diff mbox series

[v3,5/6] arm64: dts: qcom: sm8150: add ethernet node

Message ID 20220303084824.284946-6-bhupesh.sharma@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series Add ethernet support for Qualcomm SA8155p-ADP board | expand

Commit Message

Bhupesh Sharma March 3, 2022, 8:48 a.m. UTC 
From: Vinod Koul <vkoul@kernel.org>

SM8150 SoC supports ethqos ethernet controller so add the node for it

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bhsharma: Correct ethernet interrupt numbers and add power-domain]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Dmitry Baryshkov March 3, 2022, 10:34 a.m. UTC | #1 
On Thu, 3 Mar 2022 at 11:49, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
>
> From: Vinod Koul <vkoul@kernel.org>
>
> SM8150 SoC supports ethqos ethernet controller so add the node for it

Is it available e.g. in the sm8150 SoC that I have in the phone?

>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> [bhsharma: Correct ethernet interrupt numbers and add power-domain]
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 6012322a5984..2ed231767535 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -915,6 +915,33 @@ gpi_dma0: dma-controller@800000 {
>                         status = "disabled";
>                 };
>
> +               ethernet: ethernet@20000 {
> +                       compatible = "qcom,sm8150-ethqos";
> +                       reg = <0x0 0x00020000 0x0 0x10000>,
> +                             <0x0 0x00036000 0x0 0x100>;
> +                       reg-names = "stmmaceth", "rgmii";
> +                       clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
> +                       clocks = <&gcc GCC_EMAC_AXI_CLK>,
> +                               <&gcc GCC_EMAC_SLV_AHB_CLK>,
> +                               <&gcc GCC_EMAC_PTP_CLK>,
> +                               <&gcc GCC_EMAC_RGMII_CLK>;
> +                       interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "macirq", "eth_lpi";
> +
> +                       power-domains = <&gcc EMAC_GDSC>;
> +                       resets = <&gcc GCC_EMAC_BCR>;
> +
> +                       iommus = <&apps_smmu 0x3C0 0x0>;
> +
> +                       snps,tso;
> +                       rx-fifo-depth = <4096>;
> +                       tx-fifo-depth = <4096>;
> +
> +                       status = "disabled";
> +               };
> +
> +
>                 qupv3_id_0: geniqup@8c0000 {
>                         compatible = "qcom,geni-se-qup";
>                         reg = <0x0 0x008c0000 0x0 0x6000>;
> --
> 2.35.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 6012322a5984..2ed231767535 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -915,6 +915,33 @@  gpi_dma0: dma-controller@800000 {
 			status = "disabled";
 		};
 
+		ethernet: ethernet@20000 {
+			compatible = "qcom,sm8150-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_EMAC_AXI_CLK>,
+				<&gcc GCC_EMAC_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC_PTP_CLK>,
+				<&gcc GCC_EMAC_RGMII_CLK>;
+			interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			power-domains = <&gcc EMAC_GDSC>;
+			resets = <&gcc GCC_EMAC_BCR>;
+
+			iommus = <&apps_smmu 0x3C0 0x0>;
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;