diff mbox series

[2/2] clk: qcom: restrict drivers per ARM/ARM64

Message ID 20230123094925.54824-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State Changes Requested, archived
Headers show
Series [1/2] clk: qcom: add compile test to MSM8996 CPU clocks | expand

Commit Message

Krzysztof Kozlowski Jan. 23, 2023, 9:49 a.m. UTC
There is no point to allow selecting pin-controller drivers for Qualcomm
ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
kernel configuration more difficult as many do not remember the Qualcomm
SoCs model names/numbers.  There won't be a single image for ARMv7 and
ARMv8/9 SoCs, so no features/options are lost.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/clk/qcom/Kconfig | 88 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

Comments

Konrad Dybcio Jan. 23, 2023, 12:31 p.m. UTC | #1
On 23.01.2023 10:49, Krzysztof Kozlowski wrote:
> There is no point to allow selecting pin-controller drivers for Qualcomm
> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
> kernel configuration more difficult as many do not remember the Qualcomm
> SoCs model names/numbers.  There won't be a single image for ARMv7 and
> ARMv8/9 SoCs, so no features/options are lost.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Not sure about the newest of the newest SoCs with Cortex-X etc,
but older ones, particularly including 8916 (as some vendors
in their infinite wisdom decided that shipping a 32 bit tz is
a good idea) having ARM || ARM64 would make sense.

Konrad
>  drivers/clk/qcom/Kconfig | 88 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 88 insertions(+)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 1c360eed72d7..3112ca762f4d 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -57,6 +57,7 @@ config QCOM_CLK_APCC_MSM8996
>  config QCOM_CLK_APCS_SDX55
>  	tristate "SDX55 and SDX65 APCS Clock Controller"
>  	depends on QCOM_APCS_IPC || COMPILE_TEST
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the APCS Clock Controller on SDX55, SDX65 platforms. The
>  	  APCS is managing the mux and divider which feeds the CPUs.
> @@ -100,6 +101,7 @@ config QCOM_CLK_RPMH
>  
>  config APQ_GCC_8084
>  	tristate "APQ8084 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on apq8084 devices.
> @@ -108,6 +110,7 @@ config APQ_GCC_8084
>  
>  config APQ_MMCC_8084
>  	tristate "APQ8084 Multimedia Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select APQ_GCC_8084
>  	select QCOM_GDSC
>  	help
> @@ -116,6 +119,7 @@ config APQ_MMCC_8084
>  	  graphics, video encode/decode, camera, etc.
>  
>  config IPQ_APSS_PLL
> +	depends on ARM64 || COMPILE_TEST
>  	tristate "IPQ APSS PLL"
>  	help
>  	  Support for APSS PLL on ipq devices. The APSS PLL is the main
> @@ -127,6 +131,7 @@ config IPQ_APSS_6018
>  	tristate "IPQ APSS Clock Controller"
>  	select IPQ_APSS_PLL
>  	depends on QCOM_APCS_IPC || COMPILE_TEST
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for APSS clock controller on IPQ platforms. The
>  	  APSS clock controller manages the Mux and enable block that feeds the
> @@ -143,6 +148,7 @@ config IPQ_GCC_4019
>  
>  config IPQ_GCC_6018
>  	tristate "IPQ6018 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for global clock controller on ipq6018 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -151,6 +157,7 @@ config IPQ_GCC_6018
>  
>  config IPQ_GCC_806X
>  	tristate "IPQ806x Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on ipq806x devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -158,6 +165,7 @@ config IPQ_GCC_806X
>  
>  config IPQ_LCC_806X
>  	tristate "IPQ806x LPASS Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select IPQ_GCC_806X
>  	help
>  	  Support for the LPASS clock controller on ipq806x devices.
> @@ -166,6 +174,7 @@ config IPQ_LCC_806X
>  
>  config IPQ_GCC_8074
>  	tristate "IPQ8074 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for global clock controller on ipq8074 devices.
> @@ -175,6 +184,7 @@ config IPQ_GCC_8074
>  
>  config MSM_GCC_8660
>  	tristate "MSM8660 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on msm8660 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -182,6 +192,7 @@ config MSM_GCC_8660
>  
>  config MSM_GCC_8909
>  	tristate "MSM8909 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8909 devices.
> @@ -206,6 +217,7 @@ config MSM_GCC_8939
>  
>  config MSM_GCC_8960
>  	tristate "APQ8064/MSM8960 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on apq8064/msm8960 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -213,6 +225,7 @@ config MSM_GCC_8960
>  
>  config MSM_LCC_8960
>  	tristate "APQ8064/MSM8960 LPASS Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select MSM_GCC_8960
>  	help
>  	  Support for the LPASS clock controller on apq8064/msm8960 devices.
> @@ -221,6 +234,7 @@ config MSM_LCC_8960
>  
>  config MDM_GCC_9607
>  	tristate "MDM9607 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on mdm9607 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -228,6 +242,7 @@ config MDM_GCC_9607
>  
>  config MDM_GCC_9615
>  	tristate "MDM9615 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on mdm9615 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -235,6 +250,7 @@ config MDM_GCC_9615
>  
>  config MDM_LCC_9615
>  	tristate "MDM9615 LPASS Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select MDM_GCC_9615
>  	help
>  	  Support for the LPASS clock controller on mdm9615 devices.
> @@ -243,6 +259,7 @@ config MDM_LCC_9615
>  
>  config MSM_MMCC_8960
>  	tristate "MSM8960 Multimedia Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select MSM_GCC_8960
>  	help
>  	  Support for the multimedia clock controller on msm8960 devices.
> @@ -251,6 +268,7 @@ config MSM_MMCC_8960
>  
>  config MSM_GCC_8953
>  	tristate "MSM8953 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8953 devices.
> @@ -259,6 +277,7 @@ config MSM_GCC_8953
>  
>  config MSM_GCC_8974
>  	tristate "MSM8974 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8974 devices.
> @@ -267,6 +286,7 @@ config MSM_GCC_8974
>  
>  config MSM_MMCC_8974
>  	tristate "MSM8974 Multimedia Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select MSM_GCC_8974
>  	select QCOM_GDSC
>  	help
> @@ -276,6 +296,7 @@ config MSM_MMCC_8974
>  
>  config MSM_GCC_8976
>  	tristate "MSM8956/76 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8956/76 devices.
> @@ -284,6 +305,7 @@ config MSM_GCC_8976
>  
>  config MSM_MMCC_8994
>  	tristate "MSM8994 Multimedia Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select MSM_GCC_8994
>  	select QCOM_GDSC
>  	help
> @@ -293,6 +315,7 @@ config MSM_MMCC_8994
>  
>  config MSM_GCC_8994
>  	tristate "MSM8994 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on msm8994 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -300,6 +323,7 @@ config MSM_GCC_8994
>  
>  config MSM_GCC_8996
>  	tristate "MSM8996 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8996 devices.
> @@ -308,6 +332,7 @@ config MSM_GCC_8996
>  
>  config MSM_MMCC_8996
>  	tristate "MSM8996 Multimedia Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select MSM_GCC_8996
>  	select QCOM_GDSC
>  	help
> @@ -317,6 +342,7 @@ config MSM_MMCC_8996
>  
>  config MSM_GCC_8998
>  	tristate "MSM8998 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on msm8998 devices.
> @@ -325,6 +351,7 @@ config MSM_GCC_8998
>  
>  config MSM_GPUCC_8998
>  	tristate "MSM8998 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select MSM_GCC_8998
>  	select QCOM_GDSC
>  	help
> @@ -334,6 +361,7 @@ config MSM_GPUCC_8998
>  
>  config MSM_MMCC_8998
>  	tristate "MSM8998 Multimedia Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select MSM_GCC_8998
>  	select QCOM_GDSC
>  	help
> @@ -351,6 +379,7 @@ config QCM_GCC_2290
>  
>  config QCM_DISPCC_2290
>  	tristate "QCM2290 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCM_GCC_2290
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -360,6 +389,7 @@ config QCM_DISPCC_2290
>  
>  config QCS_GCC_404
>  	tristate "QCS404 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on QCS404 devices.
>  	  Say Y if you want to use multimedia devices or peripheral
> @@ -367,6 +397,7 @@ config QCS_GCC_404
>  
>  config SC_CAMCC_7180
>  	tristate "SC7180 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the camera clock controller on Qualcomm Technologies, Inc
> @@ -376,6 +407,7 @@ config SC_CAMCC_7180
>  
>  config SC_CAMCC_7280
>  	tristate "SC7280 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	help
>  	  Support for the camera clock controller on Qualcomm Technologies, Inc
> @@ -385,6 +417,7 @@ config SC_CAMCC_7280
>  
>  config SC_DISPCC_7180
>  	tristate "SC7180 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -394,6 +427,7 @@ config SC_DISPCC_7180
>  
>  config SC_DISPCC_7280
>  	tristate "SC7280 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc.
> @@ -403,6 +437,7 @@ config SC_DISPCC_7280
>  
>  config SC_DISPCC_8280XP
>  	tristate "SC8280XP Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_8280XP
>  	help
>  	  Support for the two display clock controllers on Qualcomm
> @@ -414,6 +449,7 @@ config SC_GCC_7180
>  	tristate "SC7180 Global Clock Controller"
>  	select QCOM_GDSC
>  	depends on COMMON_CLK_QCOM
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SC7180 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -423,6 +459,7 @@ config SC_GCC_7280
>  	tristate "SC7280 Global Clock Controller"
>  	select QCOM_GDSC
>  	depends on COMMON_CLK_QCOM
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SC7280 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -432,6 +469,7 @@ config SC_GCC_8180X
>  	tristate "SC8180X Global Clock Controller"
>  	select QCOM_GDSC
>  	depends on COMMON_CLK_QCOM
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SC8180X devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -441,6 +479,7 @@ config SC_GCC_8280XP
>  	tristate "SC8280XP Global Clock Controller"
>  	select QCOM_GDSC
>  	depends on COMMON_CLK_QCOM
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SC8280XP devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -448,6 +487,7 @@ config SC_GCC_8280XP
>  
>  config SC_GPUCC_7180
>  	tristate "SC7180 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the graphics clock controller on SC7180 devices.
> @@ -456,6 +496,7 @@ config SC_GPUCC_7180
>  
>  config SC_GPUCC_7280
>  	tristate "SC7280 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	help
>  	  Support for the graphics clock controller on SC7280 devices.
> @@ -464,6 +505,7 @@ config SC_GPUCC_7280
>  
>  config SC_GPUCC_8280XP
>  	tristate "SC8280XP Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_8280XP
>  	help
>  	  Support for the graphics clock controller on SC8280XP devices.
> @@ -472,6 +514,7 @@ config SC_GPUCC_8280XP
>  
>  config SC_LPASSCC_7280
>  	tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	help
>  	  Support for the LPASS clock controller on SC7280 devices.
> @@ -480,6 +523,7 @@ config SC_LPASSCC_7280
>  
>  config SC_LPASS_CORECC_7180
>  	tristate "SC7180 LPASS Core Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the LPASS(Low Power Audio Subsystem) core clock controller
> @@ -489,6 +533,7 @@ config SC_LPASS_CORECC_7180
>  
>  config SC_LPASS_CORECC_7280
>  	tristate "SC7280 LPASS Core & Audio Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	select QCOM_GDSC
>  	help
> @@ -499,6 +544,7 @@ config SC_LPASS_CORECC_7280
>  
>  config SC_MSS_7180
>  	tristate "SC7180 Modem Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the Modem Subsystem clock controller on Qualcomm
> @@ -508,6 +554,7 @@ config SC_MSS_7180
>  
>  config SC_VIDEOCC_7180
>  	tristate "SC7180 Video Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7180
>  	help
>  	  Support for the video clock controller on SC7180 devices.
> @@ -516,6 +563,7 @@ config SC_VIDEOCC_7180
>  
>  config SC_VIDEOCC_7280
>  	tristate "SC7280 Video Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SC_GCC_7280
>  	help
>  	  Support for the video clock controller on SC7280 devices.
> @@ -524,6 +572,7 @@ config SC_VIDEOCC_7280
>  
>  config SDM_CAMCC_845
>  	tristate "SDM845 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_845
>  	help
>  	  Support for the camera clock controller on SDM845 devices.
> @@ -531,6 +580,7 @@ config SDM_CAMCC_845
>  
>  config SDM_GCC_660
>  	tristate "SDM660 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SDM660 devices.
> @@ -539,6 +589,7 @@ config SDM_GCC_660
>  
>  config SDM_MMCC_660
>  	tristate "SDM660 Multimedia Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_660
>  	select QCOM_GDSC
>  	help
> @@ -548,6 +599,7 @@ config SDM_MMCC_660
>  
>  config SDM_GPUCC_660
>  	tristate "SDM660 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_660
>  	select QCOM_GDSC
>  	help
> @@ -557,12 +609,14 @@ config SDM_GPUCC_660
>  
>  config QCS_TURING_404
>  	tristate "QCS404 Turing Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the Turing Clock Controller on QCS404, provides clocks
>  	  and resets for the Turing subsystem.
>  
>  config QCS_Q6SSTOP_404
>  	tristate "QCS404 Q6SSTOP Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCS_GCC_404
>  	help
>  	  Support for the Q6SSTOP clock controller on QCS404 devices.
> @@ -571,6 +625,7 @@ config QCS_Q6SSTOP_404
>  
>  config SDM_GCC_845
>  	tristate "SDM845/SDM670 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SDM845 and SDM670 devices.
> @@ -579,6 +634,7 @@ config SDM_GCC_845
>  
>  config SDM_GPUCC_845
>  	tristate "SDM845 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_845
>  	help
>  	  Support for the graphics clock controller on SDM845 devices.
> @@ -587,6 +643,7 @@ config SDM_GPUCC_845
>  
>  config SDM_VIDEOCC_845
>  	tristate "SDM845 Video Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_845
>  	select QCOM_GDSC
>  	help
> @@ -596,6 +653,7 @@ config SDM_VIDEOCC_845
>  
>  config SDM_DISPCC_845
>  	tristate "SDM845 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_845
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -605,6 +663,7 @@ config SDM_DISPCC_845
>  
>  config SDM_LPASSCC_845
>  	tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SDM_GCC_845
>  	help
>  	  Support for the LPASS clock controller on SDM845 devices.
> @@ -613,6 +672,7 @@ config SDM_LPASSCC_845
>  
>  config SDX_GCC_55
>  	tristate "SDX55 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SDX55 devices.
> @@ -621,6 +681,7 @@ config SDX_GCC_55
>  
>  config SDX_GCC_65
>  	tristate "SDX65 Global Clock Controller"
> +	depends on ARM || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SDX65 devices.
> @@ -629,6 +690,7 @@ config SDX_GCC_65
>  
>  config SM_CAMCC_6350
>  	tristate "SM6350 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_6350
>  	help
>  	  Support for the camera clock controller on SM6350 devices.
> @@ -636,6 +698,7 @@ config SM_CAMCC_6350
>  
>  config SM_CAMCC_8250
>  	tristate "SM8250 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8250
>  	help
>  	  Support for the camera clock controller on SM8250 devices.
> @@ -643,6 +706,7 @@ config SM_CAMCC_8250
>  
>  config SM_CAMCC_8450
>  	tristate "SM8450 Camera Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8450
>  	help
>  	  Support for the camera clock controller on SM8450 devices.
> @@ -650,6 +714,7 @@ config SM_CAMCC_8450
>  
>  config SM_DISPCC_6115
>  	tristate "SM6115 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_6115
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -659,6 +724,7 @@ config SM_DISPCC_6115
>  
>  config SM_DISPCC_6125
>  	tristate "SM6125 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_6125
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -668,6 +734,7 @@ config SM_DISPCC_6125
>  
>  config SM_DISPCC_8250
>  	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -677,6 +744,7 @@ config SM_DISPCC_8250
>  
>  config SM_DISPCC_6350
>  	tristate "SM6350 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_6350
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -686,6 +754,7 @@ config SM_DISPCC_6350
>  
>  config SM_DISPCC_6375
>  	tristate "SM6375 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_6375
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -695,6 +764,7 @@ config SM_DISPCC_6375
>  
>  config SM_DISPCC_8450
>  	tristate "SM8450 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_8450
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -704,6 +774,7 @@ config SM_DISPCC_8450
>  
>  config SM_DISPCC_8550
>  	tristate "SM8550 Display Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	depends on SM_GCC_8550
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> @@ -713,6 +784,7 @@ config SM_DISPCC_8550
>  
>  config SM_GCC_6115
>  	tristate "SM6115 and SM4250 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM6115 and SM4250 devices.
> @@ -721,6 +793,7 @@ config SM_GCC_6115
>  
>  config SM_GCC_6125
>  	tristate "SM6125 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SM6125 devices.
>  	  Say Y if you want to use peripheral devices such as UART,
> @@ -728,6 +801,7 @@ config SM_GCC_6125
>  
>  config SM_GCC_6350
>  	tristate "SM6350 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM6350 devices.
> @@ -736,6 +810,7 @@ config SM_GCC_6350
>  
>  config SM_GCC_6375
>  	tristate "SM6375 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM6375 devices.
> @@ -744,6 +819,7 @@ config SM_GCC_6375
>  
>  config SM_GCC_8150
>  	tristate "SM8150 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the global clock controller on SM8150 devices.
>  	  Say Y if you want to use peripheral devices such as UART,
> @@ -751,6 +827,7 @@ config SM_GCC_8150
>  
>  config SM_GCC_8250
>  	tristate "SM8250 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM8250 devices.
> @@ -759,6 +836,7 @@ config SM_GCC_8250
>  
>  config SM_GCC_8350
>  	tristate "SM8350 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM8350 devices.
> @@ -767,6 +845,7 @@ config SM_GCC_8350
>  
>  config SM_GCC_8450
>  	tristate "SM8450 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM8450 devices.
> @@ -775,6 +854,7 @@ config SM_GCC_8450
>  
>  config SM_GCC_8550
>  	tristate "SM8550 Global Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM8550 devices.
> @@ -783,6 +863,7 @@ config SM_GCC_8550
>  
>  config SM_GPUCC_6350
>  	tristate "SM6350 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_6350
>  	help
>  	  Support for the graphics clock controller on SM6350 devices.
> @@ -791,6 +872,7 @@ config SM_GPUCC_6350
>  
>  config SM_GPUCC_8150
>  	tristate "SM8150 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8150
>  	help
>  	  Support for the graphics clock controller on SM8150 devices.
> @@ -799,6 +881,7 @@ config SM_GPUCC_8150
>  
>  config SM_GPUCC_8250
>  	tristate "SM8250 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8250
>  	help
>  	  Support for the graphics clock controller on SM8250 devices.
> @@ -807,6 +890,7 @@ config SM_GPUCC_8250
>  
>  config SM_GPUCC_8350
>  	tristate "SM8350 Graphics Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8350
>  	help
>  	  Support for the graphics clock controller on SM8350 devices.
> @@ -815,6 +899,7 @@ config SM_GPUCC_8350
>  
>  config SM_TCSRCC_8550
>  	tristate "SM8550 TCSR Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select QCOM_GDSC
>  	help
>  	  Support for the TCSR clock controller on SM8550 devices.
> @@ -822,6 +907,7 @@ config SM_TCSRCC_8550
>  
>  config SM_VIDEOCC_8150
>  	tristate "SM8150 Video Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8150
>  	select QCOM_GDSC
>  	help
> @@ -831,6 +917,7 @@ config SM_VIDEOCC_8150
>  
>  config SM_VIDEOCC_8250
>  	tristate "SM8250 Video Clock Controller"
> +	depends on ARM64 || COMPILE_TEST
>  	select SM_GCC_8250
>  	select QCOM_GDSC
>  	help
> @@ -871,6 +958,7 @@ config KRAITCC
>  
>  config CLK_GFM_LPASS_SM8250
>  	tristate "SM8250 GFM LPASS Clocks"
> +	depends on ARM64 || COMPILE_TEST
>  	help
>  	  Support for the Glitch Free Mux (GFM) Low power audio
>            subsystem (LPASS) clocks found on SM8250 SoCs.
Krzysztof Kozlowski Jan. 23, 2023, 12:45 p.m. UTC | #2
On 23/01/2023 13:31, Konrad Dybcio wrote:
> 
> 
> On 23.01.2023 10:49, Krzysztof Kozlowski wrote:
>> There is no point to allow selecting pin-controller drivers for Qualcomm
>> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
>> kernel configuration more difficult as many do not remember the Qualcomm
>> SoCs model names/numbers.  There won't be a single image for ARMv7 and
>> ARMv8/9 SoCs, so no features/options are lost.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
> Not sure about the newest of the newest SoCs with Cortex-X etc,
> but older ones, particularly including 8916 (as some vendors
> in their infinite wisdom decided that shipping a 32 bit tz is
> a good idea) having ARM || ARM64 would make sense.

Why? ARM || ARM64 is implied by ARCH_QCOM, so what would it give?

Best regards,
Krzysztof
Konrad Dybcio Jan. 23, 2023, 12:47 p.m. UTC | #3
On 23.01.2023 13:45, Krzysztof Kozlowski wrote:
> On 23/01/2023 13:31, Konrad Dybcio wrote:
>>
>>
>> On 23.01.2023 10:49, Krzysztof Kozlowski wrote:
>>> There is no point to allow selecting pin-controller drivers for Qualcomm
>>> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
>>> kernel configuration more difficult as many do not remember the Qualcomm
>>> SoCs model names/numbers.  There won't be a single image for ARMv7 and
>>> ARMv8/9 SoCs, so no features/options are lost.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> ---
>> Not sure about the newest of the newest SoCs with Cortex-X etc,
>> but older ones, particularly including 8916 (as some vendors
>> in their infinite wisdom decided that shipping a 32 bit tz is
>> a good idea) having ARM || ARM64 would make sense.
> 
> Why? ARM || ARM64 is implied by ARCH_QCOM, so what would it give?
Err.. my mistake.. I skipped over your patch too quickly and
didn't notice you did not in fact touch 8916.. Sorry..

Konrad
> 
> Best regards,
> Krzysztof
>
Stephen Boyd Jan. 25, 2023, 8:44 p.m. UTC | #4
Quoting Krzysztof Kozlowski (2023-01-23 01:49:25)
> There is no point to allow selecting pin-controller drivers for Qualcomm

pin controllers?

> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
> kernel configuration more difficult as many do not remember the Qualcomm
> SoCs model names/numbers.  There won't be a single image for ARMv7 and
> ARMv8/9 SoCs, so no features/options are lost.

Are the drivers used in arm32 emulation mode on these SoCs? I recall
there are some SoCs they run with the arm architecture.
Krzysztof Kozlowski Jan. 26, 2023, 9:31 a.m. UTC | #5
On 25/01/2023 21:44, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2023-01-23 01:49:25)
>> There is no point to allow selecting pin-controller drivers for Qualcomm
> 
> pin controllers?

Copy-paste, I'll fix it.

> 
>> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
>> kernel configuration more difficult as many do not remember the Qualcomm
>> SoCs model names/numbers.  There won't be a single image for ARMv7 and
>> ARMv8/9 SoCs, so no features/options are lost.
> 
> Are the drivers used in arm32 emulation mode on these SoCs? I recall
> there are some SoCs they run with the arm architecture.

I did not add it to the few SoCs which have upstream DTS in ARM and
ARM64. I added only to the ones which are in one specific folder. Also
my patch does not affect defconfigs (qcom_defconfig and arm64/defconfig).

Whether downstream could be affected, I do not know. Anyway, what's
downstream it's the downstream's problem...


Best regards,
Krzysztof
Stephen Boyd Jan. 30, 2023, 11:30 p.m. UTC | #6
Quoting Krzysztof Kozlowski (2023-01-26 01:31:55)
> On 25/01/2023 21:44, Stephen Boyd wrote:
> > Quoting Krzysztof Kozlowski (2023-01-23 01:49:25)
> >> There is no point to allow selecting pin-controller drivers for Qualcomm
> > 
> > pin controllers?
> 
> Copy-paste, I'll fix it.
> 
> > 
> >> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
> >> kernel configuration more difficult as many do not remember the Qualcomm
> >> SoCs model names/numbers.  There won't be a single image for ARMv7 and
> >> ARMv8/9 SoCs, so no features/options are lost.
> > 
> > Are the drivers used in arm32 emulation mode on these SoCs? I recall
> > there are some SoCs they run with the arm architecture.
> 
> I did not add it to the few SoCs which have upstream DTS in ARM and
> ARM64. I added only to the ones which are in one specific folder. Also
> my patch does not affect defconfigs (qcom_defconfig and arm64/defconfig).

Cool, thanks for checking. Is it possible to take a dtb from arm64 dts
directory and boot it on an armv8 CPU running in 32-bit mode? Just
wondering if even having the dts file exist in the arm64 architecture
really matters here.

> 
> Whether downstream could be affected, I do not know. Anyway, what's
> downstream it's the downstream's problem...
> 

Agreed. I wasn't asking about downstream.
Krzysztof Kozlowski Feb. 1, 2023, 7:12 a.m. UTC | #7
On 31/01/2023 00:30, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2023-01-26 01:31:55)
>> On 25/01/2023 21:44, Stephen Boyd wrote:
>>> Quoting Krzysztof Kozlowski (2023-01-23 01:49:25)
>>>> There is no point to allow selecting pin-controller drivers for Qualcomm
>>>
>>> pin controllers?
>>
>> Copy-paste, I'll fix it.
>>
>>>
>>>> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
>>>> kernel configuration more difficult as many do not remember the Qualcomm
>>>> SoCs model names/numbers.  There won't be a single image for ARMv7 and
>>>> ARMv8/9 SoCs, so no features/options are lost.
>>>
>>> Are the drivers used in arm32 emulation mode on these SoCs? I recall
>>> there are some SoCs they run with the arm architecture.
>>
>> I did not add it to the few SoCs which have upstream DTS in ARM and
>> ARM64. I added only to the ones which are in one specific folder. Also
>> my patch does not affect defconfigs (qcom_defconfig and arm64/defconfig).
> 
> Cool, thanks for checking. Is it possible to take a dtb from arm64 dts
> directory and boot it on an armv8 CPU running in 32-bit mode? Just
> wondering if even having the dts file exist in the arm64 architecture
> really matters here.

If DTSI (and/or board DTS) is in arm64, you still need DTS or a link in
arm directory. If such one is added, then the restrictions here can be
removed. Have in mind that I did the same already for pinctrl.


Best regards,
Krzysztof
Stephen Boyd Feb. 10, 2023, 10:32 p.m. UTC | #8
Quoting Krzysztof Kozlowski (2023-01-31 23:12:53)
> On 31/01/2023 00:30, Stephen Boyd wrote:
> > Quoting Krzysztof Kozlowski (2023-01-26 01:31:55)
> >> On 25/01/2023 21:44, Stephen Boyd wrote:
> >>> Quoting Krzysztof Kozlowski (2023-01-23 01:49:25)
> >>>> There is no point to allow selecting pin-controller drivers for Qualcomm
> >>>
> >>> pin controllers?
> >>
> >> Copy-paste, I'll fix it.
> >>
> >>>
> >>>> ARMv7 SoCs when building ARM64 kernel, and vice versa.  This makes
> >>>> kernel configuration more difficult as many do not remember the Qualcomm
> >>>> SoCs model names/numbers.  There won't be a single image for ARMv7 and
> >>>> ARMv8/9 SoCs, so no features/options are lost.
> >>>
> >>> Are the drivers used in arm32 emulation mode on these SoCs? I recall
> >>> there are some SoCs they run with the arm architecture.
> >>
> >> I did not add it to the few SoCs which have upstream DTS in ARM and
> >> ARM64. I added only to the ones which are in one specific folder. Also
> >> my patch does not affect defconfigs (qcom_defconfig and arm64/defconfig).
> > 
> > Cool, thanks for checking. Is it possible to take a dtb from arm64 dts
> > directory and boot it on an armv8 CPU running in 32-bit mode? Just
> > wondering if even having the dts file exist in the arm64 architecture
> > really matters here.
> 
> If DTSI (and/or board DTS) is in arm64, you still need DTS or a link in
> arm directory. If such one is added, then the restrictions here can be
> removed. Have in mind that I did the same already for pinctrl.
> 

I'm saying that you put the dts file in arch/arm64/boot/dts/, compile
the dts to a dtb and stick it on a board that boots the kernel in arm32
mode. If it is possible to boot the dtb on a CPU running in arm32 mode
then this restriction should be loosened to 

	depends on ARM || ARM64 || COMPILE_TEST
Krzysztof Kozlowski Feb. 11, 2023, 11:19 a.m. UTC | #9
On 10/02/2023 23:32, Stephen Boyd wrote:
>>
>> If DTSI (and/or board DTS) is in arm64, you still need DTS or a link in
>> arm directory. If such one is added, then the restrictions here can be
>> removed. Have in mind that I did the same already for pinctrl.
>>
> 
> I'm saying that you put the dts file in arch/arm64/boot/dts/, compile
> the dts to a dtb and stick it on a board that boots the kernel in arm32
> mode. If it is possible to boot the dtb on a CPU running in arm32 mode
> then this restriction should be loosened to 
> 
> 	depends on ARM || ARM64 || COMPILE_TEST

I get your point. I don't think we consider this as use case at all,
especially that we are changing some of the boards from address-cells=1
to 2. Also whatever is happening out-of-tree it's out-of-tree problem.
If we want to support such case, then the DTS would have to be in
arch/arm directory (like we do for few boards).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 1c360eed72d7..3112ca762f4d 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -57,6 +57,7 @@  config QCOM_CLK_APCC_MSM8996
 config QCOM_CLK_APCS_SDX55
 	tristate "SDX55 and SDX65 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the APCS Clock Controller on SDX55, SDX65 platforms. The
 	  APCS is managing the mux and divider which feeds the CPUs.
@@ -100,6 +101,7 @@  config QCOM_CLK_RPMH
 
 config APQ_GCC_8084
 	tristate "APQ8084 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on apq8084 devices.
@@ -108,6 +110,7 @@  config APQ_GCC_8084
 
 config APQ_MMCC_8084
 	tristate "APQ8084 Multimedia Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select APQ_GCC_8084
 	select QCOM_GDSC
 	help
@@ -116,6 +119,7 @@  config APQ_MMCC_8084
 	  graphics, video encode/decode, camera, etc.
 
 config IPQ_APSS_PLL
+	depends on ARM64 || COMPILE_TEST
 	tristate "IPQ APSS PLL"
 	help
 	  Support for APSS PLL on ipq devices. The APSS PLL is the main
@@ -127,6 +131,7 @@  config IPQ_APSS_6018
 	tristate "IPQ APSS Clock Controller"
 	select IPQ_APSS_PLL
 	depends on QCOM_APCS_IPC || COMPILE_TEST
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for APSS clock controller on IPQ platforms. The
 	  APSS clock controller manages the Mux and enable block that feeds the
@@ -143,6 +148,7 @@  config IPQ_GCC_4019
 
 config IPQ_GCC_6018
 	tristate "IPQ6018 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for global clock controller on ipq6018 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -151,6 +157,7 @@  config IPQ_GCC_6018
 
 config IPQ_GCC_806X
 	tristate "IPQ806x Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on ipq806x devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -158,6 +165,7 @@  config IPQ_GCC_806X
 
 config IPQ_LCC_806X
 	tristate "IPQ806x LPASS Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select IPQ_GCC_806X
 	help
 	  Support for the LPASS clock controller on ipq806x devices.
@@ -166,6 +174,7 @@  config IPQ_LCC_806X
 
 config IPQ_GCC_8074
 	tristate "IPQ8074 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for global clock controller on ipq8074 devices.
@@ -175,6 +184,7 @@  config IPQ_GCC_8074
 
 config MSM_GCC_8660
 	tristate "MSM8660 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on msm8660 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -182,6 +192,7 @@  config MSM_GCC_8660
 
 config MSM_GCC_8909
 	tristate "MSM8909 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8909 devices.
@@ -206,6 +217,7 @@  config MSM_GCC_8939
 
 config MSM_GCC_8960
 	tristate "APQ8064/MSM8960 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on apq8064/msm8960 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -213,6 +225,7 @@  config MSM_GCC_8960
 
 config MSM_LCC_8960
 	tristate "APQ8064/MSM8960 LPASS Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8960
 	help
 	  Support for the LPASS clock controller on apq8064/msm8960 devices.
@@ -221,6 +234,7 @@  config MSM_LCC_8960
 
 config MDM_GCC_9607
 	tristate "MDM9607 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on mdm9607 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -228,6 +242,7 @@  config MDM_GCC_9607
 
 config MDM_GCC_9615
 	tristate "MDM9615 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on mdm9615 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -235,6 +250,7 @@  config MDM_GCC_9615
 
 config MDM_LCC_9615
 	tristate "MDM9615 LPASS Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select MDM_GCC_9615
 	help
 	  Support for the LPASS clock controller on mdm9615 devices.
@@ -243,6 +259,7 @@  config MDM_LCC_9615
 
 config MSM_MMCC_8960
 	tristate "MSM8960 Multimedia Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8960
 	help
 	  Support for the multimedia clock controller on msm8960 devices.
@@ -251,6 +268,7 @@  config MSM_MMCC_8960
 
 config MSM_GCC_8953
 	tristate "MSM8953 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8953 devices.
@@ -259,6 +277,7 @@  config MSM_GCC_8953
 
 config MSM_GCC_8974
 	tristate "MSM8974 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8974 devices.
@@ -267,6 +286,7 @@  config MSM_GCC_8974
 
 config MSM_MMCC_8974
 	tristate "MSM8974 Multimedia Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8974
 	select QCOM_GDSC
 	help
@@ -276,6 +296,7 @@  config MSM_MMCC_8974
 
 config MSM_GCC_8976
 	tristate "MSM8956/76 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8956/76 devices.
@@ -284,6 +305,7 @@  config MSM_GCC_8976
 
 config MSM_MMCC_8994
 	tristate "MSM8994 Multimedia Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select MSM_GCC_8994
 	select QCOM_GDSC
 	help
@@ -293,6 +315,7 @@  config MSM_MMCC_8994
 
 config MSM_GCC_8994
 	tristate "MSM8994 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on msm8994 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -300,6 +323,7 @@  config MSM_GCC_8994
 
 config MSM_GCC_8996
 	tristate "MSM8996 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8996 devices.
@@ -308,6 +332,7 @@  config MSM_GCC_8996
 
 config MSM_MMCC_8996
 	tristate "MSM8996 Multimedia Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select MSM_GCC_8996
 	select QCOM_GDSC
 	help
@@ -317,6 +342,7 @@  config MSM_MMCC_8996
 
 config MSM_GCC_8998
 	tristate "MSM8998 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on msm8998 devices.
@@ -325,6 +351,7 @@  config MSM_GCC_8998
 
 config MSM_GPUCC_8998
 	tristate "MSM8998 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select MSM_GCC_8998
 	select QCOM_GDSC
 	help
@@ -334,6 +361,7 @@  config MSM_GPUCC_8998
 
 config MSM_MMCC_8998
 	tristate "MSM8998 Multimedia Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select MSM_GCC_8998
 	select QCOM_GDSC
 	help
@@ -351,6 +379,7 @@  config QCM_GCC_2290
 
 config QCM_DISPCC_2290
 	tristate "QCM2290 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCM_GCC_2290
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -360,6 +389,7 @@  config QCM_DISPCC_2290
 
 config QCS_GCC_404
 	tristate "QCS404 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on QCS404 devices.
 	  Say Y if you want to use multimedia devices or peripheral
@@ -367,6 +397,7 @@  config QCS_GCC_404
 
 config SC_CAMCC_7180
 	tristate "SC7180 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
@@ -376,6 +407,7 @@  config SC_CAMCC_7180
 
 config SC_CAMCC_7280
 	tristate "SC7280 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
@@ -385,6 +417,7 @@  config SC_CAMCC_7280
 
 config SC_DISPCC_7180
 	tristate "SC7180 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -394,6 +427,7 @@  config SC_DISPCC_7180
 
 config SC_DISPCC_7280
 	tristate "SC7280 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc.
@@ -403,6 +437,7 @@  config SC_DISPCC_7280
 
 config SC_DISPCC_8280XP
 	tristate "SC8280XP Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
 	help
 	  Support for the two display clock controllers on Qualcomm
@@ -414,6 +449,7 @@  config SC_GCC_7180
 	tristate "SC7180 Global Clock Controller"
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SC7180 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -423,6 +459,7 @@  config SC_GCC_7280
 	tristate "SC7280 Global Clock Controller"
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SC7280 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -432,6 +469,7 @@  config SC_GCC_8180X
 	tristate "SC8180X Global Clock Controller"
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SC8180X devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -441,6 +479,7 @@  config SC_GCC_8280XP
 	tristate "SC8280XP Global Clock Controller"
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SC8280XP devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -448,6 +487,7 @@  config SC_GCC_8280XP
 
 config SC_GPUCC_7180
 	tristate "SC7180 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the graphics clock controller on SC7180 devices.
@@ -456,6 +496,7 @@  config SC_GPUCC_7180
 
 config SC_GPUCC_7280
 	tristate "SC7280 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	help
 	  Support for the graphics clock controller on SC7280 devices.
@@ -464,6 +505,7 @@  config SC_GPUCC_7280
 
 config SC_GPUCC_8280XP
 	tristate "SC8280XP Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
 	help
 	  Support for the graphics clock controller on SC8280XP devices.
@@ -472,6 +514,7 @@  config SC_GPUCC_8280XP
 
 config SC_LPASSCC_7280
 	tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	help
 	  Support for the LPASS clock controller on SC7280 devices.
@@ -480,6 +523,7 @@  config SC_LPASSCC_7280
 
 config SC_LPASS_CORECC_7180
 	tristate "SC7180 LPASS Core Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the LPASS(Low Power Audio Subsystem) core clock controller
@@ -489,6 +533,7 @@  config SC_LPASS_CORECC_7180
 
 config SC_LPASS_CORECC_7280
 	tristate "SC7280 LPASS Core & Audio Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	select QCOM_GDSC
 	help
@@ -499,6 +544,7 @@  config SC_LPASS_CORECC_7280
 
 config SC_MSS_7180
 	tristate "SC7180 Modem Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the Modem Subsystem clock controller on Qualcomm
@@ -508,6 +554,7 @@  config SC_MSS_7180
 
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
 	help
 	  Support for the video clock controller on SC7180 devices.
@@ -516,6 +563,7 @@  config SC_VIDEOCC_7180
 
 config SC_VIDEOCC_7280
 	tristate "SC7280 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	help
 	  Support for the video clock controller on SC7280 devices.
@@ -524,6 +572,7 @@  config SC_VIDEOCC_7280
 
 config SDM_CAMCC_845
 	tristate "SDM845 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	help
 	  Support for the camera clock controller on SDM845 devices.
@@ -531,6 +580,7 @@  config SDM_CAMCC_845
 
 config SDM_GCC_660
 	tristate "SDM660 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SDM660 devices.
@@ -539,6 +589,7 @@  config SDM_GCC_660
 
 config SDM_MMCC_660
 	tristate "SDM660 Multimedia Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_660
 	select QCOM_GDSC
 	help
@@ -548,6 +599,7 @@  config SDM_MMCC_660
 
 config SDM_GPUCC_660
 	tristate "SDM660 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_660
 	select QCOM_GDSC
 	help
@@ -557,12 +609,14 @@  config SDM_GPUCC_660
 
 config QCS_TURING_404
 	tristate "QCS404 Turing Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the Turing Clock Controller on QCS404, provides clocks
 	  and resets for the Turing subsystem.
 
 config QCS_Q6SSTOP_404
 	tristate "QCS404 Q6SSTOP Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCS_GCC_404
 	help
 	  Support for the Q6SSTOP clock controller on QCS404 devices.
@@ -571,6 +625,7 @@  config QCS_Q6SSTOP_404
 
 config SDM_GCC_845
 	tristate "SDM845/SDM670 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SDM845 and SDM670 devices.
@@ -579,6 +634,7 @@  config SDM_GCC_845
 
 config SDM_GPUCC_845
 	tristate "SDM845 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	help
 	  Support for the graphics clock controller on SDM845 devices.
@@ -587,6 +643,7 @@  config SDM_GPUCC_845
 
 config SDM_VIDEOCC_845
 	tristate "SDM845 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	select QCOM_GDSC
 	help
@@ -596,6 +653,7 @@  config SDM_VIDEOCC_845
 
 config SDM_DISPCC_845
 	tristate "SDM845 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -605,6 +663,7 @@  config SDM_DISPCC_845
 
 config SDM_LPASSCC_845
 	tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	help
 	  Support for the LPASS clock controller on SDM845 devices.
@@ -613,6 +672,7 @@  config SDM_LPASSCC_845
 
 config SDX_GCC_55
 	tristate "SDX55 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SDX55 devices.
@@ -621,6 +681,7 @@  config SDX_GCC_55
 
 config SDX_GCC_65
 	tristate "SDX65 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SDX65 devices.
@@ -629,6 +690,7 @@  config SDX_GCC_65
 
 config SM_CAMCC_6350
 	tristate "SM6350 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6350
 	help
 	  Support for the camera clock controller on SM6350 devices.
@@ -636,6 +698,7 @@  config SM_CAMCC_6350
 
 config SM_CAMCC_8250
 	tristate "SM8250 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
 	help
 	  Support for the camera clock controller on SM8250 devices.
@@ -643,6 +706,7 @@  config SM_CAMCC_8250
 
 config SM_CAMCC_8450
 	tristate "SM8450 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8450
 	help
 	  Support for the camera clock controller on SM8450 devices.
@@ -650,6 +714,7 @@  config SM_CAMCC_8450
 
 config SM_DISPCC_6115
 	tristate "SM6115 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6115
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -659,6 +724,7 @@  config SM_DISPCC_6115
 
 config SM_DISPCC_6125
 	tristate "SM6125 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6125
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -668,6 +734,7 @@  config SM_DISPCC_6125
 
 config SM_DISPCC_8250
 	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -677,6 +744,7 @@  config SM_DISPCC_8250
 
 config SM_DISPCC_6350
 	tristate "SM6350 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6350
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -686,6 +754,7 @@  config SM_DISPCC_6350
 
 config SM_DISPCC_6375
 	tristate "SM6375 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6375
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -695,6 +764,7 @@  config SM_DISPCC_6375
 
 config SM_DISPCC_8450
 	tristate "SM8450 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8450
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -704,6 +774,7 @@  config SM_DISPCC_8450
 
 config SM_DISPCC_8550
 	tristate "SM8550 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8550
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -713,6 +784,7 @@  config SM_DISPCC_8550
 
 config SM_GCC_6115
 	tristate "SM6115 and SM4250 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM6115 and SM4250 devices.
@@ -721,6 +793,7 @@  config SM_GCC_6115
 
 config SM_GCC_6125
 	tristate "SM6125 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SM6125 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -728,6 +801,7 @@  config SM_GCC_6125
 
 config SM_GCC_6350
 	tristate "SM6350 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM6350 devices.
@@ -736,6 +810,7 @@  config SM_GCC_6350
 
 config SM_GCC_6375
 	tristate "SM6375 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM6375 devices.
@@ -744,6 +819,7 @@  config SM_GCC_6375
 
 config SM_GCC_8150
 	tristate "SM8150 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the global clock controller on SM8150 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -751,6 +827,7 @@  config SM_GCC_8150
 
 config SM_GCC_8250
 	tristate "SM8250 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM8250 devices.
@@ -759,6 +836,7 @@  config SM_GCC_8250
 
 config SM_GCC_8350
 	tristate "SM8350 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM8350 devices.
@@ -767,6 +845,7 @@  config SM_GCC_8350
 
 config SM_GCC_8450
 	tristate "SM8450 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM8450 devices.
@@ -775,6 +854,7 @@  config SM_GCC_8450
 
 config SM_GCC_8550
 	tristate "SM8550 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM8550 devices.
@@ -783,6 +863,7 @@  config SM_GCC_8550
 
 config SM_GPUCC_6350
 	tristate "SM6350 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6350
 	help
 	  Support for the graphics clock controller on SM6350 devices.
@@ -791,6 +872,7 @@  config SM_GPUCC_6350
 
 config SM_GPUCC_8150
 	tristate "SM8150 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8150
 	help
 	  Support for the graphics clock controller on SM8150 devices.
@@ -799,6 +881,7 @@  config SM_GPUCC_8150
 
 config SM_GPUCC_8250
 	tristate "SM8250 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
 	help
 	  Support for the graphics clock controller on SM8250 devices.
@@ -807,6 +890,7 @@  config SM_GPUCC_8250
 
 config SM_GPUCC_8350
 	tristate "SM8350 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8350
 	help
 	  Support for the graphics clock controller on SM8350 devices.
@@ -815,6 +899,7 @@  config SM_GPUCC_8350
 
 config SM_TCSRCC_8550
 	tristate "SM8550 TCSR Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the TCSR clock controller on SM8550 devices.
@@ -822,6 +907,7 @@  config SM_TCSRCC_8550
 
 config SM_VIDEOCC_8150
 	tristate "SM8150 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8150
 	select QCOM_GDSC
 	help
@@ -831,6 +917,7 @@  config SM_VIDEOCC_8150
 
 config SM_VIDEOCC_8250
 	tristate "SM8250 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
 	select QCOM_GDSC
 	help
@@ -871,6 +958,7 @@  config KRAITCC
 
 config CLK_GFM_LPASS_SM8250
 	tristate "SM8250 GFM LPASS Clocks"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for the Glitch Free Mux (GFM) Low power audio
           subsystem (LPASS) clocks found on SM8250 SoCs.