deleted file mode 100644
@@ -1,53 +0,0 @@
-Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
-
-Reference
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] https://www.ti.com/product/cdce913
-[3] https://www.ti.com/product/cdce925
-[4] https://www.ti.com/product/cdce937
-[5] https://www.ti.com/product/cdce949
-
-The driver provides clock sources for each output Y1 through Y5.
-
-Required properties:
- - compatible: Shall be one of the following:
- - "ti,cdce913": 1-PLL, 3 Outputs
- - "ti,cdce925": 2-PLL, 5 Outputs
- - "ti,cdce937": 3-PLL, 7 Outputs
- - "ti,cdce949": 4-PLL, 9 Outputs
- - reg: I2C device address.
- - clocks: Points to a fixed parent clock that provides the input frequency.
- - #clock-cells: From common clock bindings: Shall be 1.
-
-Optional properties:
- - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
- board, or to compensate for external influences.
-- vdd-supply: A regulator node for Vdd
-- vddout-supply: A regulator node for Vddout
-
-For all PLL1, PLL2, ... an optional child node can be used to specify spread
-spectrum clocking parameters for a board.
- - spread-spectrum: SSC mode as defined in the data sheet.
- - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
- present, the clock runs at the requested frequency on average. Otherwise
- the requested frequency is the maximum value of the SCC range.
-
-
-Example:
-
- clockgen: cdce925pw@64 {
- compatible = "cdce925";
- reg = <0x64>;
- clocks = <&xtal_27Mhz>;
- #clock-cells = <1>;
- xtal-load-pf = <5>;
- vdd-supply = <&1v8-reg>;
- vddout-supply = <&3v3-reg>;
- /* PLL options to get SSC 1% centered */
- PLL2 {
- spread-spectrum = <4>;
- spread-spectrum-center;
- };
- };
new file mode 100644
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+ - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+ Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+ - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+ - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+ - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+ - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+ compatible:
+ enum:
+ - ti,cdce913
+ - ti,cdce925
+ - ti,cdce937
+ - ti,cdce949
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: fixed parent clock
+
+ "#clock-cells":
+ const: 1
+
+ vdd-supply:
+ description: Regulator that provides 1.8V Vdd power supply
+
+ vddout-supply:
+ description: |
+ Regulator that provides Vddout power supply.
+ non-L variant: 2.5V or 3.3V for
+ L variant: 1.8V for
+
+ xtal-load-pf:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Crystal load-capacitor value to fine-tune performance on a
+ board, or to compensate for external influences.
+
+patternProperties:
+ "^PLL[1-4]$":
+ type: object
+ description: |
+ optional child node can be used to specify spread
+ spectrum clocking parameters for a board
+
+ additionalProperties: false
+
+ properties:
+ spread-spectrum:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: SSC mode as defined in the data sheet
+
+ spread-spectrum-center:
+ type: boolean
+ description: |
+ Use "centered" mode instead of "max" mode. When
+ present, the clock runs at the requested frequency on average.
+ Otherwise the requested frequency is the maximum value of the
+ SCC range.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cdce925: clock-controller@64 {
+ compatible = "ti,cdce925";
+ reg = <0x64>;
+ clocks = <&xtal_27Mhz>;
+ #clock-cells = <1>;
+ xtal-load-pf = <5>;
+ vdd-supply = <®_1v8>;
+ vddout-supply = <®_3v3>;
+ /* PLL options to get SSC 1% centered */
+ PLL2 {
+ spread-spectrum = <4>;
+ spread-spectrum-center;
+ };
+ };
+ };
Convert the TI CDCE925 clock binding to DT schema format. Including a small fix: Add the missing 'ti' prefix in the example compatible. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- I have to admit I only have one specific addon platform for this hardware, which is actually a CECD813 tbh. Changes in v2: * Fix bindings title * Removed nodename pattern * Add 'additionalProperties: false' for PLL subnodes * Fix typo in required list * I added myself as maintainer .../devicetree/bindings/clock/ti,cdce925.txt | 53 --------- .../devicetree/bindings/clock/ti,cdce925.yaml | 103 ++++++++++++++++++ 2 files changed, 103 insertions(+), 53 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti,cdce925.txt create mode 100644 Documentation/devicetree/bindings/clock/ti,cdce925.yaml