diff mbox series

[v3,8/9] ARM: mstar: Add OPP table for mercury5

Message ID 20220121193544.23231-9-romain.perier@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show
Series ARM: mstar: cpupll | expand

Commit Message

Romain Perier Jan. 21, 2022, 7:35 p.m. UTC 
From: Daniel Palmer <daniel@0x0f.com>

Add an OPP table for mercury5 so that cpu frequency scaling can
happen.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 arch/arm/boot/dts/mstar-mercury5.dtsi | 36 +++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

Comments

Daniel Palmer Jan. 23, 2022, 5:12 a.m. UTC | #1 
Hi Romain,

On Sat, 22 Jan 2022 at 04:35, Romain Perier <romain.perier@gmail.com> wrote:
>
> From: Daniel Palmer <daniel@0x0f.com>
>
> Add an OPP table for mercury5 so that cpu frequency scaling can
> happen.
>
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
>  arch/arm/boot/dts/mstar-mercury5.dtsi | 36 +++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mstar-mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi
> index a7d0dd9d6132..80a19bd23c9c 100644
> --- a/arch/arm/boot/dts/mstar-mercury5.dtsi
> +++ b/arch/arm/boot/dts/mstar-mercury5.dtsi
> @@ -6,6 +6,42 @@
>
>  #include "mstar-v7.dtsi"
>
> +/ {
> +       cpu0_opp_table: opp_table0 {
> +               compatible = "operating-points-v2";
> +               opp-shared;
> +
> +               opp-100000000 {
> +                       opp-hz = /bits/ 64 <100000000>;
> +                       opp-microvolt = <800000 800000 850000>;
> +                       clock-latency-ns = <300000>;
> +               };
> +
> +               opp-200000000 {
> +                       opp-hz = /bits/ 64 <200000000>;
> +                       opp-microvolt = <850000 850000 880000>;
> +                       clock-latency-ns = <300000>;
> +               };
> +
> +               opp-400000000 {
> +                       opp-hz = /bits/ 64 <400000000>;
> +                       opp-microvolt = <880000 880000 890000>;
> +                       clock-latency-ns = <300000>;
> +               };
> +               opp-600000000 {
> +                       opp-hz = /bits/ 64 <600000000>;
> +                       opp-microvolt = <900000 900000 1000000>;
> +                       clock-latency-ns = <300000>;
> +               };
> +
> +               opp-800000000 {
> +                       opp-hz = /bits/ 64 <800000000>;
> +                       opp-microvolt = <900000 900000 1000000>;
> +                       clock-latency-ns = <300000>;
> +               };
> +       };
> +};
> +
>  &imi {
>         reg = <0xa0000000 0x20000>;
>  };
> --
> 2.34.1
>

I think we should drop this one when applying as the frequencies need
to be checked on the hardware again.
I think they should probably match the msc313e settings that Willy verified.

Cheers,

Daniel
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/mstar-mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi
index a7d0dd9d6132..80a19bd23c9c 100644
--- a/arch/arm/boot/dts/mstar-mercury5.dtsi
+++ b/arch/arm/boot/dts/mstar-mercury5.dtsi
@@ -6,6 +6,42 @@ 
 
 #include "mstar-v7.dtsi"
 
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <800000 800000 850000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <850000 850000 880000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <880000 880000 890000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000 900000 1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000 900000 1000000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+};
+
 &imi {
 	reg = <0xa0000000 0x20000>;
 };