diff mbox series

[V3,8/9] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support

Message ID 20230206071217.29313-9-quic_kathirav@quicinc.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add minimal boot support for IPQ5332 | expand

Commit Message

Kathiravan Thirumoorthy Feb. 6, 2023, 7:12 a.m. UTC
Add initial device tree support for the Qualcomm IPQ5332 SoC and
MI01.2 board.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
Changes in V3:
	- Updated the V2M node name to reflect the proper address
	- In reserved-memory node, changed the order of the 'reg' and
	  'no-map' property
	- Moved the below properties to the board DTS
		bus-width = <4>;
		max-frequency = <192000000>;
		mmc-ddr-1_8v;
		mmc-hs200-1_8v;

Changes in V2:
	- Changed the license to BSD3 in the file ipq5332-mi01.2.dts
	- Updated the model name, not to include the foundry ID
	- Used the decimal notation instead of hex for 'cache-level'
	  property
	- Dropped the blank line
	- Updated the node name for the TZ reserved region
	- Moved the 'compatible' property as first one in the node,
	  wherever applicable
	- Used the decimal notation for *-cells property insrtead of
	  hex
	- Reorganised the properties of memory mapped timer node as
	  below
		- reg
		- interrupts
		- frame-number
	- Fixed the indentation in timer node

 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts |  75 ++++++
 arch/arm64/boot/dts/qcom/ipq5332.dtsi       | 268 ++++++++++++++++++++
 3 files changed, 344 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 557d77d48dc8..03431cfde6a5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
new file mode 100644
index 000000000000..702013b867d7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
@@ -0,0 +1,75 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2";
+	compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 000000000000..4ded165653c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,268 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5332", "qcom,scm";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_mem: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5332-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 53>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_0_pins: serial0-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp0_uart0";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5332-gcc";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie_2lane_phy_pipe_clk",
+				      "pcie_2lane_phy_pipe_clk_x1",
+				      "usb_pcie_wrapper_pipe_clk";
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,	/* GICD */
+			      <0x0b002000 0x1000>,	/* GICC */
+			      <0x0b001000 0x1000>,	/* GICH */
+			      <0x0b004000 0x1000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};