diff mbox series

[1/7] mips: ar7: convert to clkdev_lookup

Message ID 20210531173429.2467403-2-arnd@kernel.org (mailing list archive)
State Superseded, archived
Headers show
Series clk: clean up legacy clock interfaces | expand

Commit Message

Arnd Bergmann May 31, 2021, 5:34 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

ar7 is one of only two platforms that provide the clock interface but
implement a custom version of the clkdev_lookup code.

Change this to use the generic version instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/mips/Kconfig     |  1 +
 arch/mips/ar7/clock.c | 32 ++++++++++++--------------------
 2 files changed, 13 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ed51970c08e7..1cc03a7652a9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -215,6 +215,7 @@  config AR7
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select GPIOLIB
 	select VLYNQ
+	select CLKDEV_LOOKUP
 	select HAVE_LEGACY_CLK
 	help
 	  Support for the Texas Instruments AR7 System-on-a-Chip
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index 95def949c971..c614f254f370 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -5,6 +5,7 @@ 
  * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  */
 
+#include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
@@ -14,6 +15,7 @@ 
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -424,27 +426,15 @@  unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "bus"))
-		return &bus_clk;
+static struct clk_lookup ar7_clkdev_table[] = {
+	CLKDEV_INIT(NULL, "bus", &bus_clk),
 	/* cpmac and vbus share the same rate */
-	if (!strcmp(id, "cpmac"))
-		return &vbus_clk;
-	if (!strcmp(id, "cpu"))
-		return &cpu_clk;
-	if (!strcmp(id, "dsp"))
-		return &dsp_clk;
-	if (!strcmp(id, "vbus"))
-		return &vbus_clk;
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
+	CLKDEV_INIT("cpmac.0", "cpmac", &vbus_clk),
+	CLKDEV_INIT("cpmac.1", "cpmac", &vbus_clk),
+	CLKDEV_INIT(NULL, "cpu", &cpu_clk),
+	CLKDEV_INIT(NULL, "dsp", &dsp_clk),
+	CLKDEV_INIT(NULL, "vbus", &vbus_clk),
+};
 
 void __init ar7_init_clocks(void)
 {
@@ -462,6 +452,8 @@  void __init ar7_init_clocks(void)
 	}
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
+
+	clkdev_add_table(ar7_clkdev_table, ARRAY_SIZE(ar7_clkdev_table));
 }
 
 /* dummy functions, should not be called */