| Message ID | 20210428122711.2136467-2-daire.mcnamara@microchip.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | CLK: microchip: Add clkcfg driver for Microchip PolarFire SoC | expand |
On Wed, Apr 28, 2021 at 01:27:10PM +0100, daire.mcnamara@microchip.com wrote: > From: Daire McNamara <daire.mcnamara@microchip.com> > > Add device tree bindings for the Microchip PolarFire system > clock controller > > Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> > --- > .../bindings/clock/microchip,mpfs.yaml | 73 +++++++++++++++++++ > .../dt-bindings/clock/microchip,mpfs-clock.h | 45 ++++++++++++ > 2 files changed, 118 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/microchip,mpfs.yaml > create mode 100644 include/dt-bindings/clock/microchip,mpfs-clock.h > > diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml > new file mode 100644 > index 000000000000..a4756480a8ec > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip PolarFire Clock Control Module Binding > + > +maintainers: > + - Daire McNamara <daire.mcnamara@microchip.com> > + > +description: | > + Microchip PolarFire clock control (CLKCFG) is an integrated clock controller, > + which gates and enables all peripheral clocks. > + > + This device tree binding describes 32 gate clocks. Clocks are referenced by > + user nodes by the CLKCFG node phandle and the clock index in the group, from > + 0 to 31. > + > +properties: > + compatible: > + const: microchip,mpfs-clkcfg > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + '#clock-cells': > + const: 1 > + description: | > + The clock consumer should specify the desired clock by having the clock > + ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h > + for the full list of PolarFire clock IDs. > + > + clock-output-names: > + maxItems: 32 > + > +required: > + - compatible > + - reg > + - clocks > + - '#clock-cells' > + - clock-output-names > + > +additionalProperties: false > + > +examples: > + # Clock Config node: > + - | > + #include <dt-bindings/clock/microchip,mpfs-clock.h> > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + ref: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; This belongs at the top level. Or just omit it. > + clkcfg: clock-controller@20002000 { > + compatible = "microchip,mpfs-clkcfg"; > + reg = <0x0 0x20002000 0x0 0x1000>; > + clocks = <&ref>; > + #clock-cells = <1>; > + clock-output-names = "cpu", "axi", "ahb", "envm", "mac0", "mac1", "mmc", "timer", > + "mmuart0", "mmuart1", "mmuart2", "mmuart3", "mmuart4", > + "spi0", "spi1", "i2c0", "i2c1", "can0", "can1", "usb", "rtc", > + "qspi", "gpio0", "gpio1", "gpio2", "ddrc", > + "fic0", "fic1", "fic2", "fic3", "athena", "cfm"; > + }; > + }; > diff --git a/include/dt-bindings/clock/microchip,mpfs-clock.h b/include/dt-bindings/clock/microchip,mpfs-clock.h > new file mode 100644 > index 000000000000..d217b039a873 > --- /dev/null > +++ b/include/dt-bindings/clock/microchip,mpfs-clock.h > @@ -0,0 +1,45 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ Dual license please. > +/* > + * Daire McNamara,<daire.mcnamara@microchip.com> > + * Copyright (C) 2020 Microchip Technology Inc. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ > +#define _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ > + > +#define CLK_CPU 0 > +#define CLK_AXI 1 > +#define CLK_AHB 2 > + > +#define CLK_ENVM 3 > +#define CLK_MAC0 4 > +#define CLK_MAC1 5 > +#define CLK_MMC 6 > +#define CLK_TIMER 7 > +#define CLK_MMUART0 8 > +#define CLK_MMUART1 9 > +#define CLK_MMUART2 10 > +#define CLK_MMUART3 11 > +#define CLK_MMUART4 12 > +#define CLK_SPI0 13 > +#define CLK_SPI1 14 > +#define CLK_I2C0 15 > +#define CLK_I2C1 16 > +#define CLK_CAN0 17 > +#define CLK_CAN1 18 > +#define CLK_USB 19 > +#define CLK_RESERVED 20 > +#define CLK_RTC 21 > +#define CLK_QSPI 22 > +#define CLK_GPIO0 23 > +#define CLK_GPIO1 24 > +#define CLK_GPIO2 25 > +#define CLK_DDRC 26 > +#define CLK_FIC0 27 > +#define CLK_FIC1 28 > +#define CLK_FIC2 29 > +#define CLK_FIC3 30 > +#define CLK_ATHENA 31 > +#define CLK_CFM 32 I thought it was 0-31 clocks? > + > +#endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */ > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml new file mode 100644 index 000000000000..a4756480a8ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire Clock Control Module Binding + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + +description: | + Microchip PolarFire clock control (CLKCFG) is an integrated clock controller, + which gates and enables all peripheral clocks. + + This device tree binding describes 32 gate clocks. Clocks are referenced by + user nodes by the CLKCFG node phandle and the clock index in the group, from + 0 to 31. + +properties: + compatible: + const: microchip,mpfs-clkcfg + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h + for the full list of PolarFire clock IDs. + + clock-output-names: + maxItems: 32 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false + +examples: + # Clock Config node: + - | + #include <dt-bindings/clock/microchip,mpfs-clock.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + ref: refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "msspllclk"; + }; + clkcfg: clock-controller@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>; + clocks = <&ref>; + #clock-cells = <1>; + clock-output-names = "cpu", "axi", "ahb", "envm", "mac0", "mac1", "mmc", "timer", + "mmuart0", "mmuart1", "mmuart2", "mmuart3", "mmuart4", + "spi0", "spi1", "i2c0", "i2c1", "can0", "can1", "usb", "rtc", + "qspi", "gpio0", "gpio1", "gpio2", "ddrc", + "fic0", "fic1", "fic2", "fic3", "athena", "cfm"; + }; + }; diff --git a/include/dt-bindings/clock/microchip,mpfs-clock.h b/include/dt-bindings/clock/microchip,mpfs-clock.h new file mode 100644 index 000000000000..d217b039a873 --- /dev/null +++ b/include/dt-bindings/clock/microchip,mpfs-clock.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Daire McNamara,<daire.mcnamara@microchip.com> + * Copyright (C) 2020 Microchip Technology Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ +#define _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ + +#define CLK_CPU 0 +#define CLK_AXI 1 +#define CLK_AHB 2 + +#define CLK_ENVM 3 +#define CLK_MAC0 4 +#define CLK_MAC1 5 +#define CLK_MMC 6 +#define CLK_TIMER 7 +#define CLK_MMUART0 8 +#define CLK_MMUART1 9 +#define CLK_MMUART2 10 +#define CLK_MMUART3 11 +#define CLK_MMUART4 12 +#define CLK_SPI0 13 +#define CLK_SPI1 14 +#define CLK_I2C0 15 +#define CLK_I2C1 16 +#define CLK_CAN0 17 +#define CLK_CAN1 18 +#define CLK_USB 19 +#define CLK_RESERVED 20 +#define CLK_RTC 21 +#define CLK_QSPI 22 +#define CLK_GPIO0 23 +#define CLK_GPIO1 24 +#define CLK_GPIO2 25 +#define CLK_DDRC 26 +#define CLK_FIC0 27 +#define CLK_FIC1 28 +#define CLK_FIC2 29 +#define CLK_FIC3 30 +#define CLK_ATHENA 31 +#define CLK_CFM 32 + +#endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */