diff mbox series

[v2,05/19] ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parent

Message ID 20230117061453.3723649-6-o.rempel@pengutronix.de (mailing list archive)
State Not Applicable, archived
Headers show
Series ARM: imx: make Ethernet refclock configurable | expand

Commit Message

Oleksij Rempel Jan. 17, 2023, 6:14 a.m. UTC 
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-lanmcu.dts | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
index 6b6e6fcdea9c..fa823988312d 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
@@ -21,6 +21,7 @@  clock_ksz8081: clock-ksz8081 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	backlight: backlight {
@@ -109,14 +110,17 @@  &can2 {
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";