32 clkoutdiv, vcu_pll_ctrl, pll_clk;
+	u32 pll_clk;
 	u32 mod;
 	int i;
 	int ret;
@@ -423,19 +446,6 @@  static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
 	dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk);
 	dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk);
 
-	/*
-	 * The divide-by-2 should be always enabled (==1)
-	 * to meet the timing in the design.
-	 * Otherwise, it's an error
-	 */
-	vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL);
-	clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT;
-	clkoutdiv = clkoutdiv & VCU_PLL_CTRL_CLKOUTDIV_MASK;
-	if (clkoutdiv != 1) {
-		dev_err(xvcu->dev, "clkoutdiv value is invalid\n");
-		return -EINVAL;
-	}
-
 	for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) {
 		const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i];
 
@@ -482,7 +492,7 @@  static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
 
 	hw = clk_hw_register_fixed_rate(xvcu->dev, "vcu_pll",
 					__clk_get_name(xvcu->pll_ref),
-					0, pll_clk);
+					0, fvco);
 	if (IS_ERR(hw))
 		return PTR_ERR(hw);
 	xvcu->pll = hw;
@@ -609,6 +619,7 @@  static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
 	struct clk_hw *parent_default;
 	struct clk_hw_onecell_data *data;
 	struct clk_hw **hws;
+	struct clk_hw *hw;
 	void __iomem *reg_base = xvcu->vcu_slcr_ba;
 
 	data = devm_kzalloc(dev, struct_size(data, hws, CLK_XVCU_NUM_CLOCKS), GFP_KERNEL);
@@ -619,7 +630,13 @@  static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
 
 	xvcu->clk_data = data;
 
-	parent_default = xvcu->pll;
+	hw = xvcu_register_pll_post(dev, "vcu_pll_post",
+				    clk_hw_get_name(xvcu->pll), reg_base);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	xvcu->pll_post = hw;
+
+	parent_default = xvcu->pll_post;
 	parent_names[0] = "dummy";
 	parent_names[1] = clk_hw_get_name(parent_default);
 
@@ -650,6 +667,8 @@  static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu)
 		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]);
 	if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE]))
 		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]);
+
+	clk_hw_unregister_fixed_factor(xvcu->pll_post);
 }
 
 /**