diff mbox series

[net-next,v2,06/12] arm64: dts: qcom: sc8280xp: Add ethernet nodes

Message ID 20230320221617.236323-7-ahalaney@redhat.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add EMAC3 support for sa8540p-ride | expand

Commit Message

Andrew Halaney March 20, 2023, 10:16 p.m. UTC
This platform has 2 MACs integrated in it, go ahead and describe them.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
	* None

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 53 ++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

Konrad Dybcio March 21, 2023, 7:33 p.m. UTC | #1
On 20.03.2023 23:16, Andrew Halaney wrote:
> This platform has 2 MACs integrated in it, go ahead and describe them.
> 
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
> 
> Changes since v1:
> 	* None
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 53 ++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 0d02599d8867..a63e8e81a8c4 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -761,6 +761,59 @@ soc: soc@0 {
>  		ranges = <0 0 0 0 0x10 0>;
>  		dma-ranges = <0 0 0 0 0x10 0>;
>  
> +		ethernet0: ethernet@20000 {
> +			compatible = "qcom,sc8280xp-ethqos";
> +			reg = <0x0 0x00020000 0x0 0x10000>,
> +				<0x0 0x00036000 0x0 0x100>;
Please correct the indentation here.

> +			reg-names = "stmmaceth", "rgmii";
> +
> +			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
> +				<&gcc GCC_EMAC0_SLV_AHB_CLK>,
> +				<&gcc GCC_EMAC0_PTP_CLK>,
> +				<&gcc GCC_EMAC0_RGMII_CLK>;
Please correct the indentation here.

> +			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
Please turn this into a vertical list.

> +
> +			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
Please correct the indentation here.

Same for the other node.

Konrad
> +			interrupt-names = "macirq", "eth_lpi";
> +			iommus = <&apps_smmu 0x4c0 0xf>;
> +			power-domains = <&gcc EMAC_0_GDSC>;
> +
> +			snps,tso;
> +			snps,pbl = <32>;
> +			rx-fifo-depth = <4096>;
> +			tx-fifo-depth = <4096>;
> +
> +			status = "disabled";
> +		};
> +
> +		ethernet1: ethernet@23000000 {
> +			compatible = "qcom,sc8280xp-ethqos";
> +			reg = <0x0 0x23000000 0x0 0x10000>,
> +				<0x0 0x23016000 0x0 0x100>;
> +			reg-names = "stmmaceth", "rgmii";
> +
> +			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
> +				<&gcc GCC_EMAC1_SLV_AHB_CLK>,
> +				<&gcc GCC_EMAC1_PTP_CLK>,
> +				<&gcc GCC_EMAC1_RGMII_CLK>;
> +			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
> +
> +			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "macirq", "eth_lpi";
> +
> +			iommus = <&apps_smmu 0x40 0xf>;
> +			power-domains = <&gcc EMAC_1_GDSC>;
> +
> +			snps,tso;
> +			snps,pbl = <32>;
> +			rx-fifo-depth = <4096>;
> +			tx-fifo-depth = <4096>;
> +
> +			status = "disabled";
> +		};
> +
>  		gcc: clock-controller@100000 {
>  			compatible = "qcom,gcc-sc8280xp";
>  			reg = <0x0 0x00100000 0x0 0x1f0000>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 0d02599d8867..a63e8e81a8c4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -761,6 +761,59 @@  soc: soc@0 {
 		ranges = <0 0 0 0 0x10 0>;
 		dma-ranges = <0 0 0 0 0x10 0>;
 
+		ethernet0: ethernet@20000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+				<0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				<&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC0_PTP_CLK>,
+				<&gcc GCC_EMAC0_RGMII_CLK>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+			iommus = <&apps_smmu 0x4c0 0xf>;
+			power-domains = <&gcc EMAC_0_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+				<0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				<&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC1_PTP_CLK>,
+				<&gcc GCC_EMAC1_RGMII_CLK>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			iommus = <&apps_smmu 0x40 0xf>;
+			power-domains = <&gcc EMAC_1_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sc8280xp";
 			reg = <0x0 0x00100000 0x0 0x1f0000>;