@@ -193,6 +193,7 @@ clk50m_phy: phy-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
+ clock-output-names = "enet_ref_pad";
};
reg_1v8: regulator-1v8 {
@@ -293,8 +294,10 @@ &can2 {
};
&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+ clocks = <&clk50m_phy>;
+ clock-names = "enet_ref_pad";
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
};
&ecspi1 {
@@ -314,10 +317,6 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
- clocks = <&clks IMX6QDL_CLK_ENET>,
- <&clks IMX6QDL_CLK_ENET>,
- <&clk50m_phy>;
- clock-names = "ipg", "ahb", "ptp";
phy-handle = <&rmii_phy>;
status = "okay";
Configure Ethernet reference clock parent in an obvious way instead of using cryptic ptp way. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-prtmvt.dts | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)