@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -55,6 +56,14 @@
#define GET_REG_SAMPLL_CLK1(val) ((val >> 22) & 0xfff)
#define GET_REG_SAMPLL_CLK2(val) ((val >> 12) & 0xfff)
+struct sd_hw_data {
+ struct clk_hw hw;
+ u32 conf;
+ struct rzg2l_cpg_priv *priv;
+};
+
+#define to_sd_hw_data(_hw) container_of(_hw, struct sd_hw_data, hw)
+
/**
* struct rzg2l_cpg_priv - Clock Pulse Generator Private Data
*
@@ -150,6 +159,113 @@ rzg2l_cpg_mux_clk_register(const struct cpg_core_clk *core,
return clk_hw->clk;
}
+static int rzg2l_cpg_sd_clk_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ return clk_mux_determine_rate_flags(hw, req, 0);
+}
+
+static int rzg2l_cpg_sd_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct sd_hw_data *hwdata = to_sd_hw_data(hw);
+ struct rzg2l_cpg_priv *priv = hwdata->priv;
+ u32 off = GET_REG_OFFSET(hwdata->conf);
+ u32 shift = GET_SHIFT(hwdata->conf);
+ struct device *dev = priv->dev;
+ const u32 clk_src_266 = 2;
+ u32 bitmask;
+ u32 msk;
+ u32 val;
+ int ret;
+
+ /*
+ * As per the HW manual, we should not directly switch from 533 MHz to
+ * 400 MHz and vice versa. To change the setting from 2’b01 (533 MHz)
+ * to 2’b10 (400 MHz) or vice versa, Switch to 2’b11 (266 MHz) first,
+ * and then switch to the target setting (2’b01 (533 MHz) or 2’b10
+ * (400 MHz)).
+ * Setting a value of '0' to the SEL_SDHI0_SET or SEL_SDHI1_SET clock
+ * switching register is prohibited.
+ * The clock mux has 3 input clocks(533 MHz,400 MHz, and 266 MHz), and
+ * the index to value mapping is done by adding 1 to the index.
+ */
+ bitmask = (GENMASK(GET_WIDTH(hwdata->conf) - 1, 0) << shift) << 16;
+ if (index != clk_src_266) {
+ writel(bitmask | ((clk_src_266 + 1) << shift), priv->base + off);
+
+ msk = off ? CPG_CLKSTATUS_SELSDHI1_STS : CPG_CLKSTATUS_SELSDHI0_STS;
+
+ ret = readl_poll_timeout(priv->base + CPG_CLKSTATUS,
+ val, !(val & msk), 100,
+ CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "failed to switch clk source\n");
+ return ret;
+ }
+ }
+
+ writel(bitmask | ((index + 1) << shift), priv->base + off);
+
+ return 0;
+}
+
+static u8 rzg2l_cpg_sd_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct sd_hw_data *hwdata = to_sd_hw_data(hw);
+ struct rzg2l_cpg_priv *priv = hwdata->priv;
+ u32 val = readl(priv->base + GET_REG_OFFSET(hwdata->conf));
+
+ val >>= GET_SHIFT(hwdata->conf);
+ val &= GENMASK(GET_WIDTH(hwdata->conf) - 1, 0);
+ if (val) {
+ val--;
+ } else {
+ /* Prohibited clk source, change it to 533 MHz(reset value) */
+ rzg2l_cpg_sd_clk_mux_set_parent(hw, 0);
+ }
+
+ return val;
+}
+
+static const struct clk_ops rzg2l_cpg_sd_clk_mux_ops = {
+ .determine_rate = rzg2l_cpg_sd_clk_mux_determine_rate,
+ .set_parent = rzg2l_cpg_sd_clk_mux_set_parent,
+ .get_parent = rzg2l_cpg_sd_clk_mux_get_parent,
+};
+
+static struct clk * __init
+rzg2l_cpg_sd_mux_clk_register(const struct cpg_core_clk *core,
+ void __iomem *base,
+ struct rzg2l_cpg_priv *priv)
+{
+ struct sd_hw_data *clk_hw_data;
+ struct clk_init_data init;
+ struct clk_hw *clk_hw;
+ int ret;
+
+ clk_hw_data = devm_kzalloc(priv->dev, sizeof(*clk_hw_data), GFP_KERNEL);
+ if (!clk_hw_data)
+ return ERR_PTR(-ENOMEM);
+
+ clk_hw_data->priv = priv;
+ clk_hw_data->conf = core->conf;
+
+ init.name = GET_SHIFT(core->conf) ? "sd1" : "sd0";
+ init.ops = &rzg2l_cpg_sd_clk_mux_ops;
+ init.flags = 0;
+ init.num_parents = core->num_parents;
+ init.parent_names = core->parent_names;
+
+ clk_hw = &clk_hw_data->hw;
+ clk_hw->init = &init;
+
+ ret = devm_clk_hw_register(priv->dev, clk_hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return clk_hw->clk;
+}
+
struct pll_clk {
struct clk_hw hw;
unsigned int conf;
@@ -311,6 +427,9 @@ rzg2l_cpg_register_core_clk(const struct cpg_core_clk *core,
case CLK_TYPE_MUX:
clk = rzg2l_cpg_mux_clk_register(core, priv->base, priv);
break;
+ case CLK_TYPE_SD_MUX:
+ clk = rzg2l_cpg_sd_mux_clk_register(core, priv->base, priv);
+ break;
default:
goto fail;
}
@@ -11,9 +11,15 @@
#define CPG_PL2_DDIV (0x204)
#define CPG_PL3A_DDIV (0x208)
+#define CPG_CLKSTATUS (0x280)
#define CPG_PL3_SSEL (0x408)
#define CPG_PL6_ETH_SSEL (0x418)
+#define CPG_CLKSTATUS_SELSDHI0_STS BIT(28)
+#define CPG_CLKSTATUS_SELSDHI1_STS BIT(29)
+
+#define CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US 20000
+
/* n = 0/1/2 for PLL1/4/6 */
#define CPG_SAMPLL_CLK1(n) (0x04 + (16 * n))
#define CPG_SAMPLL_CLK2(n) (0x08 + (16 * n))
@@ -67,6 +73,9 @@ enum clk_types {
/* Clock with clock source selector */
CLK_TYPE_MUX,
+
+ /* Clock with SD clock source selector */
+ CLK_TYPE_SD_MUX,
};
#define DEF_TYPE(_name, _id, _type...) \
@@ -87,6 +96,9 @@ enum clk_types {
DEF_TYPE(_name, _id, CLK_TYPE_MUX, .conf = _conf, \
.parent_names = _parent_names, .num_parents = _num_parents, \
.flag = _flag, .mux_flags = _mux_flags)
+#define DEF_SD_MUX(_name, _id, _conf, _parent_names, _num_parents) \
+ DEF_TYPE(_name, _id, CLK_TYPE_SD_MUX, .conf = _conf, \
+ .parent_names = _parent_names, .num_parents = _num_parents)
/**
* struct rzg2l_mod_clk - Module Clocks definitions