diff mbox series

[PATCHv1,18/19] arm64: dts: rockchip: Add base DT for rk3588 SoC

Message ID 20220422170920.401914-19-sebastian.reichel@collabora.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Basic RK3588 Support | expand

Commit Message

Sebastian Reichel April 22, 2022, 5:09 p.m. UTC 
From: Kever Yang <kever.yang@rock-chips.com>

This initial version supports (single core) CPU, dma, interrupts, timers,
UART and SDHCI. In short - everything necessary to boot Linux on this
system on chip.

The DT is split into rk3588 and rk3588s, which is a reduced version
(i.e. with less peripherals) of the former.

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[rebase, squash and reword commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588.dtsi  |   6 +
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 501 ++++++++++++++++++++++
 include/dt-bindings/clock/rk3588-cru.h    |   1 +
 3 files changed, 508 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s.dtsi

Comments

Robin Murphy April 22, 2022, 6:16 p.m. UTC | #1 
On 2022-04-22 18:09, Sebastian Reichel wrote:
> From: Kever Yang <kever.yang@rock-chips.com>
> 
> This initial version supports (single core) CPU, dma, interrupts, timers,
> UART and SDHCI. In short - everything necessary to boot Linux on this
> system on chip.
> 
> The DT is split into rk3588 and rk3588s, which is a reduced version
> (i.e. with less peripherals) of the former.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> [rebase, squash and reword commit message]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>   arch/arm64/boot/dts/rockchip/rk3588.dtsi  |   6 +
>   arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 501 ++++++++++++++++++++++
>   include/dt-bindings/clock/rk3588-cru.h    |   1 +
>   3 files changed, 508 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588.dtsi
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> new file mode 100644
> index 000000000000..ddb3ccff1299
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include "rk3588s.dtsi"
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> new file mode 100644
> index 000000000000..f7d3ad4384b3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -0,0 +1,501 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/clock/rk3588-cru.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> +	compatible = "rockchip,rk3588";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +		serial5 = &uart5;
> +		serial6 = &uart6;
> +		serial7 = &uart7;
> +		serial8 = &uart8;
> +		serial9 = &uart9;
> +	};
> +
> +	clocks {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;

I'm pretty sure that doing clocks as fake buses fell out of favour long ago.

> +
> +		spll: spll {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <702000000>;
> +			clock-output-names = "spll";
> +		};
> +
> +		xin24m: xin24m {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <24000000>;
> +			clock-output-names = "xin24m";
> +		};
> +
> +		xin32k: xin32k {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32768>;
> +			clock-output-names = "xin32k";
> +		};

Do those two really belong in the SoC DTSI? On previous SoCs they're 
typically external inputs, and while the 24MHz is usually a crystal 
which can be largely taken for granted, the 32KHz is often provided by 
an RTC chip or similar which might need proper modelling.

> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu_l0>;
> +				};
> +			};
> +		};
> +
> +		cpu_l0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			capacity-dmips-mhz = <530>;
> +			clocks = <&scmi_clk SCMI_CLK_CPUL>;
> +			i-cache-size = <32768>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <128>;
> +			d-cache-size = <32768>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&l2_cache_l0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <228>;
> +		};

Is there any particular reason for not including more of the CPUs?

> +
> +		l2_cache_l0: l2-cache-l0 {
> +			compatible = "cache";
> +			cache-size = <131072>;
> +			cache-line-size = <64>;
> +			cache-sets = <512>;
> +			next-level-cache = <&l3_cache>;
> +		};
> +
> +		l3_cache: l3-cache {
> +			compatible = "cache";
> +			cache-size = <3145728>;
> +			cache-line-size = <64>;
> +			cache-sets = <4096>;
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,armv8-pmuv3";

Please use the correct Cortex-A55 compatible.

> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-affinity = <&cpu_l0>;

Is affinity meaningful for a single CPU? If this is going to need to be 
a partitioned PPI once the Cortex-A76 PMU shows up as well, start as you 
mean to go on.

> +	};
> +
> +	firmware {
> +		optee: optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +
> +		scmi: scmi {
> +			compatible = "arm,scmi-smc";
> +			shmem = <&scmi_shmem>;
> +			arm,smc-id = <0x82000010>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			scmi_clk: protocol@14 {
> +				reg = <0x14>;
> +				#clock-cells = <1>;
> +
> +				assigned-clocks = <&scmi_clk SCMI_SPLL>;
> +				assigned-clock-rates = <700000000>;
> +			};
> +
> +			scmi_reset: protocol@16 {
> +				reg = <0x16>;
> +				#reset-cells = <1>;
> +			};
> +		};
> +
> +		sdei: sdei {
> +			compatible = "arm,sdei-1.0";
> +			method = "smc";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;

A mask representing all 4 of one (of 8) CPUs, for a GICv2 which we don't 
have? I doubt it ;)

> +	};
> +
> +	sram@10f000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0x0010f000 0x0 0x100>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x0 0x0010f000 0x100>;
> +
> +		scmi_shmem: sram@0 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x0 0x100>;
> +		};
> +	};
> +
> +	php_grf: syscon@fd5b0000 {
> +		compatible = "rockchip,rk3588-php-grf", "syscon";
> +		reg = <0x0 0xfd5b0000 0x0 0x1000>;
> +	};
> +
> +	ioc: syscon@fd5f0000 {
> +		compatible = "rockchip,rk3588-ioc", "syscon";
> +		reg = <0x0 0xfd5f0000 0x0 0x10000>;
> +	};
> +
> +	syssram: sram@fd600000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0xfd600000 0x0 0x100000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0xfd600000 0x100000>;
> +	};
> +
> +	cru: clock-controller@fd7c0000 {
> +		compatible = "rockchip,rk3588-cru";
> +		rockchip,grf = <&php_grf>;
> +		reg = <0x0 0xfd7c0000 0x0 0x5c000>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +
> +		assigned-clocks =
> +			<&cru PLL_PPLL>, <&cru PLL_AUPLL>,
> +			<&cru PLL_NPLL>, <&cru PLL_GPLL>,
> +			<&cru ACLK_CENTER_ROOT>,
> +			<&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
> +			<&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
> +			<&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
> +			<&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
> +			<&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
> +			<&cru CLK_GPU>;
> +		assigned-clock-rates =
> +			<100000000>, <786432000>,
> +			<850000000>, <1188000000>,
> +			<702000000>,
> +			<400000000>, <500000000>,
> +			<800000000>, <100000000>,
> +			<400000000>, <100000000>,
> +			<200000000>, <500000000>,
> +			<375000000>, <150000000>,
> +			<200000000>;
> +	};
> +
> +	sdhci: mmc@fe2e0000 {
> +		compatible = "rockchip,rk3588-dwcmshc", "snps,dwcmshc-sdhci";
> +		reg = <0x0 0xfe2e0000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> +		assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
> +		assigned-clock-rates = <200000000>, <24000000>, <200000000>;
> +		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
> +			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
> +			 <&cru TMCLK_EMMC>;
> +		clock-names = "core", "bus", "axi", "block", "timer";
> +		resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
> +			 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
> +			 <&cru SRST_T_EMMC>;
> +		reset-names = "core", "bus", "axi", "block", "timer";
> +		max-frequency = <200000000>;
> +		status = "disabled";
> +	};
> +
> +	gic: interrupt-controller@fe600000 {
> +		compatible = "arm,gic-v3";
> +		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
> +		      <0x0 0xfe680000 0 0x100000>; /* GICR */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		its: interrupt-controller@fe640000 {
> +			compatible = "arm,gic-v3-its";
> +			msi-controller;
> +			#msi-cells = <1>;
> +			reg = <0x0 0xfe640000 0x0 0x20000>;
> +		};
> +	};

Does the ITS (and other bits related to GIC memory accesses) actually 
work, or will we have more of the same issues as RK356x?

Thanks,
Robin.
Krzysztof Kozlowski April 23, 2022, 10:07 a.m. UTC | #2 
On 22/04/2022 19:09, Sebastian Reichel wrote:

Thank you for your patch. There is something to discuss/improve.

> +
> +	clocks {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;

There are no children with unit addresses... this should not be a simple
bus.

> +
> +		spll: spll {

Generic node names please, so either "clock-0" or "spll-clock" etc.

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <702000000>;
> +			clock-output-names = "spll";
> +		};
> +
> +		xin24m: xin24m {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <24000000>;
> +			clock-output-names = "xin24m";
> +		};
> +
> +		xin32k: xin32k {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32768>;
> +			clock-output-names = "xin32k";
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu_l0>;
> +				};
> +			};
> +		};
> +
> +		cpu_l0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			capacity-dmips-mhz = <530>;
> +			clocks = <&scmi_clk SCMI_CLK_CPUL>;
> +			i-cache-size = <32768>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <128>;
> +			d-cache-size = <32768>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&l2_cache_l0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <228>;
> +		};
> +
> +		l2_cache_l0: l2-cache-l0 {
> +			compatible = "cache";
> +			cache-size = <131072>;
> +			cache-line-size = <64>;
> +			cache-sets = <512>;
> +			next-level-cache = <&l3_cache>;
> +		};
> +
> +		l3_cache: l3-cache {
> +			compatible = "cache";
> +			cache-size = <3145728>;
> +			cache-line-size = <64>;
> +			cache-sets = <4096>;
> +		};
> +	};
> +
> +	arm-pmu {

Generic node name, so just "pmu" unless there is goign to be a another
PMU node?

> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-affinity = <&cpu_l0>;
> +	};
> +
> +	firmware {
> +		optee: optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +
> +		scmi: scmi {
> +			compatible = "arm,scmi-smc";
> +			shmem = <&scmi_shmem>;
> +			arm,smc-id = <0x82000010>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			scmi_clk: protocol@14 {
> +				reg = <0x14>;
> +				#clock-cells = <1>;
> +
> +				assigned-clocks = <&scmi_clk SCMI_SPLL>;
> +				assigned-clock-rates = <700000000>;
> +			};
> +
> +			scmi_reset: protocol@16 {
> +				reg = <0x16>;
> +				#reset-cells = <1>;
> +			};
> +		};
> +
> +		sdei: sdei {
> +			compatible = "arm,sdei-1.0";
> +			method = "smc";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	sram@10f000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0x0010f000 0x0 0x100>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x0 0x0010f000 0x100>;
> +
> +		scmi_shmem: sram@0 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x0 0x100>;
> +		};
> +	};
> +
> +	php_grf: syscon@fd5b0000 {
> +		compatible = "rockchip,rk3588-php-grf", "syscon";
> +		reg = <0x0 0xfd5b0000 0x0 0x1000>;
> +	};
> +
> +	ioc: syscon@fd5f0000 {
> +		compatible = "rockchip,rk3588-ioc", "syscon";
> +		reg = <0x0 0xfd5f0000 0x0 0x10000>;
> +	};
> +
> +	syssram: sram@fd600000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0xfd600000 0x0 0x100000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0xfd600000 0x100000>;

No children here, so why do you need it?

> +	};
> +

Best regards,
Krzysztof
Sebastian Reichel April 25, 2022, 6:14 p.m. UTC | #3 
Hi,

Thanks for having a look.

On Fri, Apr 22, 2022 at 07:16:13PM +0100, Robin Murphy wrote:
> On 2022-04-22 18:09, Sebastian Reichel wrote:
> > ...
> > +		cpu_l0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a55";
> > +			reg = <0x0>;
> > +			enable-method = "psci";
> > +			capacity-dmips-mhz = <530>;
> > +			clocks = <&scmi_clk SCMI_CLK_CPUL>;
> > +			i-cache-size = <32768>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <128>;
> > +			d-cache-size = <32768>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&l2_cache_l0>;
> > +			#cooling-cells = <2>;
> > +			dynamic-power-coefficient = <228>;
> > +		};
> 
> Is there any particular reason for not including more of the CPUs?

Yes, see below.

> > +		its: interrupt-controller@fe640000 {
> > +			compatible = "arm,gic-v3-its";
> > +			msi-controller;
> > +			#msi-cells = <1>;
> > +			reg = <0x0 0xfe640000 0x0 0x20000>;
> > +		};
> > +	};
> 
> Does the ITS (and other bits related to GIC memory accesses) actually work,
> or will we have more of the same issues as RK356x?

The GIC in RK3588 is has the same shareability limitation as the RK356x,
but fixed the 32bit limitation. That's why I just added the boot cpu core
for now; adding any other cpu core breaks the boot without the downstream
shareability patch and I'm still investigating.

-- Sebastian
Peter Geis April 25, 2022, 7:37 p.m. UTC | #4 
On Mon, Apr 25, 2022 at 2:14 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:
>
> Hi,
>
> Thanks for having a look.
>
> On Fri, Apr 22, 2022 at 07:16:13PM +0100, Robin Murphy wrote:
> > On 2022-04-22 18:09, Sebastian Reichel wrote:
> > > ...
> > > +           cpu_l0: cpu@0 {
> > > +                   device_type = "cpu";
> > > +                   compatible = "arm,cortex-a55";
> > > +                   reg = <0x0>;
> > > +                   enable-method = "psci";
> > > +                   capacity-dmips-mhz = <530>;
> > > +                   clocks = <&scmi_clk SCMI_CLK_CPUL>;
> > > +                   i-cache-size = <32768>;
> > > +                   i-cache-line-size = <64>;
> > > +                   i-cache-sets = <128>;
> > > +                   d-cache-size = <32768>;
> > > +                   d-cache-line-size = <64>;
> > > +                   d-cache-sets = <128>;
> > > +                   next-level-cache = <&l2_cache_l0>;
> > > +                   #cooling-cells = <2>;
> > > +                   dynamic-power-coefficient = <228>;
> > > +           };
> >
> > Is there any particular reason for not including more of the CPUs?
>
> Yes, see below.
>
> > > +           its: interrupt-controller@fe640000 {
> > > +                   compatible = "arm,gic-v3-its";
> > > +                   msi-controller;
> > > +                   #msi-cells = <1>;
> > > +                   reg = <0x0 0xfe640000 0x0 0x20000>;
> > > +           };
> > > +   };
> >
> > Does the ITS (and other bits related to GIC memory accesses) actually work,
> > or will we have more of the same issues as RK356x?
>
> The GIC in RK3588 is has the same shareability limitation as the RK356x,
> but fixed the 32bit limitation. That's why I just added the boot cpu core
> for now; adding any other cpu core breaks the boot without the downstream
> shareability patch and I'm still investigating.

There's no way to avoid this issue unfortunately.
See my awful hacked together patch:
https://gitlab.com/pine64-org/quartz-bsp/linux-next/-/commit/8b34fd2a74321f8f5d7731b63eee0f9e03d1393b

Considering the ITS exists pretty much just for MSIs, and my PCIe
series introduces support for legacy interrupts, you may get away with
doing the mbi-alias currently implemented in rk356x.
Note, there are *some* compatibility issues with mbi-alias MSIs,
particularly with high IRQ cards like the Intel x520.

>
> -- Sebastian
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
Rob Herring May 2, 2022, 10:20 p.m. UTC | #5 
On Fri, Apr 22, 2022 at 07:09:19PM +0200, Sebastian Reichel wrote:
> From: Kever Yang <kever.yang@rock-chips.com>
> 
> This initial version supports (single core) CPU, dma, interrupts, timers,
> UART and SDHCI. In short - everything necessary to boot Linux on this
> system on chip.
> 
> The DT is split into rk3588 and rk3588s, which is a reduced version
> (i.e. with less peripherals) of the former.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> [rebase, squash and reword commit message]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---

[...]

> diff --git a/include/dt-bindings/clock/rk3588-cru.h b/include/dt-bindings/clock/rk3588-cru.h
> index d51e6ed939b3..2f046f048a83 100644
> --- a/include/dt-bindings/clock/rk3588-cru.h
> +++ b/include/dt-bindings/clock/rk3588-cru.h
> @@ -1451,6 +1451,7 @@
>  #define SCMI_CRYPTO_CORE		20
>  #define SCMI_CRYPTO_PKA			21
>  #define SCMI_SPLL			22
> +#define SCMI_HCLK_SD			23

Belongs in the header patch?

>  
>  /********Name=SECURE_SOFTRST_CON00,Offset=0xA00********/
>  #define SRST_A_SECURE_NS_BIU		10
> -- 
> 2.35.1
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
new file mode 100644
index 000000000000..ddb3ccff1299
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -0,0 +1,6 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588s.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
new file mode 100644
index 000000000000..f7d3ad4384b3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -0,0 +1,501 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rk3588-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "rockchip,rk3588";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		spll: spll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <702000000>;
+			clock-output-names = "spll";
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "xin24m";
+		};
+
+		xin32k: xin32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xin32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <228>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <3145728>;
+			cache-line-size = <64>;
+			cache-sets = <4096>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu_l0>;
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0x82000010>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+
+				assigned-clocks = <&scmi_clk SCMI_SPLL>;
+				assigned-clock-rates = <700000000>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+
+		sdei: sdei {
+			compatible = "arm,sdei-1.0";
+			method = "smc";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	sram@10f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x0010f000 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x0010f000 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	php_grf: syscon@fd5b0000 {
+		compatible = "rockchip,rk3588-php-grf", "syscon";
+		reg = <0x0 0xfd5b0000 0x0 0x1000>;
+	};
+
+	ioc: syscon@fd5f0000 {
+		compatible = "rockchip,rk3588-ioc", "syscon";
+		reg = <0x0 0xfd5f0000 0x0 0x10000>;
+	};
+
+	syssram: sram@fd600000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfd600000 0x0 0x100000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xfd600000 0x100000>;
+	};
+
+	cru: clock-controller@fd7c0000 {
+		compatible = "rockchip,rk3588-cru";
+		rockchip,grf = <&php_grf>;
+		reg = <0x0 0xfd7c0000 0x0 0x5c000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		assigned-clocks =
+			<&cru PLL_PPLL>, <&cru PLL_AUPLL>,
+			<&cru PLL_NPLL>, <&cru PLL_GPLL>,
+			<&cru ACLK_CENTER_ROOT>,
+			<&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
+			<&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
+			<&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
+			<&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
+			<&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
+			<&cru CLK_GPU>;
+		assigned-clock-rates =
+			<100000000>, <786432000>,
+			<850000000>, <1188000000>,
+			<702000000>,
+			<400000000>, <500000000>,
+			<800000000>, <100000000>,
+			<400000000>, <100000000>,
+			<200000000>, <500000000>,
+			<375000000>, <150000000>,
+			<200000000>;
+	};
+
+	sdhci: mmc@fe2e0000 {
+		compatible = "rockchip,rk3588-dwcmshc", "snps,dwcmshc-sdhci";
+		reg = <0x0 0xfe2e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
+		assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+			 <&cru TMCLK_EMMC>;
+		clock-names = "core", "bus", "axi", "block", "timer";
+		resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+			 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+			 <&cru SRST_T_EMMC>;
+		reset-names = "core", "bus", "axi", "block", "timer";
+		max-frequency = <200000000>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fe600000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
+		      <0x0 0xfe680000 0 0x100000>; /* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		its: interrupt-controller@fe640000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xfe640000 0x0 0x20000>;
+		};
+	};
+
+	dmac0: dma-controller@fea10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_DMAC0>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+	};
+
+	dmac1: dma-controller@fea30000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea30000 0x0 0x4000>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_DMAC1>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+	};
+
+	dmac2: dma-controller@fed10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfed10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_DMAC2>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+	};
+
+	uart0: serial@fd890000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfd890000 0x0 0x100>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac0 6>, <&dmac0 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0m1_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@feb40000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb40000 0x0 0x100>;
+		interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac0 8>, <&dmac0 9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1m1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@feb50000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb50000 0x0 0x100>;
+		interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac0 10>, <&dmac0 11>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@feb60000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb60000 0x0 0x100>;
+		interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac0 12>, <&dmac0 13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m1_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@feb70000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb70000 0x0 0x100>;
+		interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac1 9>, <&dmac1 10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4m1_xfer>;
+		status = "disabled";
+	};
+
+	uart5: serial@feb80000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb80000 0x0 0x100>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac1 11>, <&dmac1 12>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5m1_xfer>;
+		status = "disabled";
+	};
+
+	uart6: serial@feb90000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb90000 0x0 0x100>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac1 13>, <&dmac1 14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart6m1_xfer>;
+		status = "disabled";
+	};
+
+	uart7: serial@feba0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeba0000 0x0 0x100>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac2 7>, <&dmac2 8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart7m1_xfer>;
+		status = "disabled";
+	};
+
+	uart8: serial@febb0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebb0000 0x0 0x100>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac2 9>, <&dmac2 10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart8m1_xfer>;
+		status = "disabled";
+	};
+
+	uart9: serial@febc0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebc0000 0x0 0x100>;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dmas = <&dmac2 11>, <&dmac2 12>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart9m1_xfer>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3588-pinctrl";
+		rockchip,grf = <&ioc>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@fd8a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfd8a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@fec20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec20000 0x0 0x100>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@fec30000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec30000 0x0 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@fec40000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec40000 0x0 0x100>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@fec50000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec50000 0x0 0x100>;
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rk3588s-pinctrl.dtsi"
diff --git a/include/dt-bindings/clock/rk3588-cru.h b/include/dt-bindings/clock/rk3588-cru.h
index d51e6ed939b3..2f046f048a83 100644
--- a/include/dt-bindings/clock/rk3588-cru.h
+++ b/include/dt-bindings/clock/rk3588-cru.h
@@ -1451,6 +1451,7 @@ 
 #define SCMI_CRYPTO_CORE		20
 #define SCMI_CRYPTO_PKA			21
 #define SCMI_SPLL			22
+#define SCMI_HCLK_SD			23
 
 /********Name=SECURE_SOFTRST_CON00,Offset=0xA00********/
 #define SRST_A_SECURE_NS_BIU		10