diff mbox series

[5/5] drm/sun4i: dw-hdmi: Fix max. frequency for H6

Message ID 20210204184710.1880895-6-jernej.skrabec@siol.net (mailing list archive)
State Not Applicable, archived
Headers show
Series sunxi: fix H6 HDMI related issues | expand

Commit Message

Jernej Škrabec Feb. 4, 2021, 6:47 p.m. UTC
It turns out that reasoning for lowering max. supported frequency is
wrong. Scrambling works just fine. Several now fixed bugs prevented
proper functioning, even with rates lower than 340 MHz. Issues were just
more pronounced with higher frequencies.

Fix that by allowing max. supported frequency in HW and fix the comment.

Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6")
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

Comments

Chen-Yu Tsai Feb. 5, 2021, 3:23 a.m. UTC | #1
On Fri, Feb 5, 2021 at 2:48 AM Jernej Skrabec <jernej.skrabec@siol.net> wrote:
>
> It turns out that reasoning for lowering max. supported frequency is
> wrong. Scrambling works just fine. Several now fixed bugs prevented
> proper functioning, even with rates lower than 340 MHz. Issues were just
> more pronounced with higher frequencies.
>
> Fix that by allowing max. supported frequency in HW and fix the comment.
>
> Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6")
> Tested-by: Andre Heider <a.heider@gmail.com>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index 23773a5e0650..bbdfd5e26ec8 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -47,11 +47,9 @@  sun8i_dw_hdmi_mode_valid_h6(struct dw_hdmi *hdmi, void *data,
 {
 	/*
 	 * Controller support maximum of 594 MHz, which correlates to
-	 * 4K@60Hz 4:4:4 or RGB. However, for frequencies greater than
-	 * 340 MHz scrambling has to be enabled. Because scrambling is
-	 * not yet implemented, just limit to 340 MHz for now.
+	 * 4K@60Hz 4:4:4 or RGB.
 	 */
-	if (mode->clock > 340000)
+	if (mode->clock > 594000)
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;