diff mbox series

[2/4] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL

Message ID 20210105154645.217998-3-vkoul@kernel.org (mailing list archive)
State Superseded, archived
Headers show
Series Add clock drivers for SM8350 | expand

Commit Message

Vinod Koul Jan. 5, 2021, 3:46 p.m. UTC 
From: Vivek Aknurwar <viveka@codeaurora.org>

Lucid 5LPE is a slightly different Lucid PLL with different offsets and
porgramming sequence so add support for these

Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
[vkoul: rebase and tidy up for upstream]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 217 +++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |   4 +
 2 files changed, 221 insertions(+)

Comments

AngeloGioacchino Del Regno Jan. 13, 2021, 10:39 p.m. UTC | #1 
Il 05/01/21 16:46, Vinod Koul ha scritto:
> From: Vivek Aknurwar <viveka@codeaurora.org>
> 
> Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> porgramming sequence so add support for these
> 
> Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
> Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
> [vkoul: rebase and tidy up for upstream]
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>   drivers/clk/qcom/clk-alpha-pll.c | 217 +++++++++++++++++++++++++++++++
>   drivers/clk/qcom/clk-alpha-pll.h |   4 +
>   2 files changed, 221 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index f7721088494c..843c43649a5a 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>   /* LUCID PLL specific settings and offsets */
>   #define LUCID_PCAL_DONE		BIT(27)
>   
> +/* LUCID 5LPE PLL specific settings and offsets */
> +#define LUCID_5LPE_PCAL_DONE		BIT(11)
> +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
> +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
> +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
> +
>   #define pll_alpha_width(p)					\
>   		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
>   				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> @@ -1600,3 +1606,214 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
>   	.set_rate = clk_alpha_pll_agera_set_rate,
>   };
>   EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> +
> +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	/* If in FSM mode, just vote for it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		ret = clk_enable_regmap(hw);
> +		if (ret)
> +			return ret;
> +		return wait_for_pll_enable_lock(pll);
> +	}
> +
> +	/* Check if PLL is already enabled, return if enabled */
> +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> +	ret = wait_for_pll_enable_lock(pll);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the global PLL outputs */
> +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> +}
> +
> +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return;
> +
> +	/* If in FSM mode, just unvote it */
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> +		clk_disable_regmap(hw);
> +		return;
> +	}
> +
> +	/* Disable the global PLL output */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> +	if (ret)
> +		return;
> +
> +	/* Disable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> +	if (ret)
> +		return;
> +
> +	/* Place the PLL mode in STANDBY */
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +
> +/*
> + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> + * when the PLL comes out of reset. Calibrate in case it is not completed.
> + */
> +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	struct clk_hw *p;
> +	u32 val;
> +	int ret;
> +
> +	/* Return early if calibration is not needed. */
> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> +	if (val & LUCID_5LPE_PCAL_DONE)
> +		return 0;
> +
> +	p = clk_hw_get_parent(hw);
> +	if (!p)
> +		return -EINVAL;
> +
> +	ret = alpha_pll_lucid_5lpe_enable(hw);
> +	if (ret)
> +		return ret;
> +
> +	alpha_pll_lucid_5lpe_disable(hw);
> +
> +	return 0;
> +}
> +
> +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> +					 unsigned long prate)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	unsigned long rrate;
> +	u32 val, l;
> +	u64 a;
> +	int ret;
> +
> +	rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_16BIT_WIDTH);
> +
> +	/*
> +	 * Due to a limited number of bits for fractional rate programming, the
> +	 * rounded up rate could be marginally higher than the requested rate.
> +	 */
> +	ret = alpha_pll_check_rate_margin(hw, rrate, rate);
> +	if (ret)
> +		return ret;
> +
> +	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> +	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> +
> +	/* Latch the PLL input */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> +				 LUCID_5LPE_PLL_LATCH_INPUT, LUCID_5LPE_PLL_LATCH_INPUT);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait for 2 reference cycles before checking the ACK bit. */
> +	udelay(1);
> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> +	if (!(val & LUCID_5LPE_ALPHA_PLL_ACK_LATCH)) {
> +		pr_err("Lucid 5LPE PLL latch failed. Output may be unstable!\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Return the latch input to 0 */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), LUCID_5LPE_PLL_LATCH_INPUT, 0);
> +	if (ret)
> +		return ret;
> +
> +	if (clk_hw_is_enabled(hw)) {
> +		ret = wait_for_pll_enable_lock(pll);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Wait for PLL output to stabilize */
> +	udelay(100);
> +	return 0;
> +}
> +

This one looks exactly like alpha_pll_trion_set_rate() but:
1. You are forcing ALPHA_REG_16BIT_WIDTH for the alpha_pll_round_rate
    call: this is bad, you should actually use pll_alpha_width(pll) here,
    unless you have a very good reason that I didn't understand...
2. The only change between these two functions (trion and
    lucid_5lpe_set_rate) is that PLL_UPDATE becomes
    LUCID_5LPE_PLL_LATCH_INPUT, and that you check for
    LUCID_5LPE_ALPHA_PLL_ACK_LATCH instead of ALPHA_PLL_ACK_LATCH: this
    looks like being 95% code duplication.

The best options here, in my opinion, would be to commonize the function
alpha_pll_trion_set_rate: that will avoid this huge duplication.

> +static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> +					       unsigned long parent_rate)
> +{
> +	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> +	int i, val = 0, div, ret;
> +	u32 mask;
> +
> +	/*
> +	 * If the PLL is in FSM mode, then treat set_rate callback as a
> +	 * no-operation.
> +	 */
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
> +		return 0;
> +
> +	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> +	for (i = 0; i < pll->num_post_div; i++) {
> +		if (pll->post_div_table[i].div == div) {
> +			val = pll->post_div_table[i].val;
> +			break;
> +		}
> +	}
> +
> +	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
> +	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +				  mask, val << pll->post_div_shift);
> +}
> +
> +const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
> +	.prepare = alpha_pll_lucid_5lpe_prepare,
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +	.set_rate = alpha_pll_lucid_5lpe_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
> +	.enable = alpha_pll_lucid_5lpe_enable,
> +	.disable = alpha_pll_lucid_5lpe_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = clk_trion_pll_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
> +	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
> +	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
> +	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 0ea30d2f3da1..6943e933be0f 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
>   extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
>   extern const struct clk_ops clk_alpha_pll_agera_ops;
>   
> +extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
> +
>   void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>   			     const struct alpha_pll_config *config);
>   void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>
Vinod Koul Jan. 15, 2021, 1:02 p.m. UTC | #2 
On 13-01-21, 23:39, AngeloGioacchino Del Regno wrote:
> Il 05/01/21 16:46, Vinod Koul ha scritto:
> > From: Vivek Aknurwar <viveka@codeaurora.org>
> > 
> > Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> > porgramming sequence so add support for these
> > 
> > Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
> > Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
> > [vkoul: rebase and tidy up for upstream]
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >   drivers/clk/qcom/clk-alpha-pll.c | 217 +++++++++++++++++++++++++++++++
> >   drivers/clk/qcom/clk-alpha-pll.h |   4 +
> >   2 files changed, 221 insertions(+)
> > 
> > diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > index f7721088494c..843c43649a5a 100644
> > --- a/drivers/clk/qcom/clk-alpha-pll.c
> > +++ b/drivers/clk/qcom/clk-alpha-pll.c
> > @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> >   /* LUCID PLL specific settings and offsets */
> >   #define LUCID_PCAL_DONE		BIT(27)
> > +/* LUCID 5LPE PLL specific settings and offsets */
> > +#define LUCID_5LPE_PCAL_DONE		BIT(11)
> > +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
> > +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
> > +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
> > +
> >   #define pll_alpha_width(p)					\
> >   		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
> >   				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> > @@ -1600,3 +1606,214 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
> >   	.set_rate = clk_alpha_pll_agera_set_rate,
> >   };
> >   EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> > +
> > +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* If in FSM mode, just vote for it */
> > +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> > +		ret = clk_enable_regmap(hw);
> > +		if (ret)
> > +			return ret;
> > +		return wait_for_pll_enable_lock(pll);
> > +	}
> > +
> > +	/* Check if PLL is already enabled, return if enabled */
> > +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> > +	if (ret)
> > +		return ret;
> > +
> > +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> > +
> > +	ret = wait_for_pll_enable_lock(pll);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Enable the PLL outputs */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Enable the global PLL outputs */
> > +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> > +}
> > +
> > +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> > +	if (ret)
> > +		return;
> > +
> > +	/* If in FSM mode, just unvote it */
> > +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> > +		clk_disable_regmap(hw);
> > +		return;
> > +	}
> > +
> > +	/* Disable the global PLL output */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> > +	if (ret)
> > +		return;
> > +
> > +	/* Disable the PLL outputs */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> > +	if (ret)
> > +		return;
> > +
> > +	/* Place the PLL mode in STANDBY */
> > +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> > +}
> > +
> > +/*
> > + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> > + * when the PLL comes out of reset. Calibrate in case it is not completed.
> > + */
> > +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	struct clk_hw *p;
> > +	u32 val;
> > +	int ret;
> > +
> > +	/* Return early if calibration is not needed. */
> > +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> > +	if (val & LUCID_5LPE_PCAL_DONE)
> > +		return 0;
> > +
> > +	p = clk_hw_get_parent(hw);
> > +	if (!p)
> > +		return -EINVAL;
> > +
> > +	ret = alpha_pll_lucid_5lpe_enable(hw);
> > +	if (ret)
> > +		return ret;
> > +
> > +	alpha_pll_lucid_5lpe_disable(hw);
> > +
> > +	return 0;
> > +}
> > +
> > +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> > +					 unsigned long prate)
> > +{
> > +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > +	unsigned long rrate;
> > +	u32 val, l;
> > +	u64 a;
> > +	int ret;
> > +
> > +	rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_16BIT_WIDTH);
> > +
> > +	/*
> > +	 * Due to a limited number of bits for fractional rate programming, the
> > +	 * rounded up rate could be marginally higher than the requested rate.
> > +	 */
> > +	ret = alpha_pll_check_rate_margin(hw, rrate, rate);
> > +	if (ret)
> > +		return ret;
> > +
> > +	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> > +	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> > +
> > +	/* Latch the PLL input */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> > +				 LUCID_5LPE_PLL_LATCH_INPUT, LUCID_5LPE_PLL_LATCH_INPUT);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Wait for 2 reference cycles before checking the ACK bit. */
> > +	udelay(1);
> > +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> > +	if (!(val & LUCID_5LPE_ALPHA_PLL_ACK_LATCH)) {
> > +		pr_err("Lucid 5LPE PLL latch failed. Output may be unstable!\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* Return the latch input to 0 */
> > +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), LUCID_5LPE_PLL_LATCH_INPUT, 0);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (clk_hw_is_enabled(hw)) {
> > +		ret = wait_for_pll_enable_lock(pll);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	/* Wait for PLL output to stabilize */
> > +	udelay(100);
> > +	return 0;
> > +}
> > +
> 
> This one looks exactly like alpha_pll_trion_set_rate() but:
> 1. You are forcing ALPHA_REG_16BIT_WIDTH for the alpha_pll_round_rate
>    call: this is bad, you should actually use pll_alpha_width(pll) here,
>    unless you have a very good reason that I didn't understand...
> 2. The only change between these two functions (trion and
>    lucid_5lpe_set_rate) is that PLL_UPDATE becomes
>    LUCID_5LPE_PLL_LATCH_INPUT, and that you check for
>    LUCID_5LPE_ALPHA_PLL_ACK_LATCH instead of ALPHA_PLL_ACK_LATCH: this
>    looks like being 95% code duplication.
> 
> The best options here, in my opinion, would be to commonize the function
> alpha_pll_trion_set_rate: that will avoid this huge duplication.

Yeah I agree we could reuse, I can redo this. I was thinking of making
this bit as one of the values in register and use that but that does not
look good as this is not a register offset, so only option is to have a
new type of PLL for this and use that as here..
AngeloGioacchino Del Regno Jan. 15, 2021, 1:09 p.m. UTC | #3 
Il 15/01/21 14:02, Vinod Koul ha scritto:
> On 13-01-21, 23:39, AngeloGioacchino Del Regno wrote:
>> Il 05/01/21 16:46, Vinod Koul ha scritto:
>>> From: Vivek Aknurwar <viveka@codeaurora.org>
>>>
>>> Lucid 5LPE is a slightly different Lucid PLL with different offsets and
>>> porgramming sequence so add support for these
>>>
>>> Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
>>> Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
>>> [vkoul: rebase and tidy up for upstream]
>>> Signed-off-by: Vinod Koul <vkoul@kernel.org>
>>> ---
>>>    drivers/clk/qcom/clk-alpha-pll.c | 217 +++++++++++++++++++++++++++++++
>>>    drivers/clk/qcom/clk-alpha-pll.h |   4 +
>>>    2 files changed, 221 insertions(+)
>>>
>>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>>> index f7721088494c..843c43649a5a 100644
>>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>>> @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>>>    /* LUCID PLL specific settings and offsets */
>>>    #define LUCID_PCAL_DONE		BIT(27)
>>> +/* LUCID 5LPE PLL specific settings and offsets */
>>> +#define LUCID_5LPE_PCAL_DONE		BIT(11)
>>> +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
>>> +#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
>>> +#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
>>> +
>>>    #define pll_alpha_width(p)					\
>>>    		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
>>>    				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
>>> @@ -1600,3 +1606,214 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
>>>    	.set_rate = clk_alpha_pll_agera_set_rate,
>>>    };
>>>    EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
>>> +
>>> +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> +	u32 val;
>>> +	int ret;
>>> +
>>> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* If in FSM mode, just vote for it */
>>> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
>>> +		ret = clk_enable_regmap(hw);
>>> +		if (ret)
>>> +			return ret;
>>> +		return wait_for_pll_enable_lock(pll);
>>> +	}
>>> +
>>> +	/* Check if PLL is already enabled, return if enabled */
>>> +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
>>> +
>>> +	ret = wait_for_pll_enable_lock(pll);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Enable the PLL outputs */
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Enable the global PLL outputs */
>>> +	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
>>> +}
>>> +
>>> +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> +	u32 val;
>>> +	int ret;
>>> +
>>> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
>>> +	if (ret)
>>> +		return;
>>> +
>>> +	/* If in FSM mode, just unvote it */
>>> +	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
>>> +		clk_disable_regmap(hw);
>>> +		return;
>>> +	}
>>> +
>>> +	/* Disable the global PLL output */
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
>>> +	if (ret)
>>> +		return;
>>> +
>>> +	/* Disable the PLL outputs */
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
>>> +	if (ret)
>>> +		return;
>>> +
>>> +	/* Place the PLL mode in STANDBY */
>>> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
>>> +}
>>> +
>>> +/*
>>> + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
>>> + * when the PLL comes out of reset. Calibrate in case it is not completed.
>>> + */
>>> +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
>>> +{
>>> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> +	struct clk_hw *p;
>>> +	u32 val;
>>> +	int ret;
>>> +
>>> +	/* Return early if calibration is not needed. */
>>> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
>>> +	if (val & LUCID_5LPE_PCAL_DONE)
>>> +		return 0;
>>> +
>>> +	p = clk_hw_get_parent(hw);
>>> +	if (!p)
>>> +		return -EINVAL;
>>> +
>>> +	ret = alpha_pll_lucid_5lpe_enable(hw);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	alpha_pll_lucid_5lpe_disable(hw);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
>>> +					 unsigned long prate)
>>> +{
>>> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> +	unsigned long rrate;
>>> +	u32 val, l;
>>> +	u64 a;
>>> +	int ret;
>>> +
>>> +	rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_16BIT_WIDTH);
>>> +
>>> +	/*
>>> +	 * Due to a limited number of bits for fractional rate programming, the
>>> +	 * rounded up rate could be marginally higher than the requested rate.
>>> +	 */
>>> +	ret = alpha_pll_check_rate_margin(hw, rrate, rate);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
>>> +	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
>>> +
>>> +	/* Latch the PLL input */
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
>>> +				 LUCID_5LPE_PLL_LATCH_INPUT, LUCID_5LPE_PLL_LATCH_INPUT);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Wait for 2 reference cycles before checking the ACK bit. */
>>> +	udelay(1);
>>> +	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
>>> +	if (!(val & LUCID_5LPE_ALPHA_PLL_ACK_LATCH)) {
>>> +		pr_err("Lucid 5LPE PLL latch failed. Output may be unstable!\n");
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	/* Return the latch input to 0 */
>>> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), LUCID_5LPE_PLL_LATCH_INPUT, 0);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	if (clk_hw_is_enabled(hw)) {
>>> +		ret = wait_for_pll_enable_lock(pll);
>>> +		if (ret)
>>> +			return ret;
>>> +	}
>>> +
>>> +	/* Wait for PLL output to stabilize */
>>> +	udelay(100);
>>> +	return 0;
>>> +}
>>> +
>>
>> This one looks exactly like alpha_pll_trion_set_rate() but:
>> 1. You are forcing ALPHA_REG_16BIT_WIDTH for the alpha_pll_round_rate
>>     call: this is bad, you should actually use pll_alpha_width(pll) here,
>>     unless you have a very good reason that I didn't understand...
>> 2. The only change between these two functions (trion and
>>     lucid_5lpe_set_rate) is that PLL_UPDATE becomes
>>     LUCID_5LPE_PLL_LATCH_INPUT, and that you check for
>>     LUCID_5LPE_ALPHA_PLL_ACK_LATCH instead of ALPHA_PLL_ACK_LATCH: this
>>     looks like being 95% code duplication.
>>
>> The best options here, in my opinion, would be to commonize the function
>> alpha_pll_trion_set_rate: that will avoid this huge duplication.
> 
> Yeah I agree we could reuse, I can redo this. I was thinking of making
> this bit as one of the values in register and use that but that does not
> look good as this is not a register offset, so only option is to have a
> new type of PLL for this and use that as here..
> 

Just an idea:

static int __alpha_pll_trion_set_rate(struct clk_hw *hw,
                                       u32 upd_regbit, u32 latch_regbit,
                                       unsigned long rate,
                                       unsigned long prate)

static int alpha_pll_trion_set_rate( args here )
{
	return __alpha_pll_trion_set_rate(hw, PLL_UPDATE,
					 ALPHA_PLL_ACK_LATCH,
					 rate, prate);
}

static int alpha_pll_lucid_5lpe_set_rate( args )
{
	return __alpha_pll_trion_set_rate(hw, LUCID_5LPE_PLL_UPDATE,
					  LUCID_5LPE_PLL_ACK_LATCH,
					  rate, prate);
}

Perhaps, that would be good.

--Angelo
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index f7721088494c..843c43649a5a 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -156,6 +156,12 @@  EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 /* LUCID PLL specific settings and offsets */
 #define LUCID_PCAL_DONE		BIT(27)
 
+/* LUCID 5LPE PLL specific settings and offsets */
+#define LUCID_5LPE_PCAL_DONE		BIT(11)
+#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
+#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
+#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1600,3 +1606,214 @@  const struct clk_ops clk_alpha_pll_agera_ops = {
 	.set_rate = clk_alpha_pll_agera_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
+
+static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll_enable_lock(pll);
+	}
+
+	/* Check if PLL is already enabled, return if enabled */
+	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
+
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	/* Enable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
+	if (ret)
+		return ret;
+
+	/* Enable the global PLL outputs */
+	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	/* Disable the global PLL output */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return;
+
+	/* Disable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
+	if (ret)
+		return;
+
+	/* Place the PLL mode in STANDBY */
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
+}
+
+/*
+ * The Lucid 5LPE PLL requires a power-on self-calibration which happens
+ * when the PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct clk_hw *p;
+	u32 val;
+	int ret;
+
+	/* Return early if calibration is not needed. */
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (val & LUCID_5LPE_PCAL_DONE)
+		return 0;
+
+	p = clk_hw_get_parent(hw);
+	if (!p)
+		return -EINVAL;
+
+	ret = alpha_pll_lucid_5lpe_enable(hw);
+	if (ret)
+		return ret;
+
+	alpha_pll_lucid_5lpe_disable(hw);
+
+	return 0;
+}
+
+static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	unsigned long rrate;
+	u32 val, l;
+	u64 a;
+	int ret;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_16BIT_WIDTH);
+
+	/*
+	 * Due to a limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	ret = alpha_pll_check_rate_margin(hw, rrate, rate);
+	if (ret)
+		return ret;
+
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+	/* Latch the PLL input */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
+				 LUCID_5LPE_PLL_LATCH_INPUT, LUCID_5LPE_PLL_LATCH_INPUT);
+	if (ret)
+		return ret;
+
+	/* Wait for 2 reference cycles before checking the ACK bit. */
+	udelay(1);
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (!(val & LUCID_5LPE_ALPHA_PLL_ACK_LATCH)) {
+		pr_err("Lucid 5LPE PLL latch failed. Output may be unstable!\n");
+		return -EINVAL;
+	}
+
+	/* Return the latch input to 0 */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), LUCID_5LPE_PLL_LATCH_INPUT, 0);
+	if (ret)
+		return ret;
+
+	if (clk_hw_is_enabled(hw)) {
+		ret = wait_for_pll_enable_lock(pll);
+		if (ret)
+			return ret;
+	}
+
+	/* Wait for PLL output to stabilize */
+	udelay(100);
+	return 0;
+}
+
+static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+					       unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	int i, val = 0, div, ret;
+	u32 mask;
+
+	/*
+	 * If the PLL is in FSM mode, then treat set_rate callback as a
+	 * no-operation.
+	 */
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
+		return 0;
+
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+	for (i = 0; i < pll->num_post_div; i++) {
+		if (pll->post_div_table[i].div == div) {
+			val = pll->post_div_table[i].val;
+			break;
+		}
+	}
+
+	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
+	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+				  mask, val << pll->post_div_shift);
+}
+
+const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
+	.prepare = alpha_pll_lucid_5lpe_prepare,
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_lucid_5lpe_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0ea30d2f3da1..6943e933be0f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -144,6 +144,10 @@  extern const struct clk_ops clk_alpha_pll_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_agera_ops;
 
+extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,