| Message ID | 20210125174135.1223680-3-l.stach@pengutronix.de (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | [1/3] clk: imx8mq: add PLL monitor output | expand |
On 21-01-25 18:41:35, Lucas Stach wrote: > clkout1 and clkout2 allow to supply clocks from the SoC to the board, > which is used by some board designs to provide reference clocks. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Looks good to me. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> > --- > This hasn't been tested on HW, but is just based on the reference manual. > --- > drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++++ > include/dt-bindings/clock/imx8mn-clock.h | 9 ++++++++- > 2 files changed, 20 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c > index 3c21db942d5b..324c5fd0aa04 100644 > --- a/drivers/clk/imx/clk-imx8mn.c > +++ b/drivers/clk/imx/clk-imx8mn.c > @@ -281,6 +281,11 @@ static const char * const imx8mn_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sy > "sys_pll2_166m", "sys_pll3_out", "audio_pll1_out", > "video_pll1_out", "osc_32k", }; > > +static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "video_pll1_out", > + "dummy", "dummy", "gpu_pll_out", "dummy", > + "arm_pll_out", "sys_pll1", "sys_pll2", "sys_pll3", > + "dummy", "dummy", "osc_24m", "dummy", "osc_32k"}; > + > static struct clk_hw_onecell_data *clk_hw_data; > static struct clk_hw **hws; > > @@ -405,6 +410,13 @@ static int imx8mn_clocks_probe(struct platform_device *pdev) > hws[IMX8MN_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2); > hws[IMX8MN_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1); > > + hws[IMX8MN_CLK_CLKOUT1_SEL] = imx_clk_hw_mux("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels)); > + hws[IMX8MN_CLK_CLKOUT1_DIV] = imx_clk_hw_divider("clkout1_div", "clkout1_sel", base + 0x128, 0, 4); > + hws[IMX8MN_CLK_CLKOUT1] = imx_clk_hw_gate("clkout1", "clkout1_div", base + 0x128, 8); > + hws[IMX8MN_CLK_CLKOUT2_SEL] = imx_clk_hw_mux("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels)); > + hws[IMX8MN_CLK_CLKOUT2_DIV] = imx_clk_hw_divider("clkout2_div", "clkout2_sel", base + 0x128, 16, 4); > + hws[IMX8MN_CLK_CLKOUT2] = imx_clk_hw_gate("clkout2", "clkout2_div", base + 0x128, 24); > + > np = dev->of_node; > base = devm_platform_ioremap_resource(pdev, 0); > if (WARN_ON(IS_ERR(base))) { > diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h > index 621ea0e87c67..d24b627cb2e7 100644 > --- a/include/dt-bindings/clock/imx8mn-clock.h > +++ b/include/dt-bindings/clock/imx8mn-clock.h > @@ -234,6 +234,13 @@ > > #define IMX8MN_CLK_A53_CORE 214 > > -#define IMX8MN_CLK_END 215 > +#define IMX8MN_CLK_CLKOUT1_SEL 215 > +#define IMX8MN_CLK_CLKOUT1_DIV 216 > +#define IMX8MN_CLK_CLKOUT1 217 > +#define IMX8MN_CLK_CLKOUT2_SEL 218 > +#define IMX8MN_CLK_CLKOUT2_DIV 219 > +#define IMX8MN_CLK_CLKOUT2 220 > + > +#define IMX8MN_CLK_END 221 > > #endif > -- > 2.20.1 >
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 3c21db942d5b..324c5fd0aa04 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -281,6 +281,11 @@ static const char * const imx8mn_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sy "sys_pll2_166m", "sys_pll3_out", "audio_pll1_out", "video_pll1_out", "osc_32k", }; +static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "video_pll1_out", + "dummy", "dummy", "gpu_pll_out", "dummy", + "arm_pll_out", "sys_pll1", "sys_pll2", "sys_pll3", + "dummy", "dummy", "osc_24m", "dummy", "osc_32k"}; + static struct clk_hw_onecell_data *clk_hw_data; static struct clk_hw **hws; @@ -405,6 +410,13 @@ static int imx8mn_clocks_probe(struct platform_device *pdev) hws[IMX8MN_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2); hws[IMX8MN_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1); + hws[IMX8MN_CLK_CLKOUT1_SEL] = imx_clk_hw_mux("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels)); + hws[IMX8MN_CLK_CLKOUT1_DIV] = imx_clk_hw_divider("clkout1_div", "clkout1_sel", base + 0x128, 0, 4); + hws[IMX8MN_CLK_CLKOUT1] = imx_clk_hw_gate("clkout1", "clkout1_div", base + 0x128, 8); + hws[IMX8MN_CLK_CLKOUT2_SEL] = imx_clk_hw_mux("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels)); + hws[IMX8MN_CLK_CLKOUT2_DIV] = imx_clk_hw_divider("clkout2_div", "clkout2_sel", base + 0x128, 16, 4); + hws[IMX8MN_CLK_CLKOUT2] = imx_clk_hw_gate("clkout2", "clkout2_div", base + 0x128, 24); + np = dev->of_node; base = devm_platform_ioremap_resource(pdev, 0); if (WARN_ON(IS_ERR(base))) { diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h index 621ea0e87c67..d24b627cb2e7 100644 --- a/include/dt-bindings/clock/imx8mn-clock.h +++ b/include/dt-bindings/clock/imx8mn-clock.h @@ -234,6 +234,13 @@ #define IMX8MN_CLK_A53_CORE 214 -#define IMX8MN_CLK_END 215 +#define IMX8MN_CLK_CLKOUT1_SEL 215 +#define IMX8MN_CLK_CLKOUT1_DIV 216 +#define IMX8MN_CLK_CLKOUT1 217 +#define IMX8MN_CLK_CLKOUT2_SEL 218 +#define IMX8MN_CLK_CLKOUT2_DIV 219 +#define IMX8MN_CLK_CLKOUT2 220 + +#define IMX8MN_CLK_END 221 #endif
clkout1 and clkout2 allow to supply clocks from the SoC to the board, which is used by some board designs to provide reference clocks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- This hasn't been tested on HW, but is just based on the reference manual. --- drivers/clk/imx/clk-imx8mn.c | 12 ++++++++++++ include/dt-bindings/clock/imx8mn-clock.h | 9 ++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)