diff mbox series

[5/5] clk: sunxi-ng: d1: Add CAN bus gates and resets

Message ID 20221126191319.6404-6-samuel@sholland.org (mailing list archive)
State Changes Requested, archived
Headers show
Series clk: sunxi-ng: Allwinner R528/T113 clock support | expand

Commit Message

Samuel Holland Nov. 26, 2022, 7:13 p.m. UTC
From: Fabien Poussin <fabien.poussin@gmail.com>

The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/clk/sunxi-ng/ccu-sun20i-d1.c      | 11 +++++++++++
 drivers/clk/sunxi-ng/ccu-sun20i-d1.h      |  2 +-
 include/dt-bindings/clock/sun20i-d1-ccu.h |  2 ++
 include/dt-bindings/reset/sun20i-d1-ccu.h |  2 ++
 4 files changed, 16 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Nov. 27, 2022, 8:51 p.m. UTC | #1
On 26/11/2022 20:13, Samuel Holland wrote:
> From: Fabien Poussin <fabien.poussin@gmail.com>
> 
> The D1 CCU contains gates and resets for two CAN buses. While the CAN
> bus controllers are only documented for the T113 SoC, the CCU is the
> same across all SoC variants.
> 
> Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> 
>  drivers/clk/sunxi-ng/ccu-sun20i-d1.c      | 11 +++++++++++
>  drivers/clk/sunxi-ng/ccu-sun20i-d1.h      |  2 +-
>  include/dt-bindings/clock/sun20i-d1-ccu.h |  2 ++
>  include/dt-bindings/reset/sun20i-d1-ccu.h |  2 ++

Don't mix bindings with driver changes. Checkpatch should complain here...

Best regards,
Krzysztof
Andre Przywara Dec. 3, 2022, 12:40 a.m. UTC | #2
On Sat, 26 Nov 2022 13:13:19 -0600
Samuel Holland <samuel@sholland.org> wrote:

Hi,

> From: Fabien Poussin <fabien.poussin@gmail.com>
> 
> The D1 CCU contains gates and resets for two CAN buses. While the CAN
> bus controllers are only documented for the T113 SoC, the CCU is the
> same across all SoC variants.

So my version of the T113 manual only barely mentions the existence of
CAN controllers, but doesn't list any details, not even a base address
or those clock gates.
However I can confirm that the two lowest bits are implemented in
+0x92c. I also verified that the bits and numbers below match up.

> Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
> 
>  drivers/clk/sunxi-ng/ccu-sun20i-d1.c      | 11 +++++++++++
>  drivers/clk/sunxi-ng/ccu-sun20i-d1.h      |  2 +-
>  include/dt-bindings/clock/sun20i-d1-ccu.h |  2 ++
>  include/dt-bindings/reset/sun20i-d1-ccu.h |  2 ++
>  4 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> index c5a7df93602c..48a8fb2c43b7 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> @@ -469,6 +469,11 @@ static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws,
>  static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws,
>  			  0x91c, BIT(3), 0);
>  
> +static SUNXI_CCU_GATE_HWS(bus_can0_clk, "bus-can0", apb1_hws,
> +			  0x92c, BIT(0), 0);
> +static SUNXI_CCU_GATE_HWS(bus_can1_clk, "bus-can1", apb1_hws,
> +			  0x92c, BIT(1), 0);
> +
>  static const struct clk_parent_data spi_parents[] = {
>  	{ .fw_name = "hosc" },
>  	{ .hw = &pll_periph0_clk.hw },
> @@ -997,6 +1002,8 @@ static struct ccu_common *sun20i_d1_ccu_clks[] = {
>  	&bus_i2c1_clk.common,
>  	&bus_i2c2_clk.common,
>  	&bus_i2c3_clk.common,
> +	&bus_can0_clk.common,
> +	&bus_can1_clk.common,
>  	&spi0_clk.common,
>  	&spi1_clk.common,
>  	&bus_spi0_clk.common,
> @@ -1147,6 +1154,8 @@ static struct clk_hw_onecell_data sun20i_d1_hw_clks = {
>  		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
>  		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
>  		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
> +		[CLK_BUS_CAN0]		= &bus_can0_clk.common.hw,
> +		[CLK_BUS_CAN1]		= &bus_can1_clk.common.hw,
>  		[CLK_SPI0]		= &spi0_clk.common.hw,
>  		[CLK_SPI1]		= &spi1_clk.common.hw,
>  		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
> @@ -1252,6 +1261,8 @@ static struct ccu_reset_map sun20i_d1_ccu_resets[] = {
>  	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
>  	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
>  	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
> +	[RST_BUS_CAN0]		= { 0x92c, BIT(16) },
> +	[RST_BUS_CAN1]		= { 0x92c, BIT(17) },
>  	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
>  	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
>  	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
> diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> index e303176f0d4e..b14da36e2537 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> @@ -10,6 +10,6 @@
>  #include <dt-bindings/clock/sun20i-d1-ccu.h>
>  #include <dt-bindings/reset/sun20i-d1-ccu.h>
>  
> -#define CLK_NUMBER		(CLK_FANOUT2 + 1)
> +#define CLK_NUMBER		(CLK_BUS_CAN1 + 1)
>  
>  #endif /* _CCU_SUN20I_D1_H_ */
> diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h
> index e3ac53315e1a..e143b9929763 100644
> --- a/include/dt-bindings/clock/sun20i-d1-ccu.h
> +++ b/include/dt-bindings/clock/sun20i-d1-ccu.h
> @@ -152,5 +152,7 @@
>  #define CLK_FANOUT0		142
>  #define CLK_FANOUT1		143
>  #define CLK_FANOUT2		144
> +#define CLK_BUS_CAN0		145
> +#define CLK_BUS_CAN1		146
>  
>  #endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
> diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h
> index de9ff5203239..f8001cf50bf1 100644
> --- a/include/dt-bindings/reset/sun20i-d1-ccu.h
> +++ b/include/dt-bindings/reset/sun20i-d1-ccu.h
> @@ -73,5 +73,7 @@
>  #define RST_BUS_DSP_CFG		63
>  #define RST_BUS_DSP_DBG		64
>  #define RST_BUS_RISCV_CFG	65
> +#define RST_BUS_CAN0		66
> +#define RST_BUS_CAN1		67
>  
>  #endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */
diff mbox series

Patch

diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
index c5a7df93602c..48a8fb2c43b7 100644
--- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
+++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
@@ -469,6 +469,11 @@  static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws,
 static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws,
 			  0x91c, BIT(3), 0);
 
+static SUNXI_CCU_GATE_HWS(bus_can0_clk, "bus-can0", apb1_hws,
+			  0x92c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_can1_clk, "bus-can1", apb1_hws,
+			  0x92c, BIT(1), 0);
+
 static const struct clk_parent_data spi_parents[] = {
 	{ .fw_name = "hosc" },
 	{ .hw = &pll_periph0_clk.hw },
@@ -997,6 +1002,8 @@  static struct ccu_common *sun20i_d1_ccu_clks[] = {
 	&bus_i2c1_clk.common,
 	&bus_i2c2_clk.common,
 	&bus_i2c3_clk.common,
+	&bus_can0_clk.common,
+	&bus_can1_clk.common,
 	&spi0_clk.common,
 	&spi1_clk.common,
 	&bus_spi0_clk.common,
@@ -1147,6 +1154,8 @@  static struct clk_hw_onecell_data sun20i_d1_hw_clks = {
 		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
 		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
 		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_CAN0]		= &bus_can0_clk.common.hw,
+		[CLK_BUS_CAN1]		= &bus_can1_clk.common.hw,
 		[CLK_SPI0]		= &spi0_clk.common.hw,
 		[CLK_SPI1]		= &spi1_clk.common.hw,
 		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
@@ -1252,6 +1261,8 @@  static struct ccu_reset_map sun20i_d1_ccu_resets[] = {
 	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
 	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
 	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_CAN0]		= { 0x92c, BIT(16) },
+	[RST_BUS_CAN1]		= { 0x92c, BIT(17) },
 	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
 	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
 	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
index e303176f0d4e..b14da36e2537 100644
--- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
+++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
@@ -10,6 +10,6 @@ 
 #include <dt-bindings/clock/sun20i-d1-ccu.h>
 #include <dt-bindings/reset/sun20i-d1-ccu.h>
 
-#define CLK_NUMBER		(CLK_FANOUT2 + 1)
+#define CLK_NUMBER		(CLK_BUS_CAN1 + 1)
 
 #endif /* _CCU_SUN20I_D1_H_ */
diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h
index e3ac53315e1a..e143b9929763 100644
--- a/include/dt-bindings/clock/sun20i-d1-ccu.h
+++ b/include/dt-bindings/clock/sun20i-d1-ccu.h
@@ -152,5 +152,7 @@ 
 #define CLK_FANOUT0		142
 #define CLK_FANOUT1		143
 #define CLK_FANOUT2		144
+#define CLK_BUS_CAN0		145
+#define CLK_BUS_CAN1		146
 
 #endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h
index de9ff5203239..f8001cf50bf1 100644
--- a/include/dt-bindings/reset/sun20i-d1-ccu.h
+++ b/include/dt-bindings/reset/sun20i-d1-ccu.h
@@ -73,5 +73,7 @@ 
 #define RST_BUS_DSP_CFG		63
 #define RST_BUS_DSP_DBG		64
 #define RST_BUS_RISCV_CFG	65
+#define RST_BUS_CAN0		66
+#define RST_BUS_CAN1		67
 
 #endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */