@@ -2,7 +2,7 @@
/*
* System Control and Power Interface (SCMI) Protocol based clock driver
*
- * Copyright (C) 2018 ARM Ltd.
+ * Copyright (C) 2018-2021 ARM Ltd.
*/
#include <linux/clk-provider.h>
@@ -13,11 +13,13 @@
#include <linux/scmi_protocol.h>
#include <asm/div64.h>
+static const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
+
struct scmi_clk {
u32 id;
struct clk_hw hw;
const struct scmi_clock_info *info;
- const struct scmi_handle *handle;
+ const struct scmi_protocol_handle *ph;
};
#define to_scmi_clk(clk) container_of(clk, struct scmi_clk, hw)
@@ -29,7 +31,7 @@ static unsigned long scmi_clk_recalc_rate(struct clk_hw *hw,
u64 rate;
struct scmi_clk *clk = to_scmi_clk(hw);
- ret = clk->handle->clk_ops->rate_get(clk->handle, clk->id, &rate);
+ ret = scmi_proto_clk_ops->rate_get(clk->ph, clk->id, &rate);
if (ret)
return 0;
return rate;
@@ -69,21 +71,21 @@ static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct scmi_clk *clk = to_scmi_clk(hw);
- return clk->handle->clk_ops->rate_set(clk->handle, clk->id, rate);
+ return scmi_proto_clk_ops->rate_set(clk->ph, clk->id, rate);
}
static int scmi_clk_enable(struct clk_hw *hw)
{
struct scmi_clk *clk = to_scmi_clk(hw);
- return clk->handle->clk_ops->enable(clk->handle, clk->id);
+ return scmi_proto_clk_ops->enable(clk->ph, clk->id);
}
static void scmi_clk_disable(struct clk_hw *hw)
{
struct scmi_clk *clk = to_scmi_clk(hw);
- clk->handle->clk_ops->disable(clk->handle, clk->id);
+ scmi_proto_clk_ops->disable(clk->ph, clk->id);
}
static const struct clk_ops scmi_clk_ops = {
@@ -142,11 +144,17 @@ static int scmi_clocks_probe(struct scmi_device *sdev)
struct device *dev = &sdev->dev;
struct device_node *np = dev->of_node;
const struct scmi_handle *handle = sdev->handle;
+ struct scmi_protocol_handle *ph;
- if (!handle || !handle->clk_ops)
+ if (!handle)
return -ENODEV;
- count = handle->clk_ops->count_get(handle);
+ scmi_proto_clk_ops =
+ handle->devm_protocol_get(sdev, SCMI_PROTOCOL_CLOCK, &ph);
+ if (IS_ERR(scmi_proto_clk_ops))
+ return PTR_ERR(scmi_proto_clk_ops);
+
+ count = scmi_proto_clk_ops->count_get(ph);
if (count < 0) {
dev_err(dev, "%pOFn: invalid clock output count\n", np);
return -EINVAL;
@@ -167,14 +175,14 @@ static int scmi_clocks_probe(struct scmi_device *sdev)
if (!sclk)
return -ENOMEM;
- sclk->info = handle->clk_ops->info_get(handle, idx);
+ sclk->info = scmi_proto_clk_ops->info_get(ph, idx);
if (!sclk->info) {
dev_dbg(dev, "invalid clock info for idx %d\n", idx);
continue;
}
sclk->id = idx;
- sclk->handle = handle;
+ sclk->ph = ph;
err = scmi_clk_ops_init(dev, sclk);
if (err) {
Port driver to the new SCMI Clock interface based on protocol handles and common devm_get_ops(). Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- v7 -> v8 - renamed local clk_ops to scmi_proto_clk_ops v6 -> v7 - fixed Copyright - renamed non-static function to fit scmi_<OBJ>_<ACTION> naming pattern v4 --> v5 - using renamed devm_get/put_protocol --- drivers/clk/clk-scmi.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)