diff mbox series

[v14,1/1] clk: npcm8xx: add clock controller

Message ID 20221211204324.169991-2-tmaimon77@gmail.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Introduce Nuvoton Arbel NPCM8XX BMC SoC | expand

Commit Message

Tomer Maimon Dec. 11, 2022, 8:43 p.m. UTC
Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
generates and supplies clocks to all modules within the BMC.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 drivers/clk/Kconfig       |   8 +
 drivers/clk/Makefile      |   1 +
 drivers/clk/clk-npcm8xx.c | 650 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 659 insertions(+)
 create mode 100644 drivers/clk/clk-npcm8xx.c

Comments

Stephen Boyd Dec. 16, 2022, 6:44 p.m. UTC | #1
Quoting Tomer Maimon (2022-12-11 12:43:24)
> diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> new file mode 100644
> index 000000000000..08ee7bea6f3a
> --- /dev/null
> +++ b/drivers/clk/clk-npcm8xx.c
> @@ -0,0 +1,650 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
[...]
> +#define NPCM8XX_CLK_S_RCP        "rcp"
> +
> +static const u32 pll_mux_table[] = { 0, 1, 2, 3 };
> +static const struct clk_parent_data pll_mux_parents[] = {
> +       { .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },

As this is a new driver either you should only have .fw_name here. The
.name field is a backup to migrate code over to a new binding. When
.fw_name is used there should be an associated DT binding update. I
doubt the usage of .fw_name is correct though, because aren't these clks
internal to the controller? The .fw_name field is about describing
parents that are an input to the clk controller node in DT (because the
controller is a consumer of these clks that are external to the device).

So can you use the .hw field for these internal clks? Check out
CLK_HW_INIT_HWS() macro and friends for a possible way to initialize
this.

> +       { .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
> +       { .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },

Maybe this is external? If so, it would be great to have this in the
binding as a `clocks` property.
Tomer Maimon Jan. 17, 2023, 5:35 p.m. UTC | #2
Hi Stephen,

Very sorry for the late reply.

On Fri, 16 Dec 2022 at 20:44, Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Tomer Maimon (2022-12-11 12:43:24)
> > diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> > new file mode 100644
> > index 000000000000..08ee7bea6f3a
> > --- /dev/null
> > +++ b/drivers/clk/clk-npcm8xx.c
> > @@ -0,0 +1,650 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> [...]
> > +#define NPCM8XX_CLK_S_RCP        "rcp"
> > +
> > +static const u32 pll_mux_table[] = { 0, 1, 2, 3 };
> > +static const struct clk_parent_data pll_mux_parents[] = {
> > +       { .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
>
> As this is a new driver either you should only have .fw_name here. The
> .name field is a backup to migrate code over to a new binding. When
> .fw_name is used there should be an associated DT binding update. I
What do you mean by associated DT binding? does the.fw_name, for
example, NPCM8XX_CLK_S_PLL0 need to represent in the device tree?
> doubt the usage of .fw_name is correct though, because aren't these clks
> internal to the controller? The .fw_name field is about describing does the
yes the PLL clocks are internal.
> parents that are an input to the clk controller node in DT (because the
> controller is a consumer of these clks that are external to the device).
>
> So can you use the .hw field for these internal clks? Check out
> CLK_HW_INIT_HWS() macro and friends for a possible way to initialize
> this.
but still, I have used devm_clk_hw_register_mux_parent_data_table
function to register the clock mux,
should I use  devm_clk_hw_register_mux_parent_hws function instead?
Does this modification need to be done in all the mux parent struct?
could you point me to some example in the Linux kernel how do you
think that I should represent the mux clock in the NPCM8XX clock
driver?
>
> > +       { .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
> > +       { .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
>
> Maybe this is external? If so, it would be great to have this in the
> binding as a `clocks` property.
O.K.

Thanks,

Tomer
Tomer Maimon Jan. 25, 2023, 4:18 p.m. UTC | #3
Hi Stephen,

Kind reminder regarding the NPCM clock questions

Thanks,

Tomer

On Tue, 17 Jan 2023 at 19:35, Tomer Maimon <tmaimon77@gmail.com> wrote:
>
> Hi Stephen,
>
> Very sorry for the late reply.
>
> On Fri, 16 Dec 2022 at 20:44, Stephen Boyd <sboyd@kernel.org> wrote:
> >
> > Quoting Tomer Maimon (2022-12-11 12:43:24)
> > > diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> > > new file mode 100644
> > > index 000000000000..08ee7bea6f3a
> > > --- /dev/null
> > > +++ b/drivers/clk/clk-npcm8xx.c
> > > @@ -0,0 +1,650 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > [...]
> > > +#define NPCM8XX_CLK_S_RCP        "rcp"
> > > +
> > > +static const u32 pll_mux_table[] = { 0, 1, 2, 3 };
> > > +static const struct clk_parent_data pll_mux_parents[] = {
> > > +       { .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
> >
> > As this is a new driver either you should only have .fw_name here. The
> > .name field is a backup to migrate code over to a new binding. When
> > .fw_name is used there should be an associated DT binding update. I
> What do you mean by associated DT binding? does the.fw_name, for
> example, NPCM8XX_CLK_S_PLL0 need to represent in the device tree?
> > doubt the usage of .fw_name is correct though, because aren't these clks
> > internal to the controller? The .fw_name field is about describing does the
> yes the PLL clocks are internal.
> > parents that are an input to the clk controller node in DT (because the
> > controller is a consumer of these clks that are external to the device).
> >
> > So can you use the .hw field for these internal clks? Check out
> > CLK_HW_INIT_HWS() macro and friends for a possible way to initialize
> > this.
> but still, I have used devm_clk_hw_register_mux_parent_data_table
> function to register the clock mux,
> should I use  devm_clk_hw_register_mux_parent_hws function instead?
> Does this modification need to be done in all the mux parent struct?
> could you point me to some example in the Linux kernel how do you
> think that I should represent the mux clock in the NPCM8XX clock
> driver?
> >
> > > +       { .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
> > > +       { .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
> >
> > Maybe this is external? If so, it would be great to have this in the
> > binding as a `clocks` property.
> O.K.
>
> Thanks,
>
> Tomer
Stephen Boyd Jan. 26, 2023, 2:41 a.m. UTC | #4
Quoting Tomer Maimon (2023-01-17 09:35:33)
> Hi Stephen,
> 
> Very sorry for the late reply.
> 
> On Fri, 16 Dec 2022 at 20:44, Stephen Boyd <sboyd@kernel.org> wrote:
> >
> > Quoting Tomer Maimon (2022-12-11 12:43:24)
> > > diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> > > new file mode 100644
> > > index 000000000000..08ee7bea6f3a
> > > --- /dev/null
> > > +++ b/drivers/clk/clk-npcm8xx.c
> > > @@ -0,0 +1,650 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > [...]
> > > +#define NPCM8XX_CLK_S_RCP        "rcp"
> > > +
> > > +static const u32 pll_mux_table[] = { 0, 1, 2, 3 };
> > > +static const struct clk_parent_data pll_mux_parents[] = {
> > > +       { .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
> >
> > As this is a new driver either you should only have .fw_name here. The
> > .name field is a backup to migrate code over to a new binding. When
> > .fw_name is used there should be an associated DT binding update. I
> What do you mean by associated DT binding? does the.fw_name, for
> example, NPCM8XX_CLK_S_PLL0 need to represent in the device tree?

Yes it should match a string in the "clock-names" property for this clk
provider's device node.

> > doubt the usage of .fw_name is correct though, because aren't these clks
> > internal to the controller? The .fw_name field is about describing does the
> yes the PLL clocks are internal.

Ok.

> > parents that are an input to the clk controller node in DT (because the
> > controller is a consumer of these clks that are external to the device).
> >
> > So can you use the .hw field for these internal clks? Check out
> > CLK_HW_INIT_HWS() macro and friends for a possible way to initialize
> > this.
> but still, I have used devm_clk_hw_register_mux_parent_data_table
> function to register the clock mux,
> should I use  devm_clk_hw_register_mux_parent_hws function instead?

Probably, yes.

> Does this modification need to be done in all the mux parent struct?
> could you point me to some example in the Linux kernel how do you
> think that I should represent the mux clock in the NPCM8XX clock
> driver?

I don't know. If the clk is external to the provider, then it should be
in .fw_name or .index and be provided through DT. Otherwise, if the clk
is internal to the clk provider use direct pointers.

> >
> > > +       { .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
> > > +       { .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
> >
> > Maybe this is external? If so, it would be great to have this in the
> > binding as a `clocks` property.
> O.K.
> 

Is it external? If so, then fw_name would be correct. You can look at
the kernel-doc above clk_core_get(), but I really just need to spend a
few hours and write a proper kernel-doc for this stuff.
diff mbox series

Patch

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index d79905f3e174..0a8aad45e2a7 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -326,6 +326,14 @@  config COMMON_CLK_LOCHNAGAR
 	  This driver supports the clocking features of the Cirrus Logic
 	  Lochnagar audio development board.
 
+config COMMON_CLK_NPCM8XX
+	tristate "Clock driver for the NPCM8XX SoC Family"
+	depends on ARCH_NPCM || COMPILE_TEST
+	help
+	  This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family,
+	  all the clocks are initialized by the bootloader, so this driver
+	  allows only reading of current settings directly from the hardware.
+
 config COMMON_CLK_NXP
 	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 	select REGMAP_MMIO if ARCH_LPC32XX
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..cae295de5459 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,6 +49,7 @@  obj-$(CONFIG_ARCH_MILBEAUT_M10V)	+= clk-milbeaut.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-npcm7xx.o
+obj-$(CONFIG_COMMON_CLK_NPCM8XX)	+= clk-npcm8xx.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
 obj-$(CONFIG_COMMON_CLK_OXNAS)		+= clk-oxnas.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
new file mode 100644
index 000000000000..08ee7bea6f3a
--- /dev/null
+++ b/drivers/clk/clk-npcm8xx.c
@@ -0,0 +1,650 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NPCM8xx Clock Generator
+ * All the clocks are initialized by the bootloader, so this driver allow only
+ * reading of current settings directly from the hardware.
+ *
+ * Copyright (C) 2020 Nuvoton Technologies
+ * Author: Tomer Maimon <tomer.maimon@nuvoton.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+
+#define NPCM8XX_REF_CLK		25000000
+
+struct npcm8xx_clk_pll_data {
+	unsigned int	id;
+	const char	*name;
+	u32		reg;
+	unsigned long	flags;
+};
+
+struct npcm8xx_clk_pll {
+	struct clk_hw hw;
+	void __iomem *pllcon;
+	struct npcm8xx_clk_pll_data pll;
+	struct clk_init_data init;
+};
+
+#define to_npcm8xx_clk_pll(_hw) container_of(_hw, struct npcm8xx_clk_pll, hw)
+
+#define PLLCON_LOKI	BIT(31)
+#define PLLCON_LOKS	BIT(30)
+#define PLLCON_FBDV	GENMASK(27, 16)
+#define PLLCON_OTDV2	GENMASK(15, 13)
+#define PLLCON_PWDEN	BIT(12)
+#define PLLCON_OTDV1	GENMASK(10, 8)
+#define PLLCON_INDV	GENMASK(5, 0)
+
+static unsigned long npcm8xx_clk_pll_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct npcm8xx_clk_pll *pll = to_npcm8xx_clk_pll(hw);
+	unsigned long fbdv, indv, otdv1, otdv2;
+	unsigned int val;
+	u64 ret;
+
+	if (parent_rate == 0) {
+		pr_debug("%s: parent rate is zero\n", __func__);
+		return 0;
+	}
+
+	val = readl_relaxed(pll->pllcon + pll->pll.reg);
+
+	indv = FIELD_GET(PLLCON_INDV, val);
+	fbdv = FIELD_GET(PLLCON_FBDV, val);
+	otdv1 = FIELD_GET(PLLCON_OTDV1, val);
+	otdv2 = FIELD_GET(PLLCON_OTDV2, val);
+
+	ret = (u64)parent_rate * fbdv;
+	do_div(ret, indv * otdv1 * otdv2);
+
+	return ret;
+}
+
+static const struct clk_ops npcm8xx_clk_pll_ops = {
+	.recalc_rate = npcm8xx_clk_pll_recalc_rate,
+};
+
+static struct clk_hw *
+npcm8xx_clk_register_pll(struct device *dev, struct npcm8xx_clk_pll *pll,
+			 void __iomem *sys_base)
+{
+	struct clk_hw *hw;
+	int ret;
+
+	pll->pllcon = sys_base;
+	hw = &pll->hw;
+
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return hw;
+}
+
+#define NPCM8XX_CLKEN1          (0x00)
+#define NPCM8XX_CLKEN2          (0x28)
+#define NPCM8XX_CLKEN3          (0x30)
+#define NPCM8XX_CLKEN4          (0x70)
+#define NPCM8XX_CLKSEL          (0x04)
+#define NPCM8XX_CLKDIV1         (0x08)
+#define NPCM8XX_CLKDIV2         (0x2C)
+#define NPCM8XX_CLKDIV3         (0x58)
+#define NPCM8XX_CLKDIV4         (0x7C)
+#define NPCM8XX_PLLCON0         (0x0C)
+#define NPCM8XX_PLLCON1         (0x10)
+#define NPCM8XX_PLLCON2         (0x54)
+#define NPCM8XX_SWRSTR          (0x14)
+#define NPCM8XX_IRQWAKECON      (0x18)
+#define NPCM8XX_IRQWAKEFLAG     (0x1C)
+#define NPCM8XX_IPSRST1         (0x20)
+#define NPCM8XX_IPSRST2         (0x24)
+#define NPCM8XX_IPSRST3         (0x34)
+#define NPCM8XX_WD0RCR          (0x38)
+#define NPCM8XX_WD1RCR          (0x3C)
+#define NPCM8XX_WD2RCR          (0x40)
+#define NPCM8XX_SWRSTC1         (0x44)
+#define NPCM8XX_SWRSTC2         (0x48)
+#define NPCM8XX_SWRSTC3         (0x4C)
+#define NPCM8XX_SWRSTC4         (0x50)
+#define NPCM8XX_CORSTC          (0x5C)
+#define NPCM8XX_PLLCONG         (0x60)
+#define NPCM8XX_AHBCKFI         (0x64)
+#define NPCM8XX_SECCNT          (0x68)
+#define NPCM8XX_CNTR25M         (0x6C)
+#define NPCM8XX_THRTL_CNT       (0xC0)
+
+struct npcm8xx_clk_mux_data {
+	u8 shift;
+	u32 mask;
+	const u32 *table;
+	const char *name;
+	const struct clk_parent_data *parent_data;
+	u8 num_parents;
+	unsigned long flags;
+	/*
+	 * If this clock is exported via DT, set onecell_idx to constant
+	 * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+	 * this specific clock.  Otherwise, set to -1.
+	 */
+	int onecell_idx;
+};
+
+struct npcm8xx_clk_div_data {
+	u32 reg;
+	u8 shift;
+	u8 width;
+	const char *name;
+	const struct clk_parent_data *parent_data;
+	u8 clk_divider_flags;
+	unsigned long flags;
+	/*
+	 * If this clock is exported via DT, set onecell_idx to constant
+	 * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+	 * this specific clock.  Otherwise, set to -1.
+	 */
+	int onecell_idx;
+};
+
+/*
+ * Single copy of strings used to refer to clocks within this driver indexed by
+ * above enum.
+ */
+#define NPCM8XX_CLK_S_REFCLK      "refclk"
+#define NPCM8XX_CLK_S_SYSBYPCK    "sysbypck"
+#define NPCM8XX_CLK_S_MCBYPCK     "mcbypck"
+#define NPCM8XX_CLK_S_PLL0        "pll0"
+#define NPCM8XX_CLK_S_PLL1        "pll1"
+#define NPCM8XX_CLK_S_PLL1_DIV2   "pll1_div2"
+#define NPCM8XX_CLK_S_PLL2        "pll2"
+#define NPCM8XX_CLK_S_PLL_GFX     "pll_gfx"
+#define NPCM8XX_CLK_S_PLL2_DIV2   "pll2_div2"
+#define NPCM8XX_CLK_S_PIX_MUX     "gfx_pixel"
+#define NPCM8XX_CLK_S_MC_MUX      "mc_phy"
+#define NPCM8XX_CLK_S_CPU_MUX     "cpu"  /* AKA system clock */
+#define NPCM8XX_CLK_S_MC          "mc"
+#define NPCM8XX_CLK_S_AXI         "axi"  /* AKA CLK2 */
+#define NPCM8XX_CLK_S_AHB         "ahb"  /* AKA CLK4 */
+#define NPCM8XX_CLK_S_CLKOUT_MUX  "clkout_mux"
+#define NPCM8XX_CLK_S_UART_MUX    "uart_mux"
+#define NPCM8XX_CLK_S_SD_MUX      "sd_mux"
+#define NPCM8XX_CLK_S_GFXM_MUX    "gfxm_mux"
+#define NPCM8XX_CLK_S_SU_MUX      "serial_usb_mux"
+#define NPCM8XX_CLK_S_DVC_MUX     "dvc_mux"
+#define NPCM8XX_CLK_S_GFX_MUX     "gfx_mux"
+#define NPCM8XX_CLK_S_ADC_MUX     "adc_mux"
+#define NPCM8XX_CLK_S_SPI0        "spi0"
+#define NPCM8XX_CLK_S_SPI1        "spi1"
+#define NPCM8XX_CLK_S_SPI3        "spi3"
+#define NPCM8XX_CLK_S_SPIX        "spix"
+#define NPCM8XX_CLK_S_APB1        "apb1"
+#define NPCM8XX_CLK_S_APB2        "apb2"
+#define NPCM8XX_CLK_S_APB3        "apb3"
+#define NPCM8XX_CLK_S_APB4        "apb4"
+#define NPCM8XX_CLK_S_APB5        "apb5"
+#define NPCM8XX_CLK_S_APB19       "apb19"
+#define NPCM8XX_CLK_S_TOCK        "tock"
+#define NPCM8XX_CLK_S_CLKOUT      "clkout"
+#define NPCM8XX_CLK_S_PRE_ADC     "pre adc"
+#define NPCM8XX_CLK_S_UART        "uart"
+#define NPCM8XX_CLK_S_UART2       "uart2"
+#define NPCM8XX_CLK_S_TIMER       "timer"
+#define NPCM8XX_CLK_S_MMC         "mmc"
+#define NPCM8XX_CLK_S_SDHC        "sdhc"
+#define NPCM8XX_CLK_S_ADC         "adc"
+#define NPCM8XX_CLK_S_GFX         "gfx0_gfx1_mem"
+#define NPCM8XX_CLK_S_USBIF       "serial_usbif"
+#define NPCM8XX_CLK_S_USB_HOST    "usb_host"
+#define NPCM8XX_CLK_S_USB_BRIDGE  "usb_bridge"
+#define NPCM8XX_CLK_S_PCI         "pci"
+#define NPCM8XX_CLK_S_TH          "th"
+#define NPCM8XX_CLK_S_ATB         "atb"
+#define NPCM8XX_CLK_S_PRE_CLK     "pre_clk"
+
+#define NPCM8XX_CLK_S_RG_MUX	  "rg_mux"
+#define NPCM8XX_CLK_S_RCP_MUX	  "rcp_mux"
+#define NPCM8XX_CLK_S_RG	  "rg"
+#define NPCM8XX_CLK_S_RCP	  "rcp"
+
+static const u32 pll_mux_table[] = { 0, 1, 2, 3 };
+static const struct clk_parent_data pll_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
+	{ .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2_DIV2, .name = NPCM8XX_CLK_S_PLL2_DIV2 }
+};
+
+static const u32 cpuck_mux_table[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data cpuck_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
+	{ .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_SYSBYPCK, .name = NPCM8XX_CLK_S_SYSBYPCK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2, .name = NPCM8XX_CLK_S_PLL2 }
+};
+
+static const u32 pixcksel_mux_table[] = { 0, 2 };
+static const struct clk_parent_data pixcksel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PLL_GFX, .name = NPCM8XX_CLK_S_PLL_GFX },
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK }
+};
+
+static const u32 sucksel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data sucksel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2_DIV2, .name = NPCM8XX_CLK_S_PLL2_DIV2 }
+};
+
+static const u32 mccksel_mux_table[] = { 0, 2, 3 };
+static const struct clk_parent_data mccksel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PLL1_DIV2, .name = NPCM8XX_CLK_S_PLL1_DIV2 },
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_MCBYPCK, .name = NPCM8XX_CLK_S_MCBYPCK }
+};
+
+static const u32 clkoutsel_mux_table[] = { 0, 1, 2, 3, 4 };
+static const struct clk_parent_data clkoutsel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PLL0, .name = NPCM8XX_CLK_S_PLL0 },
+	{ .fw_name = NPCM8XX_CLK_S_PLL1, .name = NPCM8XX_CLK_S_PLL1 },
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL_GFX, .name = NPCM8XX_CLK_S_PLL_GFX },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2_DIV2, .name = NPCM8XX_CLK_S_PLL2_DIV2 }
+};
+
+static const u32 gfxmsel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data gfxmsel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2_DIV2, .name = NPCM8XX_CLK_S_PLL2_DIV2 }
+};
+
+static const u32 dvcssel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data dvcssel_mux_parents[] = {
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+	{ .fw_name = NPCM8XX_CLK_S_PLL2, .name = NPCM8XX_CLK_S_PLL2 }
+};
+
+static const struct clk_parent_data pre_adc_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PRE_ADC, .name = NPCM8XX_CLK_S_PRE_ADC }
+};
+
+static const struct clk_parent_data pre_clk_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_PRE_CLK, .name = NPCM8XX_CLK_S_PRE_CLK }
+};
+
+static const struct clk_parent_data mux_adc_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_ADC_MUX, .name = NPCM8XX_CLK_S_ADC_MUX }
+};
+
+static const struct clk_parent_data mux_uart_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_UART_MUX, .name = NPCM8XX_CLK_S_UART_MUX }
+};
+
+static const struct clk_parent_data mux_sd_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_SD_MUX, .name = NPCM8XX_CLK_S_SD_MUX }
+};
+
+static const struct clk_parent_data ahb_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB }
+};
+
+static const struct clk_parent_data mux_gfx_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_GFX_MUX, .name = NPCM8XX_CLK_S_GFX_MUX }
+};
+
+static const struct clk_parent_data mux_clkout_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_CLKOUT_MUX, .name = NPCM8XX_CLK_S_CLKOUT_MUX }
+};
+
+static const struct clk_parent_data mux_su_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_SU_MUX, .name = NPCM8XX_CLK_S_SU_MUX }
+};
+
+static const struct clk_parent_data mux_rg_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_RG_MUX, .name = NPCM8XX_CLK_S_RG_MUX }
+};
+
+static const struct clk_parent_data mux_rcp_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_RCP_MUX, .name = NPCM8XX_CLK_S_RCP_MUX }
+};
+
+static const struct clk_parent_data mux_cpu_div_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_CPU_MUX, .name = NPCM8XX_CLK_S_CPU_MUX }
+};
+
+#define CLK_PLL(_reg, _name, _parent, _flags, _id) {			\
+		.pll.id = _id,						\
+		.pll.name = _name,					\
+		.pll.reg = _reg,					\
+		.hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent,	\
+						    &npcm8xx_clk_pll_ops,	\
+						    _flags),		\
+	}
+
+static struct clk_parent_data npcm8xx_pll_parent[] = {
+	{ .fw_name = NPCM8XX_CLK_S_REFCLK, .name = NPCM8XX_CLK_S_REFCLK },
+};
+
+static struct npcm8xx_clk_pll npcm8xx_pll_clks[] = {
+	CLK_PLL(NPCM8XX_PLLCON0, NPCM8XX_CLK_S_PLL0, npcm8xx_pll_parent, 0, -1),
+	CLK_PLL(NPCM8XX_PLLCON1, NPCM8XX_CLK_S_PLL1, npcm8xx_pll_parent, 0, -1),
+	CLK_PLL(NPCM8XX_PLLCON2, NPCM8XX_CLK_S_PLL2, npcm8xx_pll_parent, 0, -1),
+	CLK_PLL(NPCM8XX_PLLCONG, NPCM8XX_CLK_S_PLL_GFX, npcm8xx_pll_parent, 0, -1),
+};
+
+static const struct npcm8xx_clk_mux_data npcm8xx_muxes[] = {
+	{ 0, 3, cpuck_mux_table, NPCM8XX_CLK_S_CPU_MUX,
+	cpuck_mux_parents, ARRAY_SIZE(cpuck_mux_parents), CLK_IS_CRITICAL,
+	NPCM8XX_CLK_CPU },
+
+	{ 4, 2, pixcksel_mux_table, NPCM8XX_CLK_S_PIX_MUX,
+	pixcksel_mux_parents, ARRAY_SIZE(pixcksel_mux_parents), 0,
+	NPCM8XX_CLK_GFX_PIXEL },
+
+	{ 6, 2, pll_mux_table, NPCM8XX_CLK_S_SD_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+
+	{ 8, 2, pll_mux_table, NPCM8XX_CLK_S_UART_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+
+	{ 10, 2, sucksel_mux_table, NPCM8XX_CLK_S_SU_MUX,
+	sucksel_mux_parents, ARRAY_SIZE(sucksel_mux_parents), 0, -1 },
+
+	{ 12, 2, mccksel_mux_table, NPCM8XX_CLK_S_MC_MUX,
+	mccksel_mux_parents, ARRAY_SIZE(mccksel_mux_parents), 0, -1 },
+
+	{ 14, 2, pll_mux_table, NPCM8XX_CLK_S_ADC_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+
+	{ 16, 2, pll_mux_table, NPCM8XX_CLK_S_GFX_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+
+	{ 18, 3, clkoutsel_mux_table, NPCM8XX_CLK_S_CLKOUT_MUX,
+	clkoutsel_mux_parents, ARRAY_SIZE(clkoutsel_mux_parents), 0, -1 },
+
+	{ 21, 2, gfxmsel_mux_table, NPCM8XX_CLK_S_GFXM_MUX,
+	gfxmsel_mux_parents, ARRAY_SIZE(gfxmsel_mux_parents), 0, -1 },
+
+	{ 23, 2, dvcssel_mux_table, NPCM8XX_CLK_S_DVC_MUX,
+	dvcssel_mux_parents, ARRAY_SIZE(dvcssel_mux_parents), 0, -1 },
+
+	{ 25, 2, pll_mux_table, NPCM8XX_CLK_S_RG_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+
+	{ 27, 2, pll_mux_table, NPCM8XX_CLK_S_RCP_MUX,
+	pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1 },
+};
+
+/* configurable dividers: */
+static const struct npcm8xx_clk_div_data npcm8xx_divs[] = {
+	{ NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC, pre_adc_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_ADC },
+	/* bit 30-28 ADCCKDIV*/
+	{ NPCM8XX_CLKDIV1, 26, 2, NPCM8XX_CLK_S_AHB, pre_clk_div_parent,
+		CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB },
+	/* bit 28-26 CLK4DIV*/
+	{ NPCM8XX_CLKDIV1, 21, 5, NPCM8XX_CLK_S_PRE_ADC,
+	mux_adc_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_PRE_ADC },
+	/* bit 25-21 PRE-ADCCKDIV*/
+	{ NPCM8XX_CLKDIV1, 16, 5, NPCM8XX_CLK_S_UART,
+	mux_uart_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_UART },
+	/* bit 20-16 UARTDIV*/
+	{ NPCM8XX_CLKDIV1, 11, 5, NPCM8XX_CLK_S_MMC,
+	mux_sd_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_MMC },
+	/* bit 15-11 MMCCKDIV*/
+	{ NPCM8XX_CLKDIV1, 6, 5, NPCM8XX_CLK_S_SPI3,
+	ahb_div_parent, 0, 0, NPCM8XX_CLK_SPI3 },
+	/* bit 10-6 AHB3CKDIV*/
+	{ NPCM8XX_CLKDIV1, 2, 4, NPCM8XX_CLK_S_PCI,
+	mux_gfx_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_PCI },
+	/* bit 5-2 PCICKDIV*/
+
+	{ NPCM8XX_CLKDIV2, 30, 2, NPCM8XX_CLK_S_APB4, ahb_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_APB4 },
+	/* bit 31-30 APB4CKDIV*/
+	{ NPCM8XX_CLKDIV2, 28, 2, NPCM8XX_CLK_S_APB3, ahb_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_APB3 },
+	/* bit 29-28 APB3CKDIV*/
+	{ NPCM8XX_CLKDIV2, 26, 2, NPCM8XX_CLK_S_APB2, ahb_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_APB2 },
+	/* bit 28-26 APB2CKDIV*/
+	{ NPCM8XX_CLKDIV2, 24, 2, NPCM8XX_CLK_S_APB1, ahb_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_APB1 },
+	/* bit 25-24 APB1CKDIV*/
+	{ NPCM8XX_CLKDIV2, 22, 2, NPCM8XX_CLK_S_APB5, ahb_div_parent,
+		CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+		NPCM8XX_CLK_APB5 },
+	/* bit 23-22 APB5CKDIV*/
+	{ NPCM8XX_CLKDIV2, 16, 5, NPCM8XX_CLK_S_CLKOUT, mux_clkout_div_parent,
+		 CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_CLKOUT },
+	/* bit 20-16 CLKOUTDIV*/
+	{ NPCM8XX_CLKDIV2, 13, 3, NPCM8XX_CLK_S_GFX, mux_gfx_div_parent,
+		CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_GFX },
+	/* bit 15-13 GFXCKDIV*/
+	{ NPCM8XX_CLKDIV2, 8, 5, NPCM8XX_CLK_S_USB_BRIDGE, mux_su_div_parent,
+		CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU },
+	/* bit 12-8 SUCKDIV*/
+	{ NPCM8XX_CLKDIV2, 4, 4, NPCM8XX_CLK_S_USB_HOST, mux_su_div_parent,
+		CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU48 },
+	/* bit 8-4 SU48CKDIV*/
+	{ NPCM8XX_CLKDIV2, 0, 4, NPCM8XX_CLK_S_SDHC,
+	mux_sd_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SDHC }
+	,/* bit 3-0 SD1CKDIV*/
+
+	{ NPCM8XX_CLKDIV3, 16, 8, NPCM8XX_CLK_S_SPI1,
+	ahb_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI1 },
+	/* bit 23-16 SPI1CKDV*/
+	{ NPCM8XX_CLKDIV3, 11, 5, NPCM8XX_CLK_S_UART2,
+	mux_uart_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_UART2 },
+	/* bit 15-11 UARTDIV2*/
+	{ NPCM8XX_CLKDIV3, 6, 5, NPCM8XX_CLK_S_SPI0,
+	ahb_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI0 },
+	/* bit 10-6 SPI0CKDV*/
+	{ NPCM8XX_CLKDIV3, 1, 5, NPCM8XX_CLK_S_SPIX,
+	ahb_div_parent, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPIX },
+	/* bit 5-1 SPIXCKDV*/
+
+	{ NPCM8XX_CLKDIV4, 28, 4, NPCM8XX_CLK_S_RG, mux_rg_div_parent,
+	CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RG },
+	/* bit 31-28 RGREFDIV*/
+	{ NPCM8XX_CLKDIV4, 12, 4, NPCM8XX_CLK_S_RCP, mux_rcp_div_parent,
+	CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RCP },
+	/* bit 15-12 RCPREFDIV*/
+	{ NPCM8XX_THRTL_CNT, 0, 2, NPCM8XX_CLK_S_TH, mux_cpu_div_parent,
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_TH },
+	/* bit 1-0 TH_DIV*/
+};
+
+static DEFINE_SPINLOCK(npcm8xx_clk_lock);
+
+static int npcm8xx_clk_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *npcm8xx_clk_data;
+	struct device *dev = &pdev->dev;
+	void __iomem *clk_base;
+	struct resource *res;
+	struct clk_hw *hw;
+	unsigned int i;
+	int err;
+
+	npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
+							 NPCM8XX_NUM_CLOCKS),
+					GFP_KERNEL);
+	if (!npcm8xx_clk_data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	clk_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!clk_base) {
+		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+		return -ENOMEM;
+	}
+
+	npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
+
+	for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
+		npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+	/* Reference 25MHz clock */
+	hw = devm_clk_hw_register_fixed_rate(dev, "refclk", NULL, 0,
+					     NPCM8XX_REF_CLK);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
+
+	/* Register plls */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_pll_clks); i++) {
+		struct npcm8xx_clk_pll *pll_clk = &npcm8xx_pll_clks[i];
+
+		hw = npcm8xx_clk_register_pll(dev, pll_clk, clk_base);
+		if (IS_ERR(hw)) {
+			dev_err(dev, "npcm8xx_clk: Can't register pll\n");
+			goto unregister_refclk;
+		}
+	}
+
+	/* Register fixed dividers */
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
+					       NPCM8XX_CLK_S_PLL1, 0, 1, 2);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
+		goto unregister_refclk;
+	}
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
+					       NPCM8XX_CLK_S_PLL2, 0, 1, 2);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
+		goto unregister_refclk;
+	}
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
+					       NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
+		goto unregister_refclk;
+	}
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
+					       NPCM8XX_CLK_S_TH, 0, 1, 2);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
+		goto unregister_refclk;
+	}
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
+					       NPCM8XX_CLK_S_AXI, 0, 1, 2);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
+		goto unregister_refclk;
+	}
+
+	/* Register muxes */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
+		const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
+
+		hw = devm_clk_hw_register_mux_parent_data_table(dev,
+								mux_data->name,
+								mux_data->parent_data,
+								mux_data->num_parents,
+								mux_data->flags,
+								clk_base + NPCM8XX_CLKSEL,
+								mux_data->shift,
+								mux_data->mask,
+								0,
+								mux_data->table,
+								&npcm8xx_clk_lock);
+		if (IS_ERR(hw)) {
+			dev_err(dev, "npcm8xx_clk: Can't register mux\n");
+			goto err_mux_clk;
+		}
+
+		if (mux_data->onecell_idx >= 0)
+			npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
+	}
+
+	/* Register clock dividers specified in npcm8xx_divs */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
+		const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
+
+		hw = clk_hw_register_divider_parent_data(dev, div_data->name,
+							 div_data->parent_data,
+							 div_data->flags,
+							 clk_base + div_data->reg,
+							 div_data->shift,
+							 div_data->width,
+							 div_data->clk_divider_flags,
+							 &npcm8xx_clk_lock);
+		if (IS_ERR(hw)) {
+			dev_err(dev, "npcm8xx_clk: Can't register div table\n");
+			goto unregister_refclk;
+		}
+
+		if (div_data->onecell_idx >= 0)
+			npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
+	}
+
+	err = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					  npcm8xx_clk_data);
+	if (err) {
+		dev_err(dev, "unable to add clk provider\n");
+		hw = ERR_PTR(err);
+		goto err_mux_clk;
+	}
+
+	return err;
+
+err_mux_clk:
+	while (i--) {
+		if (npcm8xx_muxes[i].onecell_idx >= 0)
+			clk_hw_unregister_mux(npcm8xx_clk_data->hws[npcm8xx_muxes[i].onecell_idx]);
+	}
+unregister_refclk:
+	clk_hw_unregister(npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK]);
+	return PTR_ERR(hw);
+}
+
+static const struct of_device_id npcm8xx_clk_dt_ids[] = {
+	{ .compatible = "nuvoton,npcm845-clk", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
+
+static struct platform_driver npcm8xx_clk_driver = {
+	.probe  = npcm8xx_clk_probe,
+	.driver = {
+		.name = "npcm8xx_clk",
+		.of_match_table = npcm8xx_clk_dt_ids,
+	},
+};
+
+static int __init npcm8xx_clk_driver_init(void)
+{
+	return platform_driver_register(&npcm8xx_clk_driver);
+}
+arch_initcall(npcm8xx_clk_driver_init);
+
+static void __exit npcm8xx_clk_exit(void)
+{
+	platform_driver_unregister(&npcm8xx_clk_driver);
+}
+module_exit(npcm8xx_clk_exit);
+
+MODULE_DESCRIPTION("Clock driver for Nuvoton NPCM8XX BMC SoC");
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_LICENSE("GPL v2");
+