| Message ID | 20210327110305.3289784-24-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [v3,01/25] clk: fixed: add devm helper for clk_hw_register_fixed_factor() | expand |
On 2021-03-27 04:03, Dmitry Baryshkov wrote: > The 7nm, 10nm and 14nm drivers would store interim data used during > VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this > data > structures to the onstack storage. While we are at it, drop > unused/static 'config' data, unused config fields, etc. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> > --- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++------- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++-------------- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------ > 3 files changed, 220 insertions(+), 447 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > index b937e77b3c37..1fbb54f4df98 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c > @@ -36,43 +36,25 @@ > */ > > #define VCO_REF_CLK_RATE 19200000 > - > -struct dsi_pll_regs { > - u32 pll_prop_gain_rate; > - u32 pll_lockdet_rate; > - u32 decimal_div_start; > - u32 frac_div_start_low; > - u32 frac_div_start_mid; > - u32 frac_div_start_high; > - u32 pll_clock_inverters; > - u32 ssc_stepsize_low; > - u32 ssc_stepsize_high; > - u32 ssc_div_per_low; > - u32 ssc_div_per_high; > - u32 ssc_adjper_low; > - u32 ssc_adjper_high; > - u32 ssc_control; > -}; > +#define FRAC_BITS 18 > > /* v3.0.0 10nm implementation that requires the old timings settings > */ > #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0) > > struct dsi_pll_config { > - u32 ref_freq; > - bool div_override; > - u32 output_div; > - bool ignore_frac; > - bool disable_prescaler; > bool enable_ssc; > bool ssc_center; > - u32 dec_bits; > - u32 frac_bits; > - u32 lock_timer; > u32 ssc_freq; > u32 ssc_offset; > u32 ssc_adj_per; > - u32 thresh_cycles; > - u32 refclk_cycles; > + > + /* out */ > + u32 pll_prop_gain_rate; > + u32 decimal_div_start; > + u32 frac_div_start; > + u32 pll_clock_inverters; > + u32 ssc_stepsize; > + u32 ssc_div_per; > }; > > struct pll_10nm_cached_state { > @@ -88,15 +70,11 @@ struct dsi_pll_10nm { > > struct msm_dsi_phy *phy; > > - u64 vco_ref_clk_rate; > u64 vco_current_rate; > > /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ > spinlock_t postdiv_lock; > > - struct dsi_pll_config pll_configuration; > - struct dsi_pll_regs reg_setup; > - > struct pll_10nm_cached_state cached_state; > > struct dsi_pll_10nm *slave; > @@ -110,34 +88,19 @@ struct dsi_pll_10nm { > */ > static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; > > -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) > +static void dsi_pll_setup_config(struct dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - > - config->ref_freq = pll->vco_ref_clk_rate; > - config->output_div = 1; > - config->dec_bits = 8; > - config->frac_bits = 18; > - config->lock_timer = 64; > config->ssc_freq = 31500; > config->ssc_offset = 5000; > config->ssc_adj_per = 2; > - config->thresh_cycles = 32; > - config->refclk_cycles = 256; > - > - config->div_override = false; > - config->ignore_frac = false; > - config->disable_prescaler = false; > > config->enable_ssc = false; > - config->ssc_center = 0; > + config->ssc_center = false; > } > > -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) > +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct > dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - struct dsi_pll_regs *regs = &pll->reg_setup; > - u64 fref = pll->vco_ref_clk_rate; > + u64 fref = VCO_REF_CLK_RATE; > u64 pll_freq; > u64 divider; > u64 dec, dec_multiple; > @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct > dsi_pll_10nm *pll) > > pll_freq = pll->vco_current_rate; > > - if (config->disable_prescaler) > - divider = fref; > - else > - divider = fref * 2; > + divider = fref * 2; > > - multiplier = 1 << config->frac_bits; > + multiplier = 1 << FRAC_BITS; > dec_multiple = div_u64(pll_freq * multiplier, divider); > dec = div_u64_rem(dec_multiple, multiplier, &frac); > > if (pll_freq <= 1900000000UL) > - regs->pll_prop_gain_rate = 8; > + config->pll_prop_gain_rate = 8; > else if (pll_freq <= 3000000000UL) > - regs->pll_prop_gain_rate = 10; > + config->pll_prop_gain_rate = 10; > else > - regs->pll_prop_gain_rate = 12; > + config->pll_prop_gain_rate = 12; > if (pll_freq < 1100000000UL) > - regs->pll_clock_inverters = 8; > + config->pll_clock_inverters = 8; > else > - regs->pll_clock_inverters = 0; > + config->pll_clock_inverters = 0; > > - regs->pll_lockdet_rate = config->lock_timer; > - regs->decimal_div_start = dec; > - regs->frac_div_start_low = (frac & 0xff); > - regs->frac_div_start_mid = (frac & 0xff00) >> 8; > - regs->frac_div_start_high = (frac & 0x30000) >> 16; > + config->decimal_div_start = dec; > + config->frac_div_start = frac; > } > > #define SSC_CENTER BIT(0) > #define SSC_EN BIT(1) > > -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) > +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct > dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - struct dsi_pll_regs *regs = &pll->reg_setup; > u32 ssc_per; > u32 ssc_mod; > u64 ssc_step_size; > @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm > *pll) > return; > } > > - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - > 1; > + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - > 1; > ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); > ssc_per -= ssc_mod; > > - frac = regs->frac_div_start_low | > - (regs->frac_div_start_mid << 8) | > - (regs->frac_div_start_high << 16); > - ssc_step_size = regs->decimal_div_start; > - ssc_step_size *= (1 << config->frac_bits); > + frac = config->frac_div_start; > + ssc_step_size = config->decimal_div_start; > + ssc_step_size *= (1 << FRAC_BITS); > ssc_step_size += frac; > ssc_step_size *= config->ssc_offset; > ssc_step_size *= (config->ssc_adj_per + 1); > ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); > ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); > > - regs->ssc_div_per_low = ssc_per & 0xFF; > - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; > - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); > - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); > - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; > - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; > - > - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; > + config->ssc_div_per = ssc_per; > + config->ssc_stepsize = ssc_step_size; > > pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", > - regs->decimal_div_start, frac, config->frac_bits); > + config->decimal_div_start, frac, FRAC_BITS); > pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", > ssc_per, (u32)ssc_step_size, config->ssc_adj_per); > } > > -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) > +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct > dsi_pll_config *config) > { > void __iomem *base = pll->phy->pll_base; > - struct dsi_pll_regs *regs = &pll->reg_setup; > > - if (pll->pll_configuration.enable_ssc) { > + if (config->enable_ssc) { > pr_debug("SSC is enabled\n"); > > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, > - regs->ssc_stepsize_low); > + config->ssc_stepsize & 0xff); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, > - regs->ssc_stepsize_high); > + config->ssc_stepsize >> 8); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, > - regs->ssc_div_per_low); > + config->ssc_div_per & 0xff); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, > - regs->ssc_div_per_high); > + config->ssc_div_per >> 8); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, > - regs->ssc_adjper_low); > + config->ssc_adj_per & 0xff); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, > - regs->ssc_adjper_high); > + config->ssc_adj_per >> 8); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, > - SSC_EN | regs->ssc_control); > + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); > } > } > > @@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct > dsi_pll_10nm *pll) > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); > } > > -static void dsi_pll_commit(struct dsi_pll_10nm *pll) > +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct > dsi_pll_config *config) > { > void __iomem *base = pll->phy->pll_base; > - struct dsi_pll_regs *reg = &pll->reg_setup; > > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, > - reg->decimal_div_start); > + config->decimal_div_start); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, > - reg->frac_div_start_low); > + config->frac_div_start & 0xff); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, > - reg->frac_div_start_mid); > + (config->frac_div_start & 0xff00) >> 8); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, > - reg->frac_div_start_high); > - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, > - reg->pll_lockdet_rate); > + (config->frac_div_start & 0x30000) >> 16); > + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); > dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, > - reg->pll_clock_inverters); > + config->pll_clock_inverters); > } > > static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long > rate, > unsigned long parent_rate) > { > struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); > + struct dsi_pll_config config; > > DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate, > parent_rate); > > pll_10nm->vco_current_rate = rate; > - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; > > - dsi_pll_setup_config(pll_10nm); > + dsi_pll_setup_config(&config); > > - dsi_pll_calc_dec_frac(pll_10nm); > + dsi_pll_calc_dec_frac(pll_10nm, &config); > > - dsi_pll_calc_ssc(pll_10nm); > + dsi_pll_calc_ssc(pll_10nm, &config); > > - dsi_pll_commit(pll_10nm); > + dsi_pll_commit(pll_10nm, &config); > > dsi_pll_config_hzindep_reg(pll_10nm); > > - dsi_pll_ssc_commit(pll_10nm); > + dsi_pll_ssc_commit(pll_10nm, &config); > > /* flush, ensure all register writes are done*/ > wmb(); > @@ -461,9 +405,8 @@ static unsigned long > dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate) > { > struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); > - struct dsi_pll_config *config = &pll_10nm->pll_configuration; > void __iomem *base = pll_10nm->phy->pll_base; > - u64 ref_clk = pll_10nm->vco_ref_clk_rate; > + u64 ref_clk = VCO_REF_CLK_RATE; > u64 vco_rate = 0x0; > u64 multiplier; > u32 frac; > @@ -483,7 +426,7 @@ static unsigned long > dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, > * TODO: > * 1. Assumes prescaler is disabled > */ > - multiplier = 1 << config->frac_bits; > + multiplier = 1 << FRAC_BITS; > pll_freq = dec * (ref_clk * 2); > tmp64 = (ref_clk * 2 * frac); > pll_freq += div_u64(tmp64, multiplier); > @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct > msm_dsi_phy *phy) > val |= cached->pll_mux; > dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); > > - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, > pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); > + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, > pll_10nm->vco_current_rate, VCO_REF_CLK_RATE); > if (ret) { > DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev, > "restore vco rate failed. ret=%d\n", ret); > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > index 8b4865c5796d..d08ad0c632b4 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > @@ -37,51 +37,19 @@ > #define VCO_MIN_RATE 1300000000UL > #define VCO_MAX_RATE 2600000000UL > > -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 > +struct dsi_pll_config { > + u64 vco_current_rate; > > -struct dsi_pll_input { > - u32 fref; /* reference clk */ > - u32 fdata; /* bit clock rate */ > - u32 dsiclk_sel; /* Mux configuration (see diagram) */ > u32 ssc_en; /* SSC enable/disable */ > - u32 ldo_en; > > /* fixed params */ > - u32 refclk_dbler_en; > - u32 vco_measure_time; > - u32 kvco_measure_time; > - u32 bandgap_timer; > - u32 pll_wakeup_timer; > u32 plllock_cnt; > - u32 plllock_rng; > u32 ssc_center; > u32 ssc_adj_period; > u32 ssc_spread; > u32 ssc_freq; > - u32 pll_ie_trim; > - u32 pll_ip_trim; > - u32 pll_iptat_trim; > - u32 pll_cpcset_cur; > - u32 pll_cpmset_cur; > - > - u32 pll_icpmset; > - u32 pll_icpcset; > - > - u32 pll_icpmset_p; > - u32 pll_icpmset_m; > - > - u32 pll_icpcset_p; > - u32 pll_icpcset_m; > - > - u32 pll_lpf_res1; > - u32 pll_lpf_cap1; > - u32 pll_lpf_cap2; > - u32 pll_c3ctrl; > - u32 pll_r3ctrl; > -}; > > -struct dsi_pll_output { > - u32 pll_txclk_en; > + /* calculated */ > u32 dec_start; > u32 div_frac_start; > u32 ssc_period; > @@ -91,19 +59,6 @@ struct dsi_pll_output { > u32 pll_vco_count; > u32 pll_kvco_div_ref; > u32 pll_kvco_count; > - u32 pll_misc1; > - u32 pll_lpf2_postdiv; > - u32 pll_resetsm_cntrl; > - u32 pll_resetsm_cntrl2; > - u32 pll_resetsm_cntrl5; > - u32 pll_kvco_code; > - > - u32 cmn_clk_cfg0; > - u32 cmn_clk_cfg1; > - u32 cmn_ldo_cntrl; > - > - u32 pll_postdiv; > - u32 fcvo; > }; > > struct pll_14nm_cached_state { > @@ -117,15 +72,9 @@ struct dsi_pll_14nm { > > struct msm_dsi_phy *phy; > > - struct dsi_pll_input in; > - struct dsi_pll_output out; > - > /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ > spinlock_t postdiv_lock; > > - u64 vco_current_rate; > - u64 vco_ref_clk_rate; > - > struct pll_14nm_cached_state cached_state; > > struct dsi_pll_14nm *slave; > @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct > dsi_pll_14nm *pll_14nm, > return pll_locked; > } > > -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) > +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) > { > - pll->in.fref = pll->vco_ref_clk_rate; > - pll->in.fdata = 0; > - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ > - pll->in.ldo_en = 0; /* disabled for now */ > - > /* fixed input */ > - pll->in.refclk_dbler_en = 0; > - pll->in.vco_measure_time = 5; > - pll->in.kvco_measure_time = 5; > - pll->in.bandgap_timer = 4; > - pll->in.pll_wakeup_timer = 5; > - pll->in.plllock_cnt = 1; > - pll->in.plllock_rng = 0; > + pconf->plllock_cnt = 1; > > /* > * SSC is enabled by default. We might need DT props for configuring > * some SSC params like PPM and center/down spread etc. > */ > - pll->in.ssc_en = 1; > - pll->in.ssc_center = 0; /* down spread by default */ > - pll->in.ssc_spread = 5; /* PPM / 1000 */ > - pll->in.ssc_freq = 31500; /* default recommended */ > - pll->in.ssc_adj_period = 37; > - > - pll->in.pll_ie_trim = 4; > - pll->in.pll_ip_trim = 4; > - pll->in.pll_cpcset_cur = 1; > - pll->in.pll_cpmset_cur = 1; > - pll->in.pll_icpmset = 4; > - pll->in.pll_icpcset = 4; > - pll->in.pll_icpmset_p = 0; > - pll->in.pll_icpmset_m = 0; > - pll->in.pll_icpcset_p = 0; > - pll->in.pll_icpcset_m = 0; > - pll->in.pll_lpf_res1 = 3; > - pll->in.pll_lpf_cap1 = 11; > - pll->in.pll_lpf_cap2 = 1; > - pll->in.pll_iptat_trim = 7; > - pll->in.pll_c3ctrl = 2; > - pll->in.pll_r3ctrl = 1; > + pconf->ssc_en = 1; > + pconf->ssc_center = 0; /* down spread by default */ > + pconf->ssc_spread = 5; /* PPM / 1000 */ > + pconf->ssc_freq = 31500; /* default recommended */ > + pconf->ssc_adj_period = 37; > } > > #define CEIL(x, y) (((x) + ((y) - 1)) / (y)) > > -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) > +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct > dsi_pll_config *pconf) > { > u32 period, ssc_period; > u32 ref, rem; > u64 step_size; > > - DBG("vco=%lld ref=%lld", pll->vco_current_rate, > pll->vco_ref_clk_rate); > + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE); > > - ssc_period = pll->in.ssc_freq / 500; > - period = (u32)pll->vco_ref_clk_rate / 1000; > + ssc_period = pconf->ssc_freq / 500; > + period = (u32)VCO_REF_CLK_RATE / 1000; > ssc_period = CEIL(period, ssc_period); > ssc_period -= 1; > - pll->out.ssc_period = ssc_period; > + pconf->ssc_period = ssc_period; > > - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, > - pll->in.ssc_spread, pll->out.ssc_period); > + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq, > + pconf->ssc_spread, pconf->ssc_period); > > - step_size = (u32)pll->vco_current_rate; > - ref = pll->vco_ref_clk_rate; > + step_size = (u32)pconf->vco_current_rate; > + ref = VCO_REF_CLK_RATE; > ref /= 1000; > step_size = div_u64(step_size, ref); > step_size <<= 20; > step_size = div_u64(step_size, 1000); > - step_size *= pll->in.ssc_spread; > + step_size *= pconf->ssc_spread; > step_size = div_u64(step_size, 1000); > - step_size *= (pll->in.ssc_adj_period + 1); > + step_size *= (pconf->ssc_adj_period + 1); > > rem = 0; > step_size = div_u64_rem(step_size, ssc_period + 1, &rem); > @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct dsi_pll_14nm > *pll) > > step_size &= 0x0ffff; /* take lower 16 bits */ > > - pll->out.ssc_step_size = step_size; > + pconf->ssc_step_size = step_size; > } > > -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) > +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct > dsi_pll_config *pconf) > { > - struct dsi_pll_input *pin = &pll->in; > - struct dsi_pll_output *pout = &pll->out; > u64 multiplier = BIT(20); > u64 dec_start_multiple, dec_start, pll_comp_val; > u32 duration, div_frac_start; > - u64 vco_clk_rate = pll->vco_current_rate; > - u64 fref = pll->vco_ref_clk_rate; > + u64 vco_clk_rate = pconf->vco_current_rate; > + u64 fref = VCO_REF_CLK_RATE; > > DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); > > @@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct > dsi_pll_14nm *pll) > > dec_start = div_u64(dec_start_multiple, multiplier); > > - pout->dec_start = (u32)dec_start; > - pout->div_frac_start = div_frac_start; > + pconf->dec_start = (u32)dec_start; > + pconf->div_frac_start = div_frac_start; > > - if (pin->plllock_cnt == 0) > + if (pconf->plllock_cnt == 0) > duration = 1024; > - else if (pin->plllock_cnt == 1) > + else if (pconf->plllock_cnt == 1) > duration = 256; > - else if (pin->plllock_cnt == 2) > + else if (pconf->plllock_cnt == 2) > duration = 128; > else > duration = 32; > @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct > dsi_pll_14nm *pll) > pll_comp_val = div_u64(pll_comp_val, multiplier); > do_div(pll_comp_val, 10); > > - pout->plllock_cmp = (u32)pll_comp_val; > - > - pout->pll_txclk_en = 1; > - pout->cmn_ldo_cntrl = 0x3c; > + pconf->plllock_cmp = (u32)pll_comp_val; > } > > static u32 pll_14nm_kvco_slop(u32 vrate) > @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate) > return slop; > } > > -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) > +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct > dsi_pll_config *pconf) > { > - struct dsi_pll_input *pin = &pll->in; > - struct dsi_pll_output *pout = &pll->out; > - u64 vco_clk_rate = pll->vco_current_rate; > - u64 fref = pll->vco_ref_clk_rate; > + u64 vco_clk_rate = pconf->vco_current_rate; > + u64 fref = VCO_REF_CLK_RATE; > + u32 vco_measure_time = 5; > + u32 kvco_measure_time = 5; > u64 data; > u32 cnt; > > - data = fref * pin->vco_measure_time; > + data = fref * vco_measure_time; > do_div(data, 1000000); > data &= 0x03ff; /* 10 bits */ > data -= 2; > - pout->pll_vco_div_ref = data; > + pconf->pll_vco_div_ref = data; > > data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ > - data *= pin->vco_measure_time; > + data *= vco_measure_time; > do_div(data, 10); > - pout->pll_vco_count = data; > + pconf->pll_vco_count = data; > > - data = fref * pin->kvco_measure_time; > + data = fref * kvco_measure_time; > do_div(data, 1000000); > data &= 0x03ff; /* 10 bits */ > data -= 1; > - pout->pll_kvco_div_ref = data; > + pconf->pll_kvco_div_ref = data; > > cnt = pll_14nm_kvco_slop(vco_clk_rate); > cnt *= 2; > cnt /= 100; > - cnt *= pin->kvco_measure_time; > - pout->pll_kvco_count = cnt; > - > - pout->pll_misc1 = 16; > - pout->pll_resetsm_cntrl = 48; > - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; > - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; > - pout->pll_kvco_code = 0; > + cnt *= kvco_measure_time; > + pconf->pll_kvco_count = cnt; > } > > -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) > +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct > dsi_pll_config *pconf) > { > void __iomem *base = pll->phy->pll_base; > - struct dsi_pll_input *pin = &pll->in; > - struct dsi_pll_output *pout = &pll->out; > u8 data; > > - data = pin->ssc_adj_period; > + data = pconf->ssc_adj_period; > data &= 0x0ff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); > - data = (pin->ssc_adj_period >> 8); > + data = (pconf->ssc_adj_period >> 8); > data &= 0x03; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); > > - data = pout->ssc_period; > + data = pconf->ssc_period; > data &= 0x0ff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); > - data = (pout->ssc_period >> 8); > + data = (pconf->ssc_period >> 8); > data &= 0x0ff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); > > - data = pout->ssc_step_size; > + data = pconf->ssc_step_size; > data &= 0x0ff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); > - data = (pout->ssc_step_size >> 8); > + data = (pconf->ssc_step_size >> 8); > data &= 0x0ff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); > > - data = (pin->ssc_center & 0x01); > + data = (pconf->ssc_center & 0x01); > data <<= 1; > data |= 0x01; /* enable */ > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); > @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm > *pll) > } > > static void pll_db_commit_common(struct dsi_pll_14nm *pll, > - struct dsi_pll_input *pin, > - struct dsi_pll_output *pout) > + struct dsi_pll_config *pconf) > { > void __iomem *base = pll->phy->pll_base; > u8 data; > @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct > dsi_pll_14nm *pll, > data = 0; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); > > - data = pout->pll_txclk_en; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1); > > - data = pout->pll_resetsm_cntrl; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); > - data = pout->pll_resetsm_cntrl2; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); > - data = pout->pll_resetsm_cntrl5; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3); > /* bandgap_timer */ > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /* > pll_wakeup_timer */ > > - data = pout->pll_vco_div_ref & 0xff; > + data = pconf->pll_vco_div_ref & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); > - data = (pout->pll_vco_div_ref >> 8) & 0x3; > + data = (pconf->pll_vco_div_ref >> 8) & 0x3; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); > > - data = pout->pll_kvco_div_ref & 0xff; > + data = pconf->pll_kvco_div_ref & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); > - data = (pout->pll_kvco_div_ref >> 8) & 0x3; > + data = (pconf->pll_kvco_div_ref >> 8) & 0x3; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); > > - data = pout->pll_misc1; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16); > > - data = pin->pll_ie_trim; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4); > > - data = pin->pll_ip_trim; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4); > > - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1); > > - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0); > > - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0); > > - data = pin->pll_icpmset << 3 | pin->pll_icpcset; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4); > > - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11); > > - data = pin->pll_iptat_trim; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7); > > - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2); > } > > static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) > @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct > dsi_pll_14nm *pll_14nm) > } > > static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, > - struct dsi_pll_input *pin, > - struct dsi_pll_output *pout) > + struct dsi_pll_config *pconf) > { > void __iomem *base = pll->phy->pll_base; > void __iomem *cmn_base = pll->phy->base; > @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct > dsi_pll_14nm *pll, > > DBG("DSI%d PLL", pll->phy->id); > > - data = pout->cmn_ldo_cntrl; > - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); > + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c); > > - pll_db_commit_common(pll, pin, pout); > + pll_db_commit_common(pll, pconf); > > pll_14nm_software_reset(pll); > > - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ > - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); > + /* Use the /2 path in Mux */ > + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1); > > data = 0xff; /* data, clk, pll normal operation */ > dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); > > /* configure the frequency dependent pll registers */ > - data = pout->dec_start; > + data = pconf->dec_start; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); > > - data = pout->div_frac_start & 0xff; > + data = pconf->div_frac_start & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); > - data = (pout->div_frac_start >> 8) & 0xff; > + data = (pconf->div_frac_start >> 8) & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); > - data = (pout->div_frac_start >> 16) & 0xf; > + data = (pconf->div_frac_start >> 16) & 0xf; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); > > - data = pout->plllock_cmp & 0xff; > + data = pconf->plllock_cmp & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); > > - data = (pout->plllock_cmp >> 8) & 0xff; > + data = (pconf->plllock_cmp >> 8) & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); > > - data = (pout->plllock_cmp >> 16) & 0x3; > + data = (pconf->plllock_cmp >> 16) & 0x3; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); > > - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; > + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */ > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); > > - data = pout->pll_vco_count & 0xff; > + data = pconf->pll_vco_count & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); > - data = (pout->pll_vco_count >> 8) & 0xff; > + data = (pconf->pll_vco_count >> 8) & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); > > - data = pout->pll_kvco_count & 0xff; > + data = pconf->pll_kvco_count & 0xff; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); > - data = (pout->pll_kvco_count >> 8) & 0x3; > + data = (pconf->pll_kvco_count >> 8) & 0x3; > dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); > > - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; > - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); > + /* > + * High nibble configures the post divider internal to the VCO. It's > + * fixed to divide by 1 for now. > + * > + * 0: divided by 1 > + * 1: divided by 2 > + * 2: divided by 4 > + * 3: divided by 8 > + */ > + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << 4 | > 3); > > - if (pin->ssc_en) > - pll_db_commit_ssc(pll); > + if (pconf->ssc_en) > + pll_db_commit_ssc(pll, pconf); > > wmb(); /* make sure register committed */ > } > @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct > clk_hw *hw, unsigned long rate, > unsigned long parent_rate) > { > struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw); > - struct dsi_pll_input *pin = &pll_14nm->in; > - struct dsi_pll_output *pout = &pll_14nm->out; > + struct dsi_pll_config conf; > > DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate, > parent_rate); > > - pll_14nm->vco_current_rate = rate; > - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; > - > - dsi_pll_14nm_input_init(pll_14nm); > - > - /* > - * This configures the post divider internal to the VCO. It's > - * fixed to divide by 1 for now. > - * > - * tx_band = pll_postdiv. > - * 0: divided by 1 > - * 1: divided by 2 > - * 2: divided by 4 > - * 3: divided by 8 > - */ > - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; > + dsi_pll_14nm_config_init(&conf); > + conf.vco_current_rate = rate; > > - pll_14nm_dec_frac_calc(pll_14nm); > + pll_14nm_dec_frac_calc(pll_14nm, &conf); > > - if (pin->ssc_en) > - pll_14nm_ssc_calc(pll_14nm); > + if (conf.ssc_en) > + pll_14nm_ssc_calc(pll_14nm, &conf); > > - pll_14nm_calc_vco_count(pll_14nm); > + pll_14nm_calc_vco_count(pll_14nm, &conf); > > /* commit the slave DSI PLL registers if we're master. Note that we > * don't lock the slave PLL. We just ensure that the PLL/PHY > registers > @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct > clk_hw *hw, unsigned long rate, > if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { > struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; > > - pll_db_commit_14nm(pll_14nm_slave, pin, pout); > + pll_db_commit_14nm(pll_14nm_slave, &conf); > } > > - pll_db_commit_14nm(pll_14nm, pin, pout); > + pll_db_commit_14nm(pll_14nm, &conf); > > return 0; > } > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > index 4df237ad0eaf..ce6ae2fba993 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > @@ -36,43 +36,24 @@ > */ > > #define VCO_REF_CLK_RATE 19200000 > - > -struct dsi_pll_regs { > - u32 pll_prop_gain_rate; > - u32 pll_lockdet_rate; > - u32 decimal_div_start; > - u32 frac_div_start_low; > - u32 frac_div_start_mid; > - u32 frac_div_start_high; > - u32 pll_clock_inverters; > - u32 ssc_stepsize_low; > - u32 ssc_stepsize_high; > - u32 ssc_div_per_low; > - u32 ssc_div_per_high; > - u32 ssc_adjper_low; > - u32 ssc_adjper_high; > - u32 ssc_control; > -}; > +#define FRAC_BITS 18 > > /* Hardware is V4.1 */ > #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0) > > struct dsi_pll_config { > - u32 ref_freq; > - bool div_override; > - u32 output_div; > - bool ignore_frac; > - bool disable_prescaler; > bool enable_ssc; > bool ssc_center; > - u32 dec_bits; > - u32 frac_bits; > - u32 lock_timer; > u32 ssc_freq; > u32 ssc_offset; > u32 ssc_adj_per; > - u32 thresh_cycles; > - u32 refclk_cycles; > + > + /* out */ > + u32 decimal_div_start; > + u32 frac_div_start; > + u32 pll_clock_inverters; > + u32 ssc_stepsize; > + u32 ssc_div_per; > }; > > struct pll_7nm_cached_state { > @@ -88,15 +69,11 @@ struct dsi_pll_7nm { > > struct msm_dsi_phy *phy; > > - u64 vco_ref_clk_rate; > u64 vco_current_rate; > > /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ > spinlock_t postdiv_lock; > > - struct dsi_pll_config pll_configuration; > - struct dsi_pll_regs reg_setup; > - > struct pll_7nm_cached_state cached_state; > > struct dsi_pll_7nm *slave; > @@ -110,35 +87,20 @@ struct dsi_pll_7nm { > */ > static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; > > -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) > +static void dsi_pll_setup_config(struct dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - > - config->ref_freq = pll->vco_ref_clk_rate; > - config->output_div = 1; > - config->dec_bits = 8; > - config->frac_bits = 18; > - config->lock_timer = 64; > config->ssc_freq = 31500; > config->ssc_offset = 4800; > config->ssc_adj_per = 2; > - config->thresh_cycles = 32; > - config->refclk_cycles = 256; > - > - config->div_override = false; > - config->ignore_frac = false; > - config->disable_prescaler = false; > > /* TODO: ssc enable */ > config->enable_ssc = false; > config->ssc_center = 0; > } > > -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) > +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct > dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - struct dsi_pll_regs *regs = &pll->reg_setup; > - u64 fref = pll->vco_ref_clk_rate; > + u64 fref = VCO_REF_CLK_RATE; > u64 pll_freq; > u64 divider; > u64 dec, dec_multiple; > @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct > dsi_pll_7nm *pll) > > pll_freq = pll->vco_current_rate; > > - if (config->disable_prescaler) > - divider = fref; > - else > - divider = fref * 2; > + divider = fref * 2; > > - multiplier = 1 << config->frac_bits; > + multiplier = 1 << FRAC_BITS; > dec_multiple = div_u64(pll_freq * multiplier, divider); > div_u64_rem(dec_multiple, multiplier, &frac); > > dec = div_u64(dec_multiple, multiplier); > > if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)) > - regs->pll_clock_inverters = 0x28; > + config->pll_clock_inverters = 0x28; > else if (pll_freq <= 1000000000ULL) > - regs->pll_clock_inverters = 0xa0; > + config->pll_clock_inverters = 0xa0; > else if (pll_freq <= 2500000000ULL) > - regs->pll_clock_inverters = 0x20; > + config->pll_clock_inverters = 0x20; > else if (pll_freq <= 3020000000ULL) > - regs->pll_clock_inverters = 0x00; > + config->pll_clock_inverters = 0x00; > else > - regs->pll_clock_inverters = 0x40; > + config->pll_clock_inverters = 0x40; > > - regs->pll_lockdet_rate = config->lock_timer; > - regs->decimal_div_start = dec; > - regs->frac_div_start_low = (frac & 0xff); > - regs->frac_div_start_mid = (frac & 0xff00) >> 8; > - regs->frac_div_start_high = (frac & 0x30000) >> 16; > + config->decimal_div_start = dec; > + config->frac_div_start = frac; > } > > #define SSC_CENTER BIT(0) > #define SSC_EN BIT(1) > > -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) > +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct > dsi_pll_config *config) > { > - struct dsi_pll_config *config = &pll->pll_configuration; > - struct dsi_pll_regs *regs = &pll->reg_setup; > u32 ssc_per; > u32 ssc_mod; > u64 ssc_step_size; > @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm > *pll) > return; > } > > - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - > 1; > + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - > 1; > ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); > ssc_per -= ssc_mod; > > - frac = regs->frac_div_start_low | > - (regs->frac_div_start_mid << 8) | > - (regs->frac_div_start_high << 16); > - ssc_step_size = regs->decimal_div_start; > - ssc_step_size *= (1 << config->frac_bits); > + frac = config->frac_div_start; > + ssc_step_size = config->decimal_div_start; > + ssc_step_size *= (1 << FRAC_BITS); > ssc_step_size += frac; > ssc_step_size *= config->ssc_offset; > ssc_step_size *= (config->ssc_adj_per + 1); > ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); > ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); > > - regs->ssc_div_per_low = ssc_per & 0xFF; > - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; > - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); > - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); > - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; > - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; > - > - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; > + config->ssc_div_per = ssc_per; > + config->ssc_stepsize = ssc_step_size; > > pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", > - regs->decimal_div_start, frac, config->frac_bits); > + config->decimal_div_start, frac, FRAC_BITS); > pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", > ssc_per, (u32)ssc_step_size, config->ssc_adj_per); > } > > -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) > +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct > dsi_pll_config *config) > { > void __iomem *base = pll->phy->pll_base; > - struct dsi_pll_regs *regs = &pll->reg_setup; > > - if (pll->pll_configuration.enable_ssc) { > + if (config->enable_ssc) { > pr_debug("SSC is enabled\n"); > > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, > - regs->ssc_stepsize_low); > + config->ssc_stepsize & 0xff); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, > - regs->ssc_stepsize_high); > + config->ssc_stepsize >> 8); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, > - regs->ssc_div_per_low); > + config->ssc_div_per & 0xff); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, > - regs->ssc_div_per_high); > + config->ssc_div_per >> 8); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, > - regs->ssc_adjper_low); > + config->ssc_adj_per & 0xff); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, > - regs->ssc_adjper_high); > + config->ssc_adj_per >> 8); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, > - SSC_EN | regs->ssc_control); > + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); > } > } > > @@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct > dsi_pll_7nm *pll) > } > } > > -static void dsi_pll_commit(struct dsi_pll_7nm *pll) > +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct > dsi_pll_config *config) > { > void __iomem *base = pll->phy->pll_base; > - struct dsi_pll_regs *reg = &pll->reg_setup; > > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, > reg->decimal_div_start); > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, > reg->frac_div_start_low); > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, > reg->frac_div_start_mid); > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, > reg->frac_div_start_high); > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, > reg->pll_lockdet_rate); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, > config->decimal_div_start); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, > + config->frac_div_start & 0xff); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, > + (config->frac_div_start & 0xff00) >> 8); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, > + (config->frac_div_start & 0x30000) >> 16); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: > 0x00 for CPHY */ > - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, > reg->pll_clock_inverters); > + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, > config->pll_clock_inverters); > } > > static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long > rate, > unsigned long parent_rate) > { > struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); > + struct dsi_pll_config config; > > DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate, > parent_rate); > > pll_7nm->vco_current_rate = rate; > - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; > > - dsi_pll_setup_config(pll_7nm); > + dsi_pll_setup_config(&config); > > - dsi_pll_calc_dec_frac(pll_7nm); > + dsi_pll_calc_dec_frac(pll_7nm, &config); > > - dsi_pll_calc_ssc(pll_7nm); > + dsi_pll_calc_ssc(pll_7nm, &config); > > - dsi_pll_commit(pll_7nm); > + dsi_pll_commit(pll_7nm, &config); > > dsi_pll_config_hzindep_reg(pll_7nm); > > - dsi_pll_ssc_commit(pll_7nm); > + dsi_pll_ssc_commit(pll_7nm, &config); > > /* flush, ensure all register writes are done*/ > wmb(); > @@ -486,9 +433,8 @@ static unsigned long > dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate) > { > struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); > - struct dsi_pll_config *config = &pll_7nm->pll_configuration; > void __iomem *base = pll_7nm->phy->pll_base; > - u64 ref_clk = pll_7nm->vco_ref_clk_rate; > + u64 ref_clk = VCO_REF_CLK_RATE; > u64 vco_rate = 0x0; > u64 multiplier; > u32 frac; > @@ -508,7 +454,7 @@ static unsigned long > dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, > * TODO: > * 1. Assumes prescaler is disabled > */ > - multiplier = 1 << config->frac_bits; > + multiplier = 1 << FRAC_BITS; > pll_freq = dec * (ref_clk * 2); > tmp64 = (ref_clk * 2 * frac); > pll_freq += div_u64(tmp64, multiplier); > @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct msm_dsi_phy > *phy) > val |= cached->pll_mux; > dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); > > - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, > pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); > + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, > pll_7nm->vco_current_rate, VCO_REF_CLK_RATE); > if (ret) { > DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev, > "restore vco rate failed. ret=%d\n", ret);
On 30/03/2021 06:26, abhinavk@codeaurora.org wrote: > On 2021-03-27 04:03, Dmitry Baryshkov wrote: >> The 7nm, 10nm and 14nm drivers would store interim data used during >> VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data >> structures to the onstack storage. While we are at it, drop >> unused/static 'config' data, unused config fields, etc. >> >> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Thank you for the thorough review. I'll post v4 as soon as we agree on the patch 24. >> --- >> drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++------- >> drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++-------------- >> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------ >> 3 files changed, 220 insertions(+), 447 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c >> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c >> index b937e77b3c37..1fbb54f4df98 100644 >> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c >> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c >> @@ -36,43 +36,25 @@ >> */ >> >> #define VCO_REF_CLK_RATE 19200000 >> - >> -struct dsi_pll_regs { >> - u32 pll_prop_gain_rate; >> - u32 pll_lockdet_rate; >> - u32 decimal_div_start; >> - u32 frac_div_start_low; >> - u32 frac_div_start_mid; >> - u32 frac_div_start_high; >> - u32 pll_clock_inverters; >> - u32 ssc_stepsize_low; >> - u32 ssc_stepsize_high; >> - u32 ssc_div_per_low; >> - u32 ssc_div_per_high; >> - u32 ssc_adjper_low; >> - u32 ssc_adjper_high; >> - u32 ssc_control; >> -}; >> +#define FRAC_BITS 18 >> >> /* v3.0.0 10nm implementation that requires the old timings settings */ >> #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0) >> >> struct dsi_pll_config { >> - u32 ref_freq; >> - bool div_override; >> - u32 output_div; >> - bool ignore_frac; >> - bool disable_prescaler; >> bool enable_ssc; >> bool ssc_center; >> - u32 dec_bits; >> - u32 frac_bits; >> - u32 lock_timer; >> u32 ssc_freq; >> u32 ssc_offset; >> u32 ssc_adj_per; >> - u32 thresh_cycles; >> - u32 refclk_cycles; >> + >> + /* out */ >> + u32 pll_prop_gain_rate; >> + u32 decimal_div_start; >> + u32 frac_div_start; >> + u32 pll_clock_inverters; >> + u32 ssc_stepsize; >> + u32 ssc_div_per; >> }; >> >> struct pll_10nm_cached_state { >> @@ -88,15 +70,11 @@ struct dsi_pll_10nm { >> >> struct msm_dsi_phy *phy; >> >> - u64 vco_ref_clk_rate; >> u64 vco_current_rate; >> >> /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ >> spinlock_t postdiv_lock; >> >> - struct dsi_pll_config pll_configuration; >> - struct dsi_pll_regs reg_setup; >> - >> struct pll_10nm_cached_state cached_state; >> >> struct dsi_pll_10nm *slave; >> @@ -110,34 +88,19 @@ struct dsi_pll_10nm { >> */ >> static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; >> >> -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) >> +static void dsi_pll_setup_config(struct dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - >> - config->ref_freq = pll->vco_ref_clk_rate; >> - config->output_div = 1; >> - config->dec_bits = 8; >> - config->frac_bits = 18; >> - config->lock_timer = 64; >> config->ssc_freq = 31500; >> config->ssc_offset = 5000; >> config->ssc_adj_per = 2; >> - config->thresh_cycles = 32; >> - config->refclk_cycles = 256; >> - >> - config->div_override = false; >> - config->ignore_frac = false; >> - config->disable_prescaler = false; >> >> config->enable_ssc = false; >> - config->ssc_center = 0; >> + config->ssc_center = false; >> } >> >> -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) >> +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct >> dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> - u64 fref = pll->vco_ref_clk_rate; >> + u64 fref = VCO_REF_CLK_RATE; >> u64 pll_freq; >> u64 divider; >> u64 dec, dec_multiple; >> @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct >> dsi_pll_10nm *pll) >> >> pll_freq = pll->vco_current_rate; >> >> - if (config->disable_prescaler) >> - divider = fref; >> - else >> - divider = fref * 2; >> + divider = fref * 2; >> >> - multiplier = 1 << config->frac_bits; >> + multiplier = 1 << FRAC_BITS; >> dec_multiple = div_u64(pll_freq * multiplier, divider); >> dec = div_u64_rem(dec_multiple, multiplier, &frac); >> >> if (pll_freq <= 1900000000UL) >> - regs->pll_prop_gain_rate = 8; >> + config->pll_prop_gain_rate = 8; >> else if (pll_freq <= 3000000000UL) >> - regs->pll_prop_gain_rate = 10; >> + config->pll_prop_gain_rate = 10; >> else >> - regs->pll_prop_gain_rate = 12; >> + config->pll_prop_gain_rate = 12; >> if (pll_freq < 1100000000UL) >> - regs->pll_clock_inverters = 8; >> + config->pll_clock_inverters = 8; >> else >> - regs->pll_clock_inverters = 0; >> + config->pll_clock_inverters = 0; >> >> - regs->pll_lockdet_rate = config->lock_timer; >> - regs->decimal_div_start = dec; >> - regs->frac_div_start_low = (frac & 0xff); >> - regs->frac_div_start_mid = (frac & 0xff00) >> 8; >> - regs->frac_div_start_high = (frac & 0x30000) >> 16; >> + config->decimal_div_start = dec; >> + config->frac_div_start = frac; >> } >> >> #define SSC_CENTER BIT(0) >> #define SSC_EN BIT(1) >> >> -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) >> +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct >> dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> u32 ssc_per; >> u32 ssc_mod; >> u64 ssc_step_size; >> @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm >> *pll) >> return; >> } >> >> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / >> 2 - 1; >> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / >> 2 - 1; >> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); >> ssc_per -= ssc_mod; >> >> - frac = regs->frac_div_start_low | >> - (regs->frac_div_start_mid << 8) | >> - (regs->frac_div_start_high << 16); >> - ssc_step_size = regs->decimal_div_start; >> - ssc_step_size *= (1 << config->frac_bits); >> + frac = config->frac_div_start; >> + ssc_step_size = config->decimal_div_start; >> + ssc_step_size *= (1 << FRAC_BITS); >> ssc_step_size += frac; >> ssc_step_size *= config->ssc_offset; >> ssc_step_size *= (config->ssc_adj_per + 1); >> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); >> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); >> >> - regs->ssc_div_per_low = ssc_per & 0xFF; >> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; >> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); >> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); >> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; >> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; >> - >> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; >> + config->ssc_div_per = ssc_per; >> + config->ssc_stepsize = ssc_step_size; >> >> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", >> - regs->decimal_div_start, frac, config->frac_bits); >> + config->decimal_div_start, frac, FRAC_BITS); >> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", >> ssc_per, (u32)ssc_step_size, config->ssc_adj_per); >> } >> >> -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) >> +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct >> dsi_pll_config *config) >> { >> void __iomem *base = pll->phy->pll_base; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> >> - if (pll->pll_configuration.enable_ssc) { >> + if (config->enable_ssc) { >> pr_debug("SSC is enabled\n"); >> >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, >> - regs->ssc_stepsize_low); >> + config->ssc_stepsize & 0xff); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, >> - regs->ssc_stepsize_high); >> + config->ssc_stepsize >> 8); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, >> - regs->ssc_div_per_low); >> + config->ssc_div_per & 0xff); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, >> - regs->ssc_div_per_high); >> + config->ssc_div_per >> 8); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, >> - regs->ssc_adjper_low); >> + config->ssc_adj_per & 0xff); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, >> - regs->ssc_adjper_high); >> + config->ssc_adj_per >> 8); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, >> - SSC_EN | regs->ssc_control); >> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); >> } >> } >> >> @@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct >> dsi_pll_10nm *pll) >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); >> } >> >> -static void dsi_pll_commit(struct dsi_pll_10nm *pll) >> +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct >> dsi_pll_config *config) >> { >> void __iomem *base = pll->phy->pll_base; >> - struct dsi_pll_regs *reg = &pll->reg_setup; >> >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, >> 0x12); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, >> - reg->decimal_div_start); >> + config->decimal_div_start); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, >> - reg->frac_div_start_low); >> + config->frac_div_start & 0xff); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, >> - reg->frac_div_start_mid); >> + (config->frac_div_start & 0xff00) >> 8); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, >> - reg->frac_div_start_high); >> - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, >> - reg->pll_lockdet_rate); >> + (config->frac_div_start & 0x30000) >> 16); >> + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); >> dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, >> - reg->pll_clock_inverters); >> + config->pll_clock_inverters); >> } >> >> static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long >> rate, >> unsigned long parent_rate) >> { >> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); >> + struct dsi_pll_config config; >> >> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate, >> parent_rate); >> >> pll_10nm->vco_current_rate = rate; >> - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; >> >> - dsi_pll_setup_config(pll_10nm); >> + dsi_pll_setup_config(&config); >> >> - dsi_pll_calc_dec_frac(pll_10nm); >> + dsi_pll_calc_dec_frac(pll_10nm, &config); >> >> - dsi_pll_calc_ssc(pll_10nm); >> + dsi_pll_calc_ssc(pll_10nm, &config); >> >> - dsi_pll_commit(pll_10nm); >> + dsi_pll_commit(pll_10nm, &config); >> >> dsi_pll_config_hzindep_reg(pll_10nm); >> >> - dsi_pll_ssc_commit(pll_10nm); >> + dsi_pll_ssc_commit(pll_10nm, &config); >> >> /* flush, ensure all register writes are done*/ >> wmb(); >> @@ -461,9 +405,8 @@ static unsigned long >> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, >> unsigned long parent_rate) >> { >> struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); >> - struct dsi_pll_config *config = &pll_10nm->pll_configuration; >> void __iomem *base = pll_10nm->phy->pll_base; >> - u64 ref_clk = pll_10nm->vco_ref_clk_rate; >> + u64 ref_clk = VCO_REF_CLK_RATE; >> u64 vco_rate = 0x0; >> u64 multiplier; >> u32 frac; >> @@ -483,7 +426,7 @@ static unsigned long >> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, >> * TODO: >> * 1. Assumes prescaler is disabled >> */ >> - multiplier = 1 << config->frac_bits; >> + multiplier = 1 << FRAC_BITS; >> pll_freq = dec * (ref_clk * 2); >> tmp64 = (ref_clk * 2 * frac); >> pll_freq += div_u64(tmp64, multiplier); >> @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct >> msm_dsi_phy *phy) >> val |= cached->pll_mux; >> dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); >> >> - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, >> pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); >> + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, >> pll_10nm->vco_current_rate, VCO_REF_CLK_RATE); >> if (ret) { >> DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev, >> "restore vco rate failed. ret=%d\n", ret); >> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c >> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c >> index 8b4865c5796d..d08ad0c632b4 100644 >> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c >> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c >> @@ -37,51 +37,19 @@ >> #define VCO_MIN_RATE 1300000000UL >> #define VCO_MAX_RATE 2600000000UL >> >> -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 >> +struct dsi_pll_config { >> + u64 vco_current_rate; >> >> -struct dsi_pll_input { >> - u32 fref; /* reference clk */ >> - u32 fdata; /* bit clock rate */ >> - u32 dsiclk_sel; /* Mux configuration (see diagram) */ >> u32 ssc_en; /* SSC enable/disable */ >> - u32 ldo_en; >> >> /* fixed params */ >> - u32 refclk_dbler_en; >> - u32 vco_measure_time; >> - u32 kvco_measure_time; >> - u32 bandgap_timer; >> - u32 pll_wakeup_timer; >> u32 plllock_cnt; >> - u32 plllock_rng; >> u32 ssc_center; >> u32 ssc_adj_period; >> u32 ssc_spread; >> u32 ssc_freq; >> - u32 pll_ie_trim; >> - u32 pll_ip_trim; >> - u32 pll_iptat_trim; >> - u32 pll_cpcset_cur; >> - u32 pll_cpmset_cur; >> - >> - u32 pll_icpmset; >> - u32 pll_icpcset; >> - >> - u32 pll_icpmset_p; >> - u32 pll_icpmset_m; >> - >> - u32 pll_icpcset_p; >> - u32 pll_icpcset_m; >> - >> - u32 pll_lpf_res1; >> - u32 pll_lpf_cap1; >> - u32 pll_lpf_cap2; >> - u32 pll_c3ctrl; >> - u32 pll_r3ctrl; >> -}; >> >> -struct dsi_pll_output { >> - u32 pll_txclk_en; >> + /* calculated */ >> u32 dec_start; >> u32 div_frac_start; >> u32 ssc_period; >> @@ -91,19 +59,6 @@ struct dsi_pll_output { >> u32 pll_vco_count; >> u32 pll_kvco_div_ref; >> u32 pll_kvco_count; >> - u32 pll_misc1; >> - u32 pll_lpf2_postdiv; >> - u32 pll_resetsm_cntrl; >> - u32 pll_resetsm_cntrl2; >> - u32 pll_resetsm_cntrl5; >> - u32 pll_kvco_code; >> - >> - u32 cmn_clk_cfg0; >> - u32 cmn_clk_cfg1; >> - u32 cmn_ldo_cntrl; >> - >> - u32 pll_postdiv; >> - u32 fcvo; >> }; >> >> struct pll_14nm_cached_state { >> @@ -117,15 +72,9 @@ struct dsi_pll_14nm { >> >> struct msm_dsi_phy *phy; >> >> - struct dsi_pll_input in; >> - struct dsi_pll_output out; >> - >> /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ >> spinlock_t postdiv_lock; >> >> - u64 vco_current_rate; >> - u64 vco_ref_clk_rate; >> - >> struct pll_14nm_cached_state cached_state; >> >> struct dsi_pll_14nm *slave; >> @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct >> dsi_pll_14nm *pll_14nm, >> return pll_locked; >> } >> >> -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) >> +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) >> { >> - pll->in.fref = pll->vco_ref_clk_rate; >> - pll->in.fdata = 0; >> - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ >> - pll->in.ldo_en = 0; /* disabled for now */ >> - >> /* fixed input */ >> - pll->in.refclk_dbler_en = 0; >> - pll->in.vco_measure_time = 5; >> - pll->in.kvco_measure_time = 5; >> - pll->in.bandgap_timer = 4; >> - pll->in.pll_wakeup_timer = 5; >> - pll->in.plllock_cnt = 1; >> - pll->in.plllock_rng = 0; >> + pconf->plllock_cnt = 1; >> >> /* >> * SSC is enabled by default. We might need DT props for configuring >> * some SSC params like PPM and center/down spread etc. >> */ >> - pll->in.ssc_en = 1; >> - pll->in.ssc_center = 0; /* down spread by default */ >> - pll->in.ssc_spread = 5; /* PPM / 1000 */ >> - pll->in.ssc_freq = 31500; /* default recommended */ >> - pll->in.ssc_adj_period = 37; >> - >> - pll->in.pll_ie_trim = 4; >> - pll->in.pll_ip_trim = 4; >> - pll->in.pll_cpcset_cur = 1; >> - pll->in.pll_cpmset_cur = 1; >> - pll->in.pll_icpmset = 4; >> - pll->in.pll_icpcset = 4; >> - pll->in.pll_icpmset_p = 0; >> - pll->in.pll_icpmset_m = 0; >> - pll->in.pll_icpcset_p = 0; >> - pll->in.pll_icpcset_m = 0; >> - pll->in.pll_lpf_res1 = 3; >> - pll->in.pll_lpf_cap1 = 11; >> - pll->in.pll_lpf_cap2 = 1; >> - pll->in.pll_iptat_trim = 7; >> - pll->in.pll_c3ctrl = 2; >> - pll->in.pll_r3ctrl = 1; >> + pconf->ssc_en = 1; >> + pconf->ssc_center = 0; /* down spread by default */ >> + pconf->ssc_spread = 5; /* PPM / 1000 */ >> + pconf->ssc_freq = 31500; /* default recommended */ >> + pconf->ssc_adj_period = 37; >> } >> >> #define CEIL(x, y) (((x) + ((y) - 1)) / (y)) >> >> -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) >> +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct >> dsi_pll_config *pconf) >> { >> u32 period, ssc_period; >> u32 ref, rem; >> u64 step_size; >> >> - DBG("vco=%lld ref=%lld", pll->vco_current_rate, >> pll->vco_ref_clk_rate); >> + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE); >> >> - ssc_period = pll->in.ssc_freq / 500; >> - period = (u32)pll->vco_ref_clk_rate / 1000; >> + ssc_period = pconf->ssc_freq / 500; >> + period = (u32)VCO_REF_CLK_RATE / 1000; >> ssc_period = CEIL(period, ssc_period); >> ssc_period -= 1; >> - pll->out.ssc_period = ssc_period; >> + pconf->ssc_period = ssc_period; >> >> - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, >> - pll->in.ssc_spread, pll->out.ssc_period); >> + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq, >> + pconf->ssc_spread, pconf->ssc_period); >> >> - step_size = (u32)pll->vco_current_rate; >> - ref = pll->vco_ref_clk_rate; >> + step_size = (u32)pconf->vco_current_rate; >> + ref = VCO_REF_CLK_RATE; >> ref /= 1000; >> step_size = div_u64(step_size, ref); >> step_size <<= 20; >> step_size = div_u64(step_size, 1000); >> - step_size *= pll->in.ssc_spread; >> + step_size *= pconf->ssc_spread; >> step_size = div_u64(step_size, 1000); >> - step_size *= (pll->in.ssc_adj_period + 1); >> + step_size *= (pconf->ssc_adj_period + 1); >> >> rem = 0; >> step_size = div_u64_rem(step_size, ssc_period + 1, &rem); >> @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct >> dsi_pll_14nm *pll) >> >> step_size &= 0x0ffff; /* take lower 16 bits */ >> >> - pll->out.ssc_step_size = step_size; >> + pconf->ssc_step_size = step_size; >> } >> >> -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) >> +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct >> dsi_pll_config *pconf) >> { >> - struct dsi_pll_input *pin = &pll->in; >> - struct dsi_pll_output *pout = &pll->out; >> u64 multiplier = BIT(20); >> u64 dec_start_multiple, dec_start, pll_comp_val; >> u32 duration, div_frac_start; >> - u64 vco_clk_rate = pll->vco_current_rate; >> - u64 fref = pll->vco_ref_clk_rate; >> + u64 vco_clk_rate = pconf->vco_current_rate; >> + u64 fref = VCO_REF_CLK_RATE; >> >> DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); >> >> @@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct >> dsi_pll_14nm *pll) >> >> dec_start = div_u64(dec_start_multiple, multiplier); >> >> - pout->dec_start = (u32)dec_start; >> - pout->div_frac_start = div_frac_start; >> + pconf->dec_start = (u32)dec_start; >> + pconf->div_frac_start = div_frac_start; >> >> - if (pin->plllock_cnt == 0) >> + if (pconf->plllock_cnt == 0) >> duration = 1024; >> - else if (pin->plllock_cnt == 1) >> + else if (pconf->plllock_cnt == 1) >> duration = 256; >> - else if (pin->plllock_cnt == 2) >> + else if (pconf->plllock_cnt == 2) >> duration = 128; >> else >> duration = 32; >> @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct >> dsi_pll_14nm *pll) >> pll_comp_val = div_u64(pll_comp_val, multiplier); >> do_div(pll_comp_val, 10); >> >> - pout->plllock_cmp = (u32)pll_comp_val; >> - >> - pout->pll_txclk_en = 1; >> - pout->cmn_ldo_cntrl = 0x3c; >> + pconf->plllock_cmp = (u32)pll_comp_val; >> } >> >> static u32 pll_14nm_kvco_slop(u32 vrate) >> @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate) >> return slop; >> } >> >> -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) >> +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct >> dsi_pll_config *pconf) >> { >> - struct dsi_pll_input *pin = &pll->in; >> - struct dsi_pll_output *pout = &pll->out; >> - u64 vco_clk_rate = pll->vco_current_rate; >> - u64 fref = pll->vco_ref_clk_rate; >> + u64 vco_clk_rate = pconf->vco_current_rate; >> + u64 fref = VCO_REF_CLK_RATE; >> + u32 vco_measure_time = 5; >> + u32 kvco_measure_time = 5; >> u64 data; >> u32 cnt; >> >> - data = fref * pin->vco_measure_time; >> + data = fref * vco_measure_time; >> do_div(data, 1000000); >> data &= 0x03ff; /* 10 bits */ >> data -= 2; >> - pout->pll_vco_div_ref = data; >> + pconf->pll_vco_div_ref = data; >> >> data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ >> - data *= pin->vco_measure_time; >> + data *= vco_measure_time; >> do_div(data, 10); >> - pout->pll_vco_count = data; >> + pconf->pll_vco_count = data; >> >> - data = fref * pin->kvco_measure_time; >> + data = fref * kvco_measure_time; >> do_div(data, 1000000); >> data &= 0x03ff; /* 10 bits */ >> data -= 1; >> - pout->pll_kvco_div_ref = data; >> + pconf->pll_kvco_div_ref = data; >> >> cnt = pll_14nm_kvco_slop(vco_clk_rate); >> cnt *= 2; >> cnt /= 100; >> - cnt *= pin->kvco_measure_time; >> - pout->pll_kvco_count = cnt; >> - >> - pout->pll_misc1 = 16; >> - pout->pll_resetsm_cntrl = 48; >> - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; >> - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; >> - pout->pll_kvco_code = 0; >> + cnt *= kvco_measure_time; >> + pconf->pll_kvco_count = cnt; >> } >> >> -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) >> +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct >> dsi_pll_config *pconf) >> { >> void __iomem *base = pll->phy->pll_base; >> - struct dsi_pll_input *pin = &pll->in; >> - struct dsi_pll_output *pout = &pll->out; >> u8 data; >> >> - data = pin->ssc_adj_period; >> + data = pconf->ssc_adj_period; >> data &= 0x0ff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); >> - data = (pin->ssc_adj_period >> 8); >> + data = (pconf->ssc_adj_period >> 8); >> data &= 0x03; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); >> >> - data = pout->ssc_period; >> + data = pconf->ssc_period; >> data &= 0x0ff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); >> - data = (pout->ssc_period >> 8); >> + data = (pconf->ssc_period >> 8); >> data &= 0x0ff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); >> >> - data = pout->ssc_step_size; >> + data = pconf->ssc_step_size; >> data &= 0x0ff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); >> - data = (pout->ssc_step_size >> 8); >> + data = (pconf->ssc_step_size >> 8); >> data &= 0x0ff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); >> >> - data = (pin->ssc_center & 0x01); >> + data = (pconf->ssc_center & 0x01); >> data <<= 1; >> data |= 0x01; /* enable */ >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); >> @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm >> *pll) >> } >> >> static void pll_db_commit_common(struct dsi_pll_14nm *pll, >> - struct dsi_pll_input *pin, >> - struct dsi_pll_output *pout) >> + struct dsi_pll_config *pconf) >> { >> void __iomem *base = pll->phy->pll_base; >> u8 data; >> @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct >> dsi_pll_14nm *pll, >> data = 0; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); >> >> - data = pout->pll_txclk_en; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1); >> >> - data = pout->pll_resetsm_cntrl; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); >> - data = pout->pll_resetsm_cntrl2; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); >> - data = pout->pll_resetsm_cntrl5; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3); >> /* bandgap_timer */ >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /* >> pll_wakeup_timer */ >> >> - data = pout->pll_vco_div_ref & 0xff; >> + data = pconf->pll_vco_div_ref & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); >> - data = (pout->pll_vco_div_ref >> 8) & 0x3; >> + data = (pconf->pll_vco_div_ref >> 8) & 0x3; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); >> >> - data = pout->pll_kvco_div_ref & 0xff; >> + data = pconf->pll_kvco_div_ref & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); >> - data = (pout->pll_kvco_div_ref >> 8) & 0x3; >> + data = (pconf->pll_kvco_div_ref >> 8) & 0x3; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); >> >> - data = pout->pll_misc1; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16); >> >> - data = pin->pll_ie_trim; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4); >> >> - data = pin->pll_ip_trim; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4); >> >> - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1); >> >> - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0); >> >> - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0); >> >> - data = pin->pll_icpmset << 3 | pin->pll_icpcset; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4); >> >> - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11); >> >> - data = pin->pll_iptat_trim; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7); >> >> - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2); >> } >> >> static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) >> @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct >> dsi_pll_14nm *pll_14nm) >> } >> >> static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, >> - struct dsi_pll_input *pin, >> - struct dsi_pll_output *pout) >> + struct dsi_pll_config *pconf) >> { >> void __iomem *base = pll->phy->pll_base; >> void __iomem *cmn_base = pll->phy->base; >> @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct >> dsi_pll_14nm *pll, >> >> DBG("DSI%d PLL", pll->phy->id); >> >> - data = pout->cmn_ldo_cntrl; >> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); >> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c); >> >> - pll_db_commit_common(pll, pin, pout); >> + pll_db_commit_common(pll, pconf); >> >> pll_14nm_software_reset(pll); >> >> - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ >> - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); >> + /* Use the /2 path in Mux */ >> + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1); >> >> data = 0xff; /* data, clk, pll normal operation */ >> dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); >> >> /* configure the frequency dependent pll registers */ >> - data = pout->dec_start; >> + data = pconf->dec_start; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); >> >> - data = pout->div_frac_start & 0xff; >> + data = pconf->div_frac_start & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); >> - data = (pout->div_frac_start >> 8) & 0xff; >> + data = (pconf->div_frac_start >> 8) & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); >> - data = (pout->div_frac_start >> 16) & 0xf; >> + data = (pconf->div_frac_start >> 16) & 0xf; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); >> >> - data = pout->plllock_cmp & 0xff; >> + data = pconf->plllock_cmp & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); >> >> - data = (pout->plllock_cmp >> 8) & 0xff; >> + data = (pconf->plllock_cmp >> 8) & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); >> >> - data = (pout->plllock_cmp >> 16) & 0x3; >> + data = (pconf->plllock_cmp >> 16) & 0x3; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); >> >> - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; >> + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */ >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); >> >> - data = pout->pll_vco_count & 0xff; >> + data = pconf->pll_vco_count & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); >> - data = (pout->pll_vco_count >> 8) & 0xff; >> + data = (pconf->pll_vco_count >> 8) & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); >> >> - data = pout->pll_kvco_count & 0xff; >> + data = pconf->pll_kvco_count & 0xff; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); >> - data = (pout->pll_kvco_count >> 8) & 0x3; >> + data = (pconf->pll_kvco_count >> 8) & 0x3; >> dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); >> >> - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; >> - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); >> + /* >> + * High nibble configures the post divider internal to the VCO. It's >> + * fixed to divide by 1 for now. >> + * >> + * 0: divided by 1 >> + * 1: divided by 2 >> + * 2: divided by 4 >> + * 3: divided by 8 >> + */ >> + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << >> 4 | 3); >> >> - if (pin->ssc_en) >> - pll_db_commit_ssc(pll); >> + if (pconf->ssc_en) >> + pll_db_commit_ssc(pll, pconf); >> >> wmb(); /* make sure register committed */ >> } >> @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct >> clk_hw *hw, unsigned long rate, >> unsigned long parent_rate) >> { >> struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw); >> - struct dsi_pll_input *pin = &pll_14nm->in; >> - struct dsi_pll_output *pout = &pll_14nm->out; >> + struct dsi_pll_config conf; >> >> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate, >> parent_rate); >> >> - pll_14nm->vco_current_rate = rate; >> - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; >> - >> - dsi_pll_14nm_input_init(pll_14nm); >> - >> - /* >> - * This configures the post divider internal to the VCO. It's >> - * fixed to divide by 1 for now. >> - * >> - * tx_band = pll_postdiv. >> - * 0: divided by 1 >> - * 1: divided by 2 >> - * 2: divided by 4 >> - * 3: divided by 8 >> - */ >> - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; >> + dsi_pll_14nm_config_init(&conf); >> + conf.vco_current_rate = rate; >> >> - pll_14nm_dec_frac_calc(pll_14nm); >> + pll_14nm_dec_frac_calc(pll_14nm, &conf); >> >> - if (pin->ssc_en) >> - pll_14nm_ssc_calc(pll_14nm); >> + if (conf.ssc_en) >> + pll_14nm_ssc_calc(pll_14nm, &conf); >> >> - pll_14nm_calc_vco_count(pll_14nm); >> + pll_14nm_calc_vco_count(pll_14nm, &conf); >> >> /* commit the slave DSI PLL registers if we're master. Note that we >> * don't lock the slave PLL. We just ensure that the PLL/PHY >> registers >> @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct >> clk_hw *hw, unsigned long rate, >> if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { >> struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; >> >> - pll_db_commit_14nm(pll_14nm_slave, pin, pout); >> + pll_db_commit_14nm(pll_14nm_slave, &conf); >> } >> >> - pll_db_commit_14nm(pll_14nm, pin, pout); >> + pll_db_commit_14nm(pll_14nm, &conf); >> >> return 0; >> } >> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c >> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c >> index 4df237ad0eaf..ce6ae2fba993 100644 >> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c >> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c >> @@ -36,43 +36,24 @@ >> */ >> >> #define VCO_REF_CLK_RATE 19200000 >> - >> -struct dsi_pll_regs { >> - u32 pll_prop_gain_rate; >> - u32 pll_lockdet_rate; >> - u32 decimal_div_start; >> - u32 frac_div_start_low; >> - u32 frac_div_start_mid; >> - u32 frac_div_start_high; >> - u32 pll_clock_inverters; >> - u32 ssc_stepsize_low; >> - u32 ssc_stepsize_high; >> - u32 ssc_div_per_low; >> - u32 ssc_div_per_high; >> - u32 ssc_adjper_low; >> - u32 ssc_adjper_high; >> - u32 ssc_control; >> -}; >> +#define FRAC_BITS 18 >> >> /* Hardware is V4.1 */ >> #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0) >> >> struct dsi_pll_config { >> - u32 ref_freq; >> - bool div_override; >> - u32 output_div; >> - bool ignore_frac; >> - bool disable_prescaler; >> bool enable_ssc; >> bool ssc_center; >> - u32 dec_bits; >> - u32 frac_bits; >> - u32 lock_timer; >> u32 ssc_freq; >> u32 ssc_offset; >> u32 ssc_adj_per; >> - u32 thresh_cycles; >> - u32 refclk_cycles; >> + >> + /* out */ >> + u32 decimal_div_start; >> + u32 frac_div_start; >> + u32 pll_clock_inverters; >> + u32 ssc_stepsize; >> + u32 ssc_div_per; >> }; >> >> struct pll_7nm_cached_state { >> @@ -88,15 +69,11 @@ struct dsi_pll_7nm { >> >> struct msm_dsi_phy *phy; >> >> - u64 vco_ref_clk_rate; >> u64 vco_current_rate; >> >> /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ >> spinlock_t postdiv_lock; >> >> - struct dsi_pll_config pll_configuration; >> - struct dsi_pll_regs reg_setup; >> - >> struct pll_7nm_cached_state cached_state; >> >> struct dsi_pll_7nm *slave; >> @@ -110,35 +87,20 @@ struct dsi_pll_7nm { >> */ >> static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; >> >> -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) >> +static void dsi_pll_setup_config(struct dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - >> - config->ref_freq = pll->vco_ref_clk_rate; >> - config->output_div = 1; >> - config->dec_bits = 8; >> - config->frac_bits = 18; >> - config->lock_timer = 64; >> config->ssc_freq = 31500; >> config->ssc_offset = 4800; >> config->ssc_adj_per = 2; >> - config->thresh_cycles = 32; >> - config->refclk_cycles = 256; >> - >> - config->div_override = false; >> - config->ignore_frac = false; >> - config->disable_prescaler = false; >> >> /* TODO: ssc enable */ >> config->enable_ssc = false; >> config->ssc_center = 0; >> } >> >> -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) >> +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct >> dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> - u64 fref = pll->vco_ref_clk_rate; >> + u64 fref = VCO_REF_CLK_RATE; >> u64 pll_freq; >> u64 divider; >> u64 dec, dec_multiple; >> @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct >> dsi_pll_7nm *pll) >> >> pll_freq = pll->vco_current_rate; >> >> - if (config->disable_prescaler) >> - divider = fref; >> - else >> - divider = fref * 2; >> + divider = fref * 2; >> >> - multiplier = 1 << config->frac_bits; >> + multiplier = 1 << FRAC_BITS; >> dec_multiple = div_u64(pll_freq * multiplier, divider); >> div_u64_rem(dec_multiple, multiplier, &frac); >> >> dec = div_u64(dec_multiple, multiplier); >> >> if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)) >> - regs->pll_clock_inverters = 0x28; >> + config->pll_clock_inverters = 0x28; >> else if (pll_freq <= 1000000000ULL) >> - regs->pll_clock_inverters = 0xa0; >> + config->pll_clock_inverters = 0xa0; >> else if (pll_freq <= 2500000000ULL) >> - regs->pll_clock_inverters = 0x20; >> + config->pll_clock_inverters = 0x20; >> else if (pll_freq <= 3020000000ULL) >> - regs->pll_clock_inverters = 0x00; >> + config->pll_clock_inverters = 0x00; >> else >> - regs->pll_clock_inverters = 0x40; >> + config->pll_clock_inverters = 0x40; >> >> - regs->pll_lockdet_rate = config->lock_timer; >> - regs->decimal_div_start = dec; >> - regs->frac_div_start_low = (frac & 0xff); >> - regs->frac_div_start_mid = (frac & 0xff00) >> 8; >> - regs->frac_div_start_high = (frac & 0x30000) >> 16; >> + config->decimal_div_start = dec; >> + config->frac_div_start = frac; >> } >> >> #define SSC_CENTER BIT(0) >> #define SSC_EN BIT(1) >> >> -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) >> +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct >> dsi_pll_config *config) >> { >> - struct dsi_pll_config *config = &pll->pll_configuration; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> u32 ssc_per; >> u32 ssc_mod; >> u64 ssc_step_size; >> @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm >> *pll) >> return; >> } >> >> - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / >> 2 - 1; >> + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / >> 2 - 1; >> ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); >> ssc_per -= ssc_mod; >> >> - frac = regs->frac_div_start_low | >> - (regs->frac_div_start_mid << 8) | >> - (regs->frac_div_start_high << 16); >> - ssc_step_size = regs->decimal_div_start; >> - ssc_step_size *= (1 << config->frac_bits); >> + frac = config->frac_div_start; >> + ssc_step_size = config->decimal_div_start; >> + ssc_step_size *= (1 << FRAC_BITS); >> ssc_step_size += frac; >> ssc_step_size *= config->ssc_offset; >> ssc_step_size *= (config->ssc_adj_per + 1); >> ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); >> ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); >> >> - regs->ssc_div_per_low = ssc_per & 0xFF; >> - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; >> - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); >> - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); >> - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; >> - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; >> - >> - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; >> + config->ssc_div_per = ssc_per; >> + config->ssc_stepsize = ssc_step_size; >> >> pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", >> - regs->decimal_div_start, frac, config->frac_bits); >> + config->decimal_div_start, frac, FRAC_BITS); >> pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", >> ssc_per, (u32)ssc_step_size, config->ssc_adj_per); >> } >> >> -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) >> +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct >> dsi_pll_config *config) >> { >> void __iomem *base = pll->phy->pll_base; >> - struct dsi_pll_regs *regs = &pll->reg_setup; >> >> - if (pll->pll_configuration.enable_ssc) { >> + if (config->enable_ssc) { >> pr_debug("SSC is enabled\n"); >> >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, >> - regs->ssc_stepsize_low); >> + config->ssc_stepsize & 0xff); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, >> - regs->ssc_stepsize_high); >> + config->ssc_stepsize >> 8); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, >> - regs->ssc_div_per_low); >> + config->ssc_div_per & 0xff); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, >> - regs->ssc_div_per_high); >> + config->ssc_div_per >> 8); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, >> - regs->ssc_adjper_low); >> + config->ssc_adj_per & 0xff); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, >> - regs->ssc_adjper_high); >> + config->ssc_adj_per >> 8); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, >> - SSC_EN | regs->ssc_control); >> + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); >> } >> } >> >> @@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct >> dsi_pll_7nm *pll) >> } >> } >> >> -static void dsi_pll_commit(struct dsi_pll_7nm *pll) >> +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct >> dsi_pll_config *config) >> { >> void __iomem *base = pll->phy->pll_base; >> - struct dsi_pll_regs *reg = &pll->reg_setup; >> >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, >> reg->decimal_div_start); >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, >> reg->frac_div_start_low); >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, >> reg->frac_div_start_mid); >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, >> reg->frac_div_start_high); >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, >> reg->pll_lockdet_rate); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, >> config->decimal_div_start); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, >> + config->frac_div_start & 0xff); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, >> + (config->frac_div_start & 0xff00) >> 8); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, >> + (config->frac_div_start & 0x30000) >> 16); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); >> dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: >> 0x00 for CPHY */ >> - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, >> reg->pll_clock_inverters); >> + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, >> config->pll_clock_inverters); >> } >> >> static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long >> rate, >> unsigned long parent_rate) >> { >> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); >> + struct dsi_pll_config config; >> >> DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate, >> parent_rate); >> >> pll_7nm->vco_current_rate = rate; >> - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; >> >> - dsi_pll_setup_config(pll_7nm); >> + dsi_pll_setup_config(&config); >> >> - dsi_pll_calc_dec_frac(pll_7nm); >> + dsi_pll_calc_dec_frac(pll_7nm, &config); >> >> - dsi_pll_calc_ssc(pll_7nm); >> + dsi_pll_calc_ssc(pll_7nm, &config); >> >> - dsi_pll_commit(pll_7nm); >> + dsi_pll_commit(pll_7nm, &config); >> >> dsi_pll_config_hzindep_reg(pll_7nm); >> >> - dsi_pll_ssc_commit(pll_7nm); >> + dsi_pll_ssc_commit(pll_7nm, &config); >> >> /* flush, ensure all register writes are done*/ >> wmb(); >> @@ -486,9 +433,8 @@ static unsigned long >> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, >> unsigned long parent_rate) >> { >> struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); >> - struct dsi_pll_config *config = &pll_7nm->pll_configuration; >> void __iomem *base = pll_7nm->phy->pll_base; >> - u64 ref_clk = pll_7nm->vco_ref_clk_rate; >> + u64 ref_clk = VCO_REF_CLK_RATE; >> u64 vco_rate = 0x0; >> u64 multiplier; >> u32 frac; >> @@ -508,7 +454,7 @@ static unsigned long >> dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, >> * TODO: >> * 1. Assumes prescaler is disabled >> */ >> - multiplier = 1 << config->frac_bits; >> + multiplier = 1 << FRAC_BITS; >> pll_freq = dec * (ref_clk * 2); >> tmp64 = (ref_clk * 2 * frac); >> pll_freq += div_u64(tmp64, multiplier); >> @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct >> msm_dsi_phy *phy) >> val |= cached->pll_mux; >> dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); >> >> - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, >> pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); >> + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, >> pll_7nm->vco_current_rate, VCO_REF_CLK_RATE); >> if (ret) { >> DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev, >> "restore vco rate failed. ret=%d\n", ret);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index b937e77b3c37..1fbb54f4df98 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -36,43 +36,25 @@ */ #define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18 /* v3.0.0 10nm implementation that requires the old timings settings */ #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0) struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 pll_prop_gain_rate; + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; }; struct pll_10nm_cached_state { @@ -88,15 +70,11 @@ struct dsi_pll_10nm { struct msm_dsi_phy *phy; - u64 vco_ref_clk_rate; u64 vco_current_rate; /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_10nm_cached_state cached_state; struct dsi_pll_10nm *slave; @@ -110,34 +88,19 @@ struct dsi_pll_10nm { */ static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 5000; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; config->enable_ssc = false; - config->ssc_center = 0; + config->ssc_center = false; } -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) pll_freq = pll->vco_current_rate; - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2; - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); dec = div_u64_rem(dec_multiple, multiplier, &frac); if (pll_freq <= 1900000000UL) - regs->pll_prop_gain_rate = 8; + config->pll_prop_gain_rate = 8; else if (pll_freq <= 3000000000UL) - regs->pll_prop_gain_rate = 10; + config->pll_prop_gain_rate = 10; else - regs->pll_prop_gain_rate = 12; + config->pll_prop_gain_rate = 12; if (pll_freq < 1100000000UL) - regs->pll_clock_inverters = 8; + config->pll_clock_inverters = 8; else - regs->pll_clock_inverters = 0; + config->pll_clock_inverters = 0; - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; } #define SSC_CENTER BIT(0) #define SSC_EN BIT(1) -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) return; } - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod; - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size; pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); } -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup; - if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n"); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } } @@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); } -static void dsi_pll_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup; dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, - reg->decimal_div_start); + config->decimal_div_start); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, - reg->frac_div_start_low); + config->frac_div_start & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, - reg->frac_div_start_mid); + (config->frac_div_start & 0xff00) >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, - reg->frac_div_start_high); - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, - reg->pll_lockdet_rate); + (config->frac_div_start & 0x30000) >> 16); + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, - reg->pll_clock_inverters); + config->pll_clock_inverters); } static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); + struct dsi_pll_config config; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate, parent_rate); pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - dsi_pll_setup_config(pll_10nm); + dsi_pll_setup_config(&config); - dsi_pll_calc_dec_frac(pll_10nm); + dsi_pll_calc_dec_frac(pll_10nm, &config); - dsi_pll_calc_ssc(pll_10nm); + dsi_pll_calc_ssc(pll_10nm, &config); - dsi_pll_commit(pll_10nm); + dsi_pll_commit(pll_10nm, &config); dsi_pll_config_hzindep_reg(pll_10nm); - dsi_pll_ssc_commit(pll_10nm); + dsi_pll_ssc_commit(pll_10nm, &config); /* flush, ensure all register writes are done*/ wmb(); @@ -461,9 +405,8 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); - struct dsi_pll_config *config = &pll_10nm->pll_configuration; void __iomem *base = pll_10nm->phy->pll_base; - u64 ref_clk = pll_10nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -483,7 +426,7 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, * TODO: * 1. Assumes prescaler is disabled */ - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); - ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 8b4865c5796d..d08ad0c632b4 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -37,51 +37,19 @@ #define VCO_MIN_RATE 1300000000UL #define VCO_MAX_RATE 2600000000UL -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 +struct dsi_pll_config { + u64 vco_current_rate; -struct dsi_pll_input { - u32 fref; /* reference clk */ - u32 fdata; /* bit clock rate */ - u32 dsiclk_sel; /* Mux configuration (see diagram) */ u32 ssc_en; /* SSC enable/disable */ - u32 ldo_en; /* fixed params */ - u32 refclk_dbler_en; - u32 vco_measure_time; - u32 kvco_measure_time; - u32 bandgap_timer; - u32 pll_wakeup_timer; u32 plllock_cnt; - u32 plllock_rng; u32 ssc_center; u32 ssc_adj_period; u32 ssc_spread; u32 ssc_freq; - u32 pll_ie_trim; - u32 pll_ip_trim; - u32 pll_iptat_trim; - u32 pll_cpcset_cur; - u32 pll_cpmset_cur; - - u32 pll_icpmset; - u32 pll_icpcset; - - u32 pll_icpmset_p; - u32 pll_icpmset_m; - - u32 pll_icpcset_p; - u32 pll_icpcset_m; - - u32 pll_lpf_res1; - u32 pll_lpf_cap1; - u32 pll_lpf_cap2; - u32 pll_c3ctrl; - u32 pll_r3ctrl; -}; -struct dsi_pll_output { - u32 pll_txclk_en; + /* calculated */ u32 dec_start; u32 div_frac_start; u32 ssc_period; @@ -91,19 +59,6 @@ struct dsi_pll_output { u32 pll_vco_count; u32 pll_kvco_div_ref; u32 pll_kvco_count; - u32 pll_misc1; - u32 pll_lpf2_postdiv; - u32 pll_resetsm_cntrl; - u32 pll_resetsm_cntrl2; - u32 pll_resetsm_cntrl5; - u32 pll_kvco_code; - - u32 cmn_clk_cfg0; - u32 cmn_clk_cfg1; - u32 cmn_ldo_cntrl; - - u32 pll_postdiv; - u32 fcvo; }; struct pll_14nm_cached_state { @@ -117,15 +72,9 @@ struct dsi_pll_14nm { struct msm_dsi_phy *phy; - struct dsi_pll_input in; - struct dsi_pll_output out; - /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - u64 vco_current_rate; - u64 vco_ref_clk_rate; - struct pll_14nm_cached_state cached_state; struct dsi_pll_14nm *slave; @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, return pll_locked; } -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) { - pll->in.fref = pll->vco_ref_clk_rate; - pll->in.fdata = 0; - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ - pll->in.ldo_en = 0; /* disabled for now */ - /* fixed input */ - pll->in.refclk_dbler_en = 0; - pll->in.vco_measure_time = 5; - pll->in.kvco_measure_time = 5; - pll->in.bandgap_timer = 4; - pll->in.pll_wakeup_timer = 5; - pll->in.plllock_cnt = 1; - pll->in.plllock_rng = 0; + pconf->plllock_cnt = 1; /* * SSC is enabled by default. We might need DT props for configuring * some SSC params like PPM and center/down spread etc. */ - pll->in.ssc_en = 1; - pll->in.ssc_center = 0; /* down spread by default */ - pll->in.ssc_spread = 5; /* PPM / 1000 */ - pll->in.ssc_freq = 31500; /* default recommended */ - pll->in.ssc_adj_period = 37; - - pll->in.pll_ie_trim = 4; - pll->in.pll_ip_trim = 4; - pll->in.pll_cpcset_cur = 1; - pll->in.pll_cpmset_cur = 1; - pll->in.pll_icpmset = 4; - pll->in.pll_icpcset = 4; - pll->in.pll_icpmset_p = 0; - pll->in.pll_icpmset_m = 0; - pll->in.pll_icpcset_p = 0; - pll->in.pll_icpcset_m = 0; - pll->in.pll_lpf_res1 = 3; - pll->in.pll_lpf_cap1 = 11; - pll->in.pll_lpf_cap2 = 1; - pll->in.pll_iptat_trim = 7; - pll->in.pll_c3ctrl = 2; - pll->in.pll_r3ctrl = 1; + pconf->ssc_en = 1; + pconf->ssc_center = 0; /* down spread by default */ + pconf->ssc_spread = 5; /* PPM / 1000 */ + pconf->ssc_freq = 31500; /* default recommended */ + pconf->ssc_adj_period = 37; } #define CEIL(x, y) (((x) + ((y) - 1)) / (y)) -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { u32 period, ssc_period; u32 ref, rem; u64 step_size; - DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE); - ssc_period = pll->in.ssc_freq / 500; - period = (u32)pll->vco_ref_clk_rate / 1000; + ssc_period = pconf->ssc_freq / 500; + period = (u32)VCO_REF_CLK_RATE / 1000; ssc_period = CEIL(period, ssc_period); ssc_period -= 1; - pll->out.ssc_period = ssc_period; + pconf->ssc_period = ssc_period; - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, - pll->in.ssc_spread, pll->out.ssc_period); + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq, + pconf->ssc_spread, pconf->ssc_period); - step_size = (u32)pll->vco_current_rate; - ref = pll->vco_ref_clk_rate; + step_size = (u32)pconf->vco_current_rate; + ref = VCO_REF_CLK_RATE; ref /= 1000; step_size = div_u64(step_size, ref); step_size <<= 20; step_size = div_u64(step_size, 1000); - step_size *= pll->in.ssc_spread; + step_size *= pconf->ssc_spread; step_size = div_u64(step_size, 1000); - step_size *= (pll->in.ssc_adj_period + 1); + step_size *= (pconf->ssc_adj_period + 1); rem = 0; step_size = div_u64_rem(step_size, ssc_period + 1, &rem); @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) step_size &= 0x0ffff; /* take lower 16 bits */ - pll->out.ssc_step_size = step_size; + pconf->ssc_step_size = step_size; } -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u64 multiplier = BIT(20); u64 dec_start_multiple, dec_start, pll_comp_val; u32 duration, div_frac_start; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE; DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); @@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) dec_start = div_u64(dec_start_multiple, multiplier); - pout->dec_start = (u32)dec_start; - pout->div_frac_start = div_frac_start; + pconf->dec_start = (u32)dec_start; + pconf->div_frac_start = div_frac_start; - if (pin->plllock_cnt == 0) + if (pconf->plllock_cnt == 0) duration = 1024; - else if (pin->plllock_cnt == 1) + else if (pconf->plllock_cnt == 1) duration = 256; - else if (pin->plllock_cnt == 2) + else if (pconf->plllock_cnt == 2) duration = 128; else duration = 32; @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) pll_comp_val = div_u64(pll_comp_val, multiplier); do_div(pll_comp_val, 10); - pout->plllock_cmp = (u32)pll_comp_val; - - pout->pll_txclk_en = 1; - pout->cmn_ldo_cntrl = 0x3c; + pconf->plllock_cmp = (u32)pll_comp_val; } static u32 pll_14nm_kvco_slop(u32 vrate) @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate) return slop; } -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE; + u32 vco_measure_time = 5; + u32 kvco_measure_time = 5; u64 data; u32 cnt; - data = fref * pin->vco_measure_time; + data = fref * vco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 2; - pout->pll_vco_div_ref = data; + pconf->pll_vco_div_ref = data; data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ - data *= pin->vco_measure_time; + data *= vco_measure_time; do_div(data, 10); - pout->pll_vco_count = data; + pconf->pll_vco_count = data; - data = fref * pin->kvco_measure_time; + data = fref * kvco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 1; - pout->pll_kvco_div_ref = data; + pconf->pll_kvco_div_ref = data; cnt = pll_14nm_kvco_slop(vco_clk_rate); cnt *= 2; cnt /= 100; - cnt *= pin->kvco_measure_time; - pout->pll_kvco_count = cnt; - - pout->pll_misc1 = 16; - pout->pll_resetsm_cntrl = 48; - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; - pout->pll_kvco_code = 0; + cnt *= kvco_measure_time; + pconf->pll_kvco_count = cnt; } -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u8 data; - data = pin->ssc_adj_period; + data = pconf->ssc_adj_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); - data = (pin->ssc_adj_period >> 8); + data = (pconf->ssc_adj_period >> 8); data &= 0x03; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); - data = pout->ssc_period; + data = pconf->ssc_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); - data = (pout->ssc_period >> 8); + data = (pconf->ssc_period >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); - data = pout->ssc_step_size; + data = pconf->ssc_step_size; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); - data = (pout->ssc_step_size >> 8); + data = (pconf->ssc_step_size >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); - data = (pin->ssc_center & 0x01); + data = (pconf->ssc_center & 0x01); data <<= 1; data |= 0x01; /* enable */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) } static void pll_db_commit_common(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; u8 data; @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct dsi_pll_14nm *pll, data = 0; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); - data = pout->pll_txclk_en; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1); - data = pout->pll_resetsm_cntrl; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); - data = pout->pll_resetsm_cntrl2; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); - data = pout->pll_resetsm_cntrl5; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3); /* bandgap_timer */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /* pll_wakeup_timer */ - data = pout->pll_vco_div_ref & 0xff; + data = pconf->pll_vco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); - data = (pout->pll_vco_div_ref >> 8) & 0x3; + data = (pconf->pll_vco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); - data = pout->pll_kvco_div_ref & 0xff; + data = pconf->pll_kvco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); - data = (pout->pll_kvco_div_ref >> 8) & 0x3; + data = (pconf->pll_kvco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); - data = pout->pll_misc1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16); - data = pin->pll_ie_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4); - data = pin->pll_ip_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4); - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1); - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0); - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0); - data = pin->pll_icpmset << 3 | pin->pll_icpcset; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4); - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11); - data = pin->pll_iptat_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7); - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2); } static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) } static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; void __iomem *cmn_base = pll->phy->base; @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, DBG("DSI%d PLL", pll->phy->id); - data = pout->cmn_ldo_cntrl; - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c); - pll_db_commit_common(pll, pin, pout); + pll_db_commit_common(pll, pconf); pll_14nm_software_reset(pll); - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); + /* Use the /2 path in Mux */ + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1); data = 0xff; /* data, clk, pll normal operation */ dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); /* configure the frequency dependent pll registers */ - data = pout->dec_start; + data = pconf->dec_start; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); - data = pout->div_frac_start & 0xff; + data = pconf->div_frac_start & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); - data = (pout->div_frac_start >> 8) & 0xff; + data = (pconf->div_frac_start >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); - data = (pout->div_frac_start >> 16) & 0xf; + data = (pconf->div_frac_start >> 16) & 0xf; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); - data = pout->plllock_cmp & 0xff; + data = pconf->plllock_cmp & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); - data = (pout->plllock_cmp >> 8) & 0xff; + data = (pconf->plllock_cmp >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); - data = (pout->plllock_cmp >> 16) & 0x3; + data = (pconf->plllock_cmp >> 16) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); - data = pout->pll_vco_count & 0xff; + data = pconf->pll_vco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); - data = (pout->pll_vco_count >> 8) & 0xff; + data = (pconf->pll_vco_count >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); - data = pout->pll_kvco_count & 0xff; + data = pconf->pll_kvco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); - data = (pout->pll_kvco_count >> 8) & 0x3; + data = (pconf->pll_kvco_count >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); + /* + * High nibble configures the post divider internal to the VCO. It's + * fixed to divide by 1 for now. + * + * 0: divided by 1 + * 1: divided by 2 + * 2: divided by 4 + * 3: divided by 8 + */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << 4 | 3); - if (pin->ssc_en) - pll_db_commit_ssc(pll); + if (pconf->ssc_en) + pll_db_commit_ssc(pll, pconf); wmb(); /* make sure register committed */ } @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw); - struct dsi_pll_input *pin = &pll_14nm->in; - struct dsi_pll_output *pout = &pll_14nm->out; + struct dsi_pll_config conf; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate, parent_rate); - pll_14nm->vco_current_rate = rate; - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_14nm_input_init(pll_14nm); - - /* - * This configures the post divider internal to the VCO. It's - * fixed to divide by 1 for now. - * - * tx_band = pll_postdiv. - * 0: divided by 1 - * 1: divided by 2 - * 2: divided by 4 - * 3: divided by 8 - */ - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; + dsi_pll_14nm_config_init(&conf); + conf.vco_current_rate = rate; - pll_14nm_dec_frac_calc(pll_14nm); + pll_14nm_dec_frac_calc(pll_14nm, &conf); - if (pin->ssc_en) - pll_14nm_ssc_calc(pll_14nm); + if (conf.ssc_en) + pll_14nm_ssc_calc(pll_14nm, &conf); - pll_14nm_calc_vco_count(pll_14nm); + pll_14nm_calc_vco_count(pll_14nm, &conf); /* commit the slave DSI PLL registers if we're master. Note that we * don't lock the slave PLL. We just ensure that the PLL/PHY registers @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; - pll_db_commit_14nm(pll_14nm_slave, pin, pout); + pll_db_commit_14nm(pll_14nm_slave, &conf); } - pll_db_commit_14nm(pll_14nm, pin, pout); + pll_db_commit_14nm(pll_14nm, &conf); return 0; } diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index 4df237ad0eaf..ce6ae2fba993 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -36,43 +36,24 @@ */ #define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18 /* Hardware is V4.1 */ #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0) struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; }; struct pll_7nm_cached_state { @@ -88,15 +69,11 @@ struct dsi_pll_7nm { struct msm_dsi_phy *phy; - u64 vco_ref_clk_rate; u64 vco_current_rate; /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_7nm_cached_state cached_state; struct dsi_pll_7nm *slave; @@ -110,35 +87,20 @@ struct dsi_pll_7nm { */ static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 4800; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; /* TODO: ssc enable */ config->enable_ssc = false; config->ssc_center = 0; } -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) pll_freq = pll->vco_current_rate; - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2; - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); div_u64_rem(dec_multiple, multiplier, &frac); dec = div_u64(dec_multiple, multiplier); if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)) - regs->pll_clock_inverters = 0x28; + config->pll_clock_inverters = 0x28; else if (pll_freq <= 1000000000ULL) - regs->pll_clock_inverters = 0xa0; + config->pll_clock_inverters = 0xa0; else if (pll_freq <= 2500000000ULL) - regs->pll_clock_inverters = 0x20; + config->pll_clock_inverters = 0x20; else if (pll_freq <= 3020000000ULL) - regs->pll_clock_inverters = 0x00; + config->pll_clock_inverters = 0x00; else - regs->pll_clock_inverters = 0x40; + config->pll_clock_inverters = 0x40; - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; } #define SSC_CENTER BIT(0) #define SSC_EN BIT(1) -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) return; } - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod; - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size; pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); } -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup; - if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n"); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } } @@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) } } -static void dsi_pll_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup; dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, config->decimal_div_start); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, + config->frac_div_start & 0xff); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, + (config->frac_div_start & 0xff00) >> 8); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, + (config->frac_div_start & 0x30000) >> 16); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, config->pll_clock_inverters); } static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); + struct dsi_pll_config config; DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate, parent_rate); pll_7nm->vco_current_rate = rate; - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - dsi_pll_setup_config(pll_7nm); + dsi_pll_setup_config(&config); - dsi_pll_calc_dec_frac(pll_7nm); + dsi_pll_calc_dec_frac(pll_7nm, &config); - dsi_pll_calc_ssc(pll_7nm); + dsi_pll_calc_ssc(pll_7nm, &config); - dsi_pll_commit(pll_7nm); + dsi_pll_commit(pll_7nm, &config); dsi_pll_config_hzindep_reg(pll_7nm); - dsi_pll_ssc_commit(pll_7nm); + dsi_pll_ssc_commit(pll_7nm, &config); /* flush, ensure all register writes are done*/ wmb(); @@ -486,9 +433,8 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); - struct dsi_pll_config *config = &pll_7nm->pll_configuration; void __iomem *base = pll_7nm->phy->pll_base; - u64 ref_clk = pll_7nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -508,7 +454,7 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, * TODO: * 1. Assumes prescaler is disabled */ - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); - ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret);
The 7nm, 10nm and 14nm drivers would store interim data used during VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data structures to the onstack storage. While we are at it, drop unused/static 'config' data, unused config fields, etc. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++-------------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------ 3 files changed, 220 insertions(+), 447 deletions(-)