diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
index 4c1f3a6f5eb5..4c3ea84c9474 100644
--- a/drivers/clk/ux500/clk-prcmu.c
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -14,6 +14,7 @@
 #include "clk.h"
 
 #define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw)
+#define to_clk_prcmu_clkout(_hw) container_of(_hw, struct clk_prcmu_clkout, hw)
 
 struct clk_prcmu {
 	struct clk_hw hw;
@@ -21,6 +22,13 @@ struct clk_prcmu {
 	int opp_requested;
 };
 
+struct clk_prcmu_clkout {
+	struct clk_hw hw;
+	u8 clkout_id;
+	u8 source;
+	u8 divider;
+};
+
 /* PRCMU clock operations. */
 
 static int clk_prcmu_prepare(struct clk_hw *hw)
@@ -284,3 +292,110 @@ struct clk_hw *clk_reg_prcmu_opp_volt_scalable(const char *name,
 	return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
 			&clk_prcmu_opp_volt_scalable_ops);
 }
+
+/* The clkout (external) clock is special and need special ops */
+
+static int clk_prcmu_clkout_prepare(struct clk_hw *hw)
+{
+	struct clk_prcmu_clkout *clk = to_clk_prcmu_clkout(hw);
+
+	return prcmu_config_clkout(clk->clkout_id, clk->source, clk->divider);
+}
+
+static void clk_prcmu_clkout_unprepare(struct clk_hw *hw)
+{
+	struct clk_prcmu_clkout *clk = to_clk_prcmu_clkout(hw);
+	int ret;
+
+	/* The clkout clock is disabled by dividing by 0 */
+	ret = prcmu_config_clkout(clk->clkout_id, clk->source, 0);
+	if (ret)
+		pr_err("clk_prcmu: %s failed to disable %s\n", __func__,
+		       clk_hw_get_name(hw));
+}
+
+static unsigned long clk_prcmu_clkout_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_prcmu_clkout *clk = to_clk_prcmu_clkout(hw);
+
+	if (!clk->divider)
+		return 0;
+	return (parent_rate / clk->divider);
+}
+
+static u8 clk_prcmu_clkout_get_parent(struct clk_hw *hw)
+{
+	struct clk_prcmu_clkout *clk = to_clk_prcmu_clkout(hw);
+	return clk->source;
+}
+
+static int clk_prcmu_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_prcmu_clkout *clk = to_clk_prcmu_clkout(hw);
+
+	clk->source = index;
+	/* Make sure the change reaches the hardware immediately */
+	if (clk_hw_is_prepared(hw))
+		return clk_prcmu_clkout_prepare(hw);
+	return 0;
+}
+
+static const struct clk_ops clk_prcmu_clkout_ops = {
+	.prepare = clk_prcmu_clkout_prepare,
+	.unprepare = clk_prcmu_clkout_unprepare,
+	.recalc_rate = clk_prcmu_clkout_recalc_rate,
+	.get_parent = clk_prcmu_clkout_get_parent,
+	.set_parent = clk_prcmu_clkout_set_parent,
+};
+
+struct clk_hw *clk_reg_prcmu_clkout(const char *name,
+				    const char * const *parent_names,
+				    int num_parents,
+				    u8 source, u8 divider)
+
+{
+	struct clk_prcmu_clkout *clk;
+	struct clk_init_data clk_prcmu_clkout_init;
+	u8 clkout_id;
+	int ret;
+
+	if (!name) {
+		pr_err("clk_prcmu_clkout: %s invalid arguments passed\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!strcmp(name, "clkout1"))
+		clkout_id = 0;
+	else if (!strcmp(name, "clkout2"))
+		clkout_id = 1;
+	else {
+		pr_err("clk_prcmu_clkout: %s bad clock name\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	clk->clkout_id = clkout_id;
+	clk->source = source;
+	clk->divider = divider;
+
+	clk_prcmu_clkout_init.name = name;
+	clk_prcmu_clkout_init.ops = &clk_prcmu_clkout_ops;
+	clk_prcmu_clkout_init.flags = CLK_GET_RATE_NOCACHE;
+	clk_prcmu_clkout_init.parent_names = parent_names;
+	clk_prcmu_clkout_init.num_parents = num_parents;
+	clk->hw.init = &clk_prcmu_clkout_init;
+
+	ret = clk_hw_register(NULL, &clk->hw);
+	if (ret)
+		goto free_clkout;
+
+	return &clk->hw;
+free_clkout:
+	kfree(clk);
+	pr_err("clk_prcmu_clkout: %s failed to register clk\n", __func__);
+	return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
index b443c3f257b1..91003cf8003c 100644
--- a/drivers/clk/ux500/clk.h
+++ b/drivers/clk/ux500/clk.h
@@ -60,6 +60,11 @@ struct clk_hw *clk_reg_prcmu_opp_volt_scalable(const char *name,
 					       unsigned long rate,
 					       unsigned long flags);
 
+struct clk_hw *clk_reg_prcmu_clkout(const char *name,
+				    const char * const *parent_names,
+				    int num_parents,
+				    u8 source, u8 divider);
+
 struct clk *clk_reg_sysctrl_gate(struct device *dev,
 				 const char *name,
 				 const char *parent_name,
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index 6aa89645f5fa..e855ce35db0e 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -17,6 +17,7 @@
 
 static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
 static struct clk *prcc_kclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
+static struct clk_hw *clkout_clk[2];
 
 #define PRCC_SHOW(clk, base, bit) \
 	clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit]
@@ -56,12 +57,78 @@ static struct clk_hw_onecell_data u8500_prcmu_hw_clks = {
 	.num = PRCMU_NUM_CLKS,
 };
 
+/* Essentially names for the first PRCMU_CLKSRC_* defines */
+static const char * const u8500_clkout_parents[] = {
+	"clk38m_to_clkgen",
+	"aclk",
+	/* Just called "sysclk" in documentation */
+	"ab8500_sysclk",
+	"lcdclk",
+	"sdmmcclk",
+	"tvclk",
+	"timclk",
+	/* CLK009 is not implemented, add it if you need it */
+	"clk009",
+};
+
+static struct clk_hw *ux500_clkout_get(struct of_phandle_args *clkspec,
+				       void *data)
+{
+	u32 id, source, divider;
+	struct clk_hw *clkout;
+
+	if (clkspec->args_count != 3)
+		return  ERR_PTR(-EINVAL);
+
+	id = clkspec->args[0];
+	source = clkspec->args[1];
+	divider = clkspec->args[2];
+
+	if (id > 1) {
+		pr_err("%s: invalid clkout ID %d\n", __func__, id);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (clkout_clk[id]) {
+		pr_info("%s: clkout%d already registered, not reconfiguring\n",
+			__func__, id + 1);
+		return clkout_clk[id];
+	}
+
+	if (source > 7) {
+		pr_err("%s: invalid source ID %d\n", __func__, source);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (divider == 0 || divider > 63) {
+		pr_err("%s: invalid divider %d\n", __func__, divider);
+		return ERR_PTR(-EINVAL);
+	}
+
+	pr_debug("registering clkout%d with source %d and divider %d\n",
+		 id + 1, source, divider);
+
+	clkout = clk_reg_prcmu_clkout(id ? "clkout2" : "clkout1",
+				      u8500_clkout_parents,
+				      ARRAY_SIZE(u8500_clkout_parents),
+				      source, divider);
+	if (IS_ERR(clkout)) {
+		pr_err("failed to register clkout%d\n",  id + 1);
+		return ERR_CAST(clkout);
+	}
+
+	clkout_clk[id] = clkout;
+
+	return clkout;
+}
+
 static void u8500_clk_init(struct device_node *np)
 {
 	struct prcmu_fw_version *fw_version;
 	struct device_node *child = NULL;
 	const char *sgaclk_parent = NULL;
 	struct clk *clk, *rtc_clk, *twd_clk;
+	struct clk_hw *hw;
 	u32 bases[CLKRST_MAX];
 	struct u8500_prcc_reset *rstc;
 	int i;
@@ -99,7 +166,17 @@ static void u8500_clk_init(struct device_node *np)
 		clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
 				   CLK_IGNORE_UNUSED);
 
-	/* FIXME: Add sys, ulp and int clocks here. */
+	/*
+	 * Read-only clocks that only return their current rate, only used
+	 * as parents to other clocks and not visible in the device tree.
+	 * clk38m_to_clkgen is the same as the SYSCLK, i.e. the root clock.
+	 */
+	hw = clk_reg_prcmu_rate("clk38m_to_clkgen", NULL, PRCMU_SYSCLK,
+				CLK_IGNORE_UNUSED);
+	hw = clk_reg_prcmu_rate("aclk", NULL, PRCMU_ACLK,
+				CLK_IGNORE_UNUSED);
+
+	/* TODO: add CLK009 if needed */
 
 	rtc_clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
 				CLK_IGNORE_UNUSED,
@@ -223,12 +300,6 @@ static void u8500_clk_init(struct device_node *np)
 	twd_clk = clk_register_fixed_factor(NULL, "smp_twd", "armss",
 				CLK_IGNORE_UNUSED, 1, 2);
 
-	/*
-	 * FIXME: Add special handled PRCMU clocks here:
-	 * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
-	 * 2. ab9540_clkout1yuv, see clkout0yuv
-	 */
-
 	/* PRCC P-clocks */
 	clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", bases[CLKRST1_INDEX],
 				BIT(0), 0);
@@ -526,6 +597,9 @@ static void u8500_clk_init(struct device_node *np)
 			of_clk_add_hw_provider(child, of_clk_hw_onecell_get,
 					       &u8500_prcmu_hw_clks);
 
+		if (of_node_name_eq(child, "clkout-clock"))
+			of_clk_add_hw_provider(child, ux500_clkout_get, NULL);
+
 		if (of_node_name_eq(child, "prcc-periph-clock"))
 			of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
 
