diff mbox

[v4,0/3] add support for the lmk04832

Message ID 20210407005330.2890430-1-liambeguin@gmail.com (mailing list archive)
State Under Review
Headers show

Commit Message

Liam Beguin April 7, 2021, 12:53 a.m. UTC
From: Liam Beguin <lvb@xiphos.com>


The LMK04832 is an ultra-high performance clock conditioner with JEDEC
JESD204B support and is also pin compatible with the LMK0482x family of

This driver adds initial support to configure the LMK04832 clocks using
the clock framework.

This has been tested on a system using JESD204B subclass 1.

At the moment, the VCO rate has to be set manually from the devicetree
and a dclk (or sclk) rate change isn't propagated to the VCO

Changes since v1:
- add yaml devicetree documentation,
- add links to datasheet,
- use {u8,u16,u32} instead of Uint_ variants,
- drop redundant debugfs code,
- use a pointer to device_info instead of struct copy,
- add of_device_id table,
- add support for SYSREF digital delay and JESD204B subclass 1

Changes since v2:
- fix dt-bindings documentation, apologies for the broken build
- fix property vendor prefixes
- split dt-bindings into a separate patch

Changes since v3:
- add missing properties in dt-bindings

Thanks for your time,

Liam Beguin (3):
  clk: add support for the lmk04832
  clk: lmk04832: add support for digital delay
  dt-bindings: clock: add ti,lmk04832 bindings

 .../bindings/clock/ti,lmk04832.yaml           |  209 +++
 drivers/clk/Kconfig                           |    7 +
 drivers/clk/Makefile                          |    1 +
 drivers/clk/clk-lmk04832.c                    | 1595 +++++++++++++++++
 4 files changed, 1812 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
 create mode 100644 drivers/clk/clk-lmk04832.c

Interdiff against v3:

base-commit: f40ddce88593482919761f74910f42f4b84c004b
diff mbox


diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
index c0d9ab650e80..a9f8b9b720fc 100644
--- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -23,9 +23,20 @@  properties:
     maxItems: 1
+  '#address-cells':
+    const: 1
+  '#size-cells':
+    const: 0
     const: 1
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum SPI clocking speed of the device in Hz.
       - description: PLL2 reference clock.