| Message ID | 20220428115620.13512-13-rex-bc.chen@mediatek.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Cleanup MediaTek clk reset drivers and support MT8192/MT8195 | expand |
Il 28/04/22 13:56, Rex-BC Chen ha scritto: > To support reset of infra_ao, add the bit definitions for MT8195. > The infra_ao reset includes 5 banks and 32 bits for each bank. > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On 28/04/2022 13:56, Rex-BC Chen wrote: > To support reset of infra_ao, add the bit definitions for MT8195. > The infra_ao reset includes 5 banks and 32 bits for each bank. > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > --- > include/dt-bindings/reset/mt8195-resets.h | 170 ++++++++++++++++++++++ > 1 file changed, 170 insertions(+) > > diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h > index a26bccc8b957..463114014483 100644 > --- a/include/dt-bindings/reset/mt8195-resets.h > +++ b/include/dt-bindings/reset/mt8195-resets.h > @@ -7,6 +7,7 @@ > #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195 > #define _DT_BINDINGS_RESET_CONTROLLER_MT8195 > > +/* TOPRGU resets */ > #define MT8195_TOPRGU_CONN_MCU_SW_RST 0 > #define MT8195_TOPRGU_INFRA_GRST_SW_RST 1 > #define MT8195_TOPRGU_APU_SW_RST 2 > @@ -26,4 +27,173 @@ > > #define MT8195_TOPRGU_SW_RST_NUM 16 > > +/* INFRA RST0 */ > +#define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 > +#define MT8195_INFRA_RST0_RSV0 1 > +#define MT8195_INFRA_RST0_DISP_PWM1_SWRST 2 > +#define MT8195_INFRA_RST0_RSV1 3 > +#define MT8195_INFRA_RST0_MSDC3_SWRST 4 > +#define MT8195_INFRA_RST0_MSDC2_SWRST 5 > +#define MT8195_INFRA_RST0_MSDC1_SWRST 6 > +#define MT8195_INFRA_RST0_MSDC0_SWRST 7 > +#define MT8195_INFRA_RST0_RSV2 8 > +#define MT8195_INFRA_RST0_AP_DMA_SWRST 9 > +#define MT8195_INFRA_RST0_MIPI_D_SWRST 10 > +#define MT8195_INFRA_RST0_RSV3 11 > +#define MT8195_INFRA_RST0_RSV4 12 > +#define MT8195_INFRA_RST0_SSUSB_TOP_SWRST 13 > +#define MT8195_INFRA_RST0_DISP_PWM_SWRST 14 > +#define MT8195_INFRA_RST0_AUXADC_SWRST 15 > +#define MT8195_INFRA_RST0_RSV5 16 > +#define MT8195_INFRA_RST0_RSV6 17 > +#define MT8195_INFRA_RST0_RSV7 18 > +#define MT8195_INFRA_RST0_RSV8 19 > +#define MT8195_INFRA_RST0_RSV9 20 > +#define MT8195_INFRA_RST0_RSV10 21 > +#define MT8195_INFRA_RST0_RSV11 22 > +#define MT8195_INFRA_RST0_RSV12 23 > +#define MT8195_INFRA_RST0_RSV13 24 > +#define MT8195_INFRA_RST0_RSV14 25 > +#define MT8195_INFRA_RST0_RSV15 26 > +#define MT8195_INFRA_RST0_RSV16 27 > +#define MT8195_INFRA_RST0_RSV17 28 > +#define MT8195_INFRA_RST0_RSV18 29 > +#define MT8195_INFRA_RST0_RSV19 30 > +#define MT8195_INFRA_RST0_RSV20 31 These are not proper IDs... don't work-around usage of bits with fake reserved IDs... Best regards, Krzysztof
Il 29/04/22 23:13, Krzysztof Kozlowski ha scritto: > On 28/04/2022 13:56, Rex-BC Chen wrote: >> To support reset of infra_ao, add the bit definitions for MT8195. >> The infra_ao reset includes 5 banks and 32 bits for each bank. >> >> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> >> --- >> include/dt-bindings/reset/mt8195-resets.h | 170 ++++++++++++++++++++++ >> 1 file changed, 170 insertions(+) >> >> diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h >> index a26bccc8b957..463114014483 100644 >> --- a/include/dt-bindings/reset/mt8195-resets.h >> +++ b/include/dt-bindings/reset/mt8195-resets.h >> @@ -7,6 +7,7 @@ >> #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195 >> #define _DT_BINDINGS_RESET_CONTROLLER_MT8195 >> >> +/* TOPRGU resets */ >> #define MT8195_TOPRGU_CONN_MCU_SW_RST 0 >> #define MT8195_TOPRGU_INFRA_GRST_SW_RST 1 >> #define MT8195_TOPRGU_APU_SW_RST 2 >> @@ -26,4 +27,173 @@ >> >> #define MT8195_TOPRGU_SW_RST_NUM 16 >> >> +/* INFRA RST0 */ >> +#define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 >> +#define MT8195_INFRA_RST0_RSV0 1 >> +#define MT8195_INFRA_RST0_DISP_PWM1_SWRST 2 >> +#define MT8195_INFRA_RST0_RSV1 3 >> +#define MT8195_INFRA_RST0_MSDC3_SWRST 4 >> +#define MT8195_INFRA_RST0_MSDC2_SWRST 5 >> +#define MT8195_INFRA_RST0_MSDC1_SWRST 6 >> +#define MT8195_INFRA_RST0_MSDC0_SWRST 7 >> +#define MT8195_INFRA_RST0_RSV2 8 >> +#define MT8195_INFRA_RST0_AP_DMA_SWRST 9 >> +#define MT8195_INFRA_RST0_MIPI_D_SWRST 10 >> +#define MT8195_INFRA_RST0_RSV3 11 >> +#define MT8195_INFRA_RST0_RSV4 12 >> +#define MT8195_INFRA_RST0_SSUSB_TOP_SWRST 13 >> +#define MT8195_INFRA_RST0_DISP_PWM_SWRST 14 >> +#define MT8195_INFRA_RST0_AUXADC_SWRST 15 >> +#define MT8195_INFRA_RST0_RSV5 16 >> +#define MT8195_INFRA_RST0_RSV6 17 >> +#define MT8195_INFRA_RST0_RSV7 18 >> +#define MT8195_INFRA_RST0_RSV8 19 >> +#define MT8195_INFRA_RST0_RSV9 20 >> +#define MT8195_INFRA_RST0_RSV10 21 >> +#define MT8195_INFRA_RST0_RSV11 22 >> +#define MT8195_INFRA_RST0_RSV12 23 >> +#define MT8195_INFRA_RST0_RSV13 24 >> +#define MT8195_INFRA_RST0_RSV14 25 >> +#define MT8195_INFRA_RST0_RSV15 26 >> +#define MT8195_INFRA_RST0_RSV16 27 >> +#define MT8195_INFRA_RST0_RSV17 28 >> +#define MT8195_INFRA_RST0_RSV18 29 >> +#define MT8195_INFRA_RST0_RSV19 30 >> +#define MT8195_INFRA_RST0_RSV20 31 > > These are not proper IDs... don't work-around usage of bits with fake > reserved IDs... Hello Krzysztof, Actually, I get that it may seem that Rex is trying to cheat with fake reserved numbers... but it's really how the registers are laid out: there really are reserved bits in between used reset bits. I don't think that the reserved bits are doing anything though, so the best way to proceed is to just remove them and map the dt-bindings IDs to the HW register's bits in the driver instead. Even though the current approach is very simplistic, I agree that this is not how it's supposed to be done (and I'm sort-of sad about that). Rex, please map these values in the reset driver so that, in this header, you'll get something like: #define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 #define MT8195_INFRA_RST0_DISP_PWM1_SWRST 1 #define MT8195_INFRA_RST0_MSDC3_SWRST 2 #define .... (etc) Cheers, Angelo > > Best regards, > Krzysztof
On Mon, 2022-05-02 at 16:54 +0800, AngeloGioacchino Del Regno wrote: > Il 29/04/22 23:13, Krzysztof Kozlowski ha scritto: > > On 28/04/2022 13:56, Rex-BC Chen wrote: > > > To support reset of infra_ao, add the bit definitions for MT8195. > > > The infra_ao reset includes 5 banks and 32 bits for each bank. > > > > > > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> > > > --- > > > include/dt-bindings/reset/mt8195-resets.h | 170 > > > ++++++++++++++++++++++ > > > 1 file changed, 170 insertions(+) > > > > > > diff --git a/include/dt-bindings/reset/mt8195-resets.h > > > b/include/dt-bindings/reset/mt8195-resets.h > > > index a26bccc8b957..463114014483 100644 > > > --- a/include/dt-bindings/reset/mt8195-resets.h > > > +++ b/include/dt-bindings/reset/mt8195-resets.h > > > @@ -7,6 +7,7 @@ > > > #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195 > > > #define _DT_BINDINGS_RESET_CONTROLLER_MT8195 > > > > > > +/* TOPRGU resets */ > > > #define MT8195_TOPRGU_CONN_MCU_SW_RST 0 > > > #define MT8195_TOPRGU_INFRA_GRST_SW_RST 1 > > > #define MT8195_TOPRGU_APU_SW_RST 2 > > > @@ -26,4 +27,173 @@ > > > > > > #define MT8195_TOPRGU_SW_RST_NUM 16 > > > > > > +/* INFRA RST0 */ > > > +#define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 > > > +#define MT8195_INFRA_RST0_RSV0 1 > > > +#define MT8195_INFRA_RST0_DISP_PWM1_SWRST 2 > > > +#define MT8195_INFRA_RST0_RSV1 3 > > > +#define MT8195_INFRA_RST0_MSDC3_SWRST 4 > > > +#define MT8195_INFRA_RST0_MSDC2_SWRST 5 > > > +#define MT8195_INFRA_RST0_MSDC1_SWRST 6 > > > +#define MT8195_INFRA_RST0_MSDC0_SWRST 7 > > > +#define MT8195_INFRA_RST0_RSV2 8 > > > +#define MT8195_INFRA_RST0_AP_DMA_SWRST 9 > > > +#define MT8195_INFRA_RST0_MIPI_D_SWRST 10 > > > +#define MT8195_INFRA_RST0_RSV3 11 > > > +#define MT8195_INFRA_RST0_RSV4 12 > > > +#define MT8195_INFRA_RST0_SSUSB_TOP_SWRST 13 > > > +#define MT8195_INFRA_RST0_DISP_PWM_SWRST 14 > > > +#define MT8195_INFRA_RST0_AUXADC_SWRST 15 > > > +#define MT8195_INFRA_RST0_RSV5 16 > > > +#define MT8195_INFRA_RST0_RSV6 17 > > > +#define MT8195_INFRA_RST0_RSV7 18 > > > +#define MT8195_INFRA_RST0_RSV8 19 > > > +#define MT8195_INFRA_RST0_RSV9 20 > > > +#define MT8195_INFRA_RST0_RSV10 21 > > > +#define MT8195_INFRA_RST0_RSV11 22 > > > +#define MT8195_INFRA_RST0_RSV12 23 > > > +#define MT8195_INFRA_RST0_RSV13 24 > > > +#define MT8195_INFRA_RST0_RSV14 25 > > > +#define MT8195_INFRA_RST0_RSV15 26 > > > +#define MT8195_INFRA_RST0_RSV16 27 > > > +#define MT8195_INFRA_RST0_RSV17 28 > > > +#define MT8195_INFRA_RST0_RSV18 29 > > > +#define MT8195_INFRA_RST0_RSV19 30 > > > +#define MT8195_INFRA_RST0_RSV20 31 > > > > These are not proper IDs... don't work-around usage of bits with > > fake > > reserved IDs... > > Hello Krzysztof, > > Actually, I get that it may seem that Rex is trying to cheat with > fake > reserved numbers... but it's really how the registers are laid out: > there > really are reserved bits in between used reset bits. > > I don't think that the reserved bits are doing anything though, so > the > best way to proceed is to just remove them and map the dt-bindings > IDs to > the HW register's bits in the driver instead. > Even though the current approach is very simplistic, I agree that > this is > not how it's supposed to be done (and I'm sort-of sad about that). > > Rex, please map these values in the reset driver so that, in this > header, > you'll get something like: > > #define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 > #define MT8195_INFRA_RST0_DISP_PWM1_SWRST 1 > #define MT8195_INFRA_RST0_MSDC3_SWRST 2 > #define .... (etc) > > Cheers, > Angelo > > > > > Best regards, > > Krzysztof > > Hello Krzysztof and Angelo, Thanks for your advice and review. I will modify my driver using index and I will just add some reset we curreently use. reset.h will list like this: #define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 #define MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST 1 #define MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST 2 For this, I will add a new mode for input argument because we alos need to be compatible with previous reset drivers. For input argument with different mode: enum MTK_RST_CTRL_MODE { MTK_RST_CTRL_BIT_MODE = 0, MTK_RST_CTRL_INDEX_MODE, }; If register MTK_RST_CTRL_INDEX_MODE for reset controller, I will implent new xlate function to transfer the index to offsets. BRs, Rex
diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h index a26bccc8b957..463114014483 100644 --- a/include/dt-bindings/reset/mt8195-resets.h +++ b/include/dt-bindings/reset/mt8195-resets.h @@ -7,6 +7,7 @@ #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195 #define _DT_BINDINGS_RESET_CONTROLLER_MT8195 +/* TOPRGU resets */ #define MT8195_TOPRGU_CONN_MCU_SW_RST 0 #define MT8195_TOPRGU_INFRA_GRST_SW_RST 1 #define MT8195_TOPRGU_APU_SW_RST 2 @@ -26,4 +27,173 @@ #define MT8195_TOPRGU_SW_RST_NUM 16 +/* INFRA RST0 */ +#define MT8195_INFRA_RST0_THERM_CTRL_SWRST 0 +#define MT8195_INFRA_RST0_RSV0 1 +#define MT8195_INFRA_RST0_DISP_PWM1_SWRST 2 +#define MT8195_INFRA_RST0_RSV1 3 +#define MT8195_INFRA_RST0_MSDC3_SWRST 4 +#define MT8195_INFRA_RST0_MSDC2_SWRST 5 +#define MT8195_INFRA_RST0_MSDC1_SWRST 6 +#define MT8195_INFRA_RST0_MSDC0_SWRST 7 +#define MT8195_INFRA_RST0_RSV2 8 +#define MT8195_INFRA_RST0_AP_DMA_SWRST 9 +#define MT8195_INFRA_RST0_MIPI_D_SWRST 10 +#define MT8195_INFRA_RST0_RSV3 11 +#define MT8195_INFRA_RST0_RSV4 12 +#define MT8195_INFRA_RST0_SSUSB_TOP_SWRST 13 +#define MT8195_INFRA_RST0_DISP_PWM_SWRST 14 +#define MT8195_INFRA_RST0_AUXADC_SWRST 15 +#define MT8195_INFRA_RST0_RSV5 16 +#define MT8195_INFRA_RST0_RSV6 17 +#define MT8195_INFRA_RST0_RSV7 18 +#define MT8195_INFRA_RST0_RSV8 19 +#define MT8195_INFRA_RST0_RSV9 20 +#define MT8195_INFRA_RST0_RSV10 21 +#define MT8195_INFRA_RST0_RSV11 22 +#define MT8195_INFRA_RST0_RSV12 23 +#define MT8195_INFRA_RST0_RSV13 24 +#define MT8195_INFRA_RST0_RSV14 25 +#define MT8195_INFRA_RST0_RSV15 26 +#define MT8195_INFRA_RST0_RSV16 27 +#define MT8195_INFRA_RST0_RSV17 28 +#define MT8195_INFRA_RST0_RSV18 29 +#define MT8195_INFRA_RST0_RSV19 30 +#define MT8195_INFRA_RST0_RSV20 31 + +/* INFRA RST1 */ +#define MT8195_INFRA_RST1_IRTX_SWRST 32 +#define MT8195_INFRA_RST1_SPI0_SWRST 33 +#define MT8195_INFRA_RST1_I2C0_SWRST 34 +#define MT8195_INFRA_RST1_RSV0 35 +#define MT8195_INFRA_RST1_RSV1 36 +#define MT8195_INFRA_RST1_RSV2 37 +#define MT8195_INFRA_RST1_UART0_SWRST 38 +#define MT8195_INFRA_RST1_UART1_SWRST 39 +#define MT8195_INFRA_RST1_UART2_SWRST 40 +#define MT8195_INFRA_RST1_RSV3 41 +#define MT8195_INFRA_RST1_SPI1_SWRST 42 +#define MT8195_INFRA_RST1_RSV4 43 +#define MT8195_INFRA_RST1_RSV5 44 +#define MT8195_INFRA_RST1_SPI2_SWRST 45 +#define MT8195_INFRA_RST1_SPI3_SWRST 46 +#define MT8195_INFRA_RST1_UFSHCI_SWRST 47 +#define MT8195_INFRA_RST1_RSV6 48 +#define MT8195_INFRA_RST1_RSV7 49 +#define MT8195_INFRA_RST1_RSV8 50 +#define MT8195_INFRA_RST1_RSV9 51 +#define MT8195_INFRA_RST1_RSV10 52 +#define MT8195_INFRA_RST1_RSV11 53 +#define MT8195_INFRA_RST1_RSV12 54 +#define MT8195_INFRA_RST1_RSV13 55 +#define MT8195_INFRA_RST1_RSV14 56 +#define MT8195_INFRA_RST1_RSV15 57 +#define MT8195_INFRA_RST1_RSV16 58 +#define MT8195_INFRA_RST1_RSV17 59 +#define MT8195_INFRA_RST1_RSV18 60 +#define MT8195_INFRA_RST1_RSV19 61 +#define MT8195_INFRA_RST1_RSV20 62 +#define MT8195_INFRA_RST1_RSV21 63 + +/* INFRA RST2 */ +#define MT8195_INFRA_RST2_PMIF_SPI_SWRST 64 +#define MT8195_INFRA_RST2_SPM_SWRST 65 +#define MT8195_INFRA_RST2_USBSIF_SWRST 66 +#define MT8195_INFRA_RST2_RSV0 67 +#define MT8195_INFRA_RST2_KP_SWRST 68 +#define MT8195_INFRA_RST2_APXGPT_SWRST 69 +#define MT8195_INFRA_RST2_RSV1 70 +#define MT8195_INFRA_RST2_UNIPRO_UFS_AO_SWRST 71 +#define MT8195_INFRA_RST2_DX_CC_AO_SWRST 72 +#define MT8195_INFRA_RST2_UFSPHY_AO_SWRST 73 +#define MT8195_INFRA_RST2_RSV2 74 +#define MT8195_INFRA_RST2_INFRACFG_AO_MEM_SWRST 75 +#define MT8195_INFRA_RST2_PWM_AO_SWRST 76 +#define MT8195_INFRA_RST2_TIA_AO_SWRST 77 +#define MT8195_INFRA_RST2_PMIF_SPMI_SWRST 78 +#define MT8195_INFRA_RST2_SSUSB_TOP_P1_SWRST 79 +#define MT8195_INFRA_RST2_SSUSB_TOP_P2_SWRST 80 +#define MT8195_INFRA_RST2_SSUSB_TOP_P3_SWRST 81 +#define MT8195_INFRA_RST2_USBSIF_P1_SWRST 82 +#define MT8195_INFRA_RST2_USBSIF_P2_SWRST 83 +#define MT8195_INFRA_RST2_USBSIF_P3_SWRST 84 +#define MT8195_INFRA_RST2_RX_HDMI_SCDC_AO_SWRST 85 +#define MT8195_INFRA_RST2_EDID_TOP_SWRST 86 +#define MT8195_INFRA_RST2_CEC_AO_SWRST 87 +#define MT8195_INFRA_RST2_IRRX_AO_SWRST 88 +#define MT8195_INFRA_RST2_ETHERNET_QOS_SWRST 89 +#define MT8195_INFRA_RST2_PCIE_P0_SWRST 90 +#define MT8195_INFRA_RST2_PCIE_P1_SWRST 91 +#define MT8195_INFRA_RST2_RSV3 92 +#define MT8195_INFRA_RST2_RSV4 93 +#define MT8195_INFRA_RST2_RSV5 94 +#define MT8195_INFRA_RST2_RSV6 95 + +/* INFRA RST3 */ +#define MT8195_INFRA_RST3_RSV0 96 +#define MT8195_INFRA_RST3_GCE_SWRST 97 +#define MT8195_INFRA_RST3_RSV1 98 +#define MT8195_INFRA_RST3_RSV2 99 +#define MT8195_INFRA_RST3_RSV3 100 +#define MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST 101 +#define MT8195_INFRA_RST3_RSV4 102 +#define MT8195_INFRA_RST3_RSV5 103 +#define MT8195_INFRA_RST3_RSV6 104 +#define MT8195_INFRA_RST3_RSV7 105 +#define MT8195_INFRA_RST3_RSV8 106 +#define MT8195_INFRA_RST3_RSV9 107 +#define MT8195_INFRA_RST3_RSV10 108 +#define MT8195_INFRA_RST3_TRNG_SWRST 109 +#define MT8195_INFRA_RST3_ECC_SWRST 110 +#define MT8195_INFRA_RST3_GCPU_SWRST 111 +#define MT8195_INFRA_RST3_SPI4_SWRST 112 +#define MT8195_INFRA_RST3_SPI5_SWRST 113 +#define MT8195_INFRA_RST3_INFRA2MFGAXI_GALS_IN_SWRST 114 +#define MT8195_INFRA_RST3_MFGAXI2INFRA_M0_GALS_OUT_SWRST 115 +#define MT8195_INFRA_RST3_MFGAXI2INFRA_M1_GALS_OUT_SWRST 116 +#define MT8195_INFRA_RST3_UFS_AES_SWRST 117 +#define MT8195_INFRA_RST3_RSV11 118 +#define MT8195_INFRA_RST3_RSV12 119 +#define MT8195_INFRA_RST3_RSV13 120 +#define MT8195_INFRA_RST3_CCU_GALS_SWRST 121 +#define MT8195_INFRA_RST3_RSV14 122 +#define MT8195_INFRA_RST3_RSV15 123 +#define MT8195_INFRA_RST3_INFRA2NNA1_SWRST 124 +#define MT8195_INFRA_RST3_INFRA2NNA0_SWRST 125 +#define MT8195_INFRA_RST3_RSV16 126 +#define MT8195_INFRA_RST3_RSV17 127 + +/* INFRA RST4 */ +#define MT8195_INFRA_RST4_RSV0 128 +#define MT8195_INFRA_RST4_RSV1 129 +#define MT8195_INFRA_RST4_FLASHIF_SWRST 130 +#define MT8195_INFRA_RST4_NFI_SWRST 131 +#define MT8195_INFRA_RST4_APU0_CBIP_GALS_S_SWRST 132 +#define MT8195_INFRA_RST4_APU1_CBIP_GALS_S_SWRST 133 +#define MT8195_INFRA_RST4_INFRA2MMSRAM_GALS_M_SWRST 134 +#define MT8195_INFRA_RST4_RSV2 135 +#define MT8195_INFRA_RST4_SPIS0_SWRST 136 +#define MT8195_INFRA_RST4_THERM_CTRL_PTP_MCU_SWRST 137 +#define MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST 138 +#define MT8195_INFRA_RST4_RSV3 139 +#define MT8195_INFRA_RST4_RSV4 140 +#define MT8195_INFRA_RST4_RSV5 141 +#define MT8195_INFRA_RST4_RSV6 142 +#define MT8195_INFRA_RST4_SPIS1_SWRST 143 +#define MT8195_INFRA_RST4_INFRA2APU_APB_TX_SWRST 144 +#define MT8195_INFRA_RST4_APU2INFRA_APB_RX_SWRST 145 +#define MT8195_INFRA_RST4_INFRA2DRAMC_APB_TX_SWRST 146 +#define MT8195_INFRA_RST4_INFRA2SUBINFRA_APB_TX_SWRST 147 +#define MT8195_INFRA_RST4_GCE1_SWRST 148 +#define MT8195_INFRA_RST4_RSV7 149 +#define MT8195_INFRA_RST4_RSV8 150 +#define MT8195_INFRA_RST4_RSV9 151 +#define MT8195_INFRA_RST4_UART3_SWRST 152 +#define MT8195_INFRA_RST4_UART4_SWRST 153 +#define MT8195_INFRA_RST4_UART5_SWRST 154 +#define MT8195_INFRA_RST4_I2S_DMA_SWRST 155 +#define MT8195_INFRA_RST4_INFRA2NNA_APB_TX_SWRST 156 +#define MT8195_INFRA_RST4_NNA0AXI2INFRA_GALS_S_SWRST 157 +#define MT8195_INFRA_RST4_NNA1AXI2INFRA_GALS_S_SWRST 158 + #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8195 */
To support reset of infra_ao, add the bit definitions for MT8195. The infra_ao reset includes 5 banks and 32 bits for each bank. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> --- include/dt-bindings/reset/mt8195-resets.h | 170 ++++++++++++++++++++++ 1 file changed, 170 insertions(+)