| Message ID | 20230401111934.130844-20-hal.feng@starfivetech.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC | expand |
Hi Hal, > From: Emil Renner Berthing <kernel@esmil.dk> > > Add initial device tree for the JH7110 RISC-V SoC by StarFive > Technology Ltd. > > Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com> > Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> > Co-developed-by: Hal Feng <hal.feng@starfivetech.com> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > arch/riscv/boot/dts/starfive/jh7110.dtsi | 509 +++++++++++++++++++++++ > 1 file changed, 509 insertions(+) > create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi > > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi > new file mode 100644 > index 000000000000..d484ecdf93f7 > --- /dev/null > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi > @@ -0,0 +1,509 @@ > +// SPDX-License-Identifier: GPL-2.0 OR MIT > +/* > + * Copyright (C) 2022 StarFive Technology Co., Ltd. > + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> > + */ > + > +/dts-v1/; > +#include <dt-bindings/clock/starfive,jh7110-crg.h> > +#include <dt-bindings/reset/starfive,jh7110-crg.h> > + > +/ { > + compatible = "starfive,jh7110"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + S7_0: cpu@0 { > + compatible = "sifive,s7", "riscv"; > + reg = <0>; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <8192>; > + d-tlb-sets = <1>; > + d-tlb-size = <40>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <16384>; > + i-tlb-sets = <1>; > + i-tlb-size = <40>; > + mmu-type = "riscv,sv39"; > + next-level-cache = <&ccache>; > + riscv,isa = "rv64imac_zba_zbb"; > + tlb-split; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + > + U74_1: cpu@1 { > + compatible = "sifive,u74-mc", "riscv"; > + reg = <1>; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <40>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <40>; > + mmu-type = "riscv,sv39"; > + next-level-cache = <&ccache>; > + riscv,isa = "rv64imafdc_zba_zbb"; > + tlb-split; > + > + cpu1_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + > + U74_2: cpu@2 { > + compatible = "sifive,u74-mc", "riscv"; > + reg = <2>; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <40>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <40>; > + mmu-type = "riscv,sv39"; > + next-level-cache = <&ccache>; > + riscv,isa = "rv64imafdc_zba_zbb"; > + tlb-split; > + > + cpu2_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + > + U74_3: cpu@3 { > + compatible = "sifive,u74-mc", "riscv"; > + reg = <3>; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <40>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <40>; > + mmu-type = "riscv,sv39"; > + next-level-cache = <&ccache>; > + riscv,isa = "rv64imafdc_zba_zbb"; > + tlb-split; > + > + cpu3_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + > + U74_4: cpu@4 { > + compatible = "sifive,u74-mc", "riscv"; > + reg = <4>; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <40>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <40>; > + mmu-type = "riscv,sv39"; > + next-level-cache = <&ccache>; > + riscv,isa = "rv64imafdc_zba_zbb"; > + tlb-split; > + > + cpu4_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&S7_0>; > + }; > + > + core1 { > + cpu = <&U74_1>; > + }; > + > + core2 { > + cpu = <&U74_2>; > + }; > + > + core3 { > + cpu = <&U74_3>; > + }; > + > + core4 { > + cpu = <&U74_4>; > + }; > + }; > + }; > + }; > + > + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { > + compatible = "fixed-clock"; > + clock-output-names = "gmac0_rgmii_rxin"; > + #clock-cells = <0>; > + }; > + > + gmac0_rmii_refin: gmac0-rmii-refin-clock { > + compatible = "fixed-clock"; > + clock-output-names = "gmac0_rmii_refin"; > + #clock-cells = <0>; > + }; > + > + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { > + compatible = "fixed-clock"; > + clock-output-names = "gmac1_rgmii_rxin"; > + #clock-cells = <0>; > + }; > + > + gmac1_rmii_refin: gmac1-rmii-refin-clock { > + compatible = "fixed-clock"; > + clock-output-names = "gmac1_rmii_refin"; > + #clock-cells = <0>; > + }; > + > + i2srx_bclk_ext: i2srx-bclk-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "i2srx_bclk_ext"; > + #clock-cells = <0>; > + }; > + > + i2srx_lrck_ext: i2srx-lrck-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "i2srx_lrck_ext"; > + #clock-cells = <0>; > + }; > + > + i2stx_bclk_ext: i2stx-bclk-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "i2stx_bclk_ext"; > + #clock-cells = <0>; > + }; > + > + i2stx_lrck_ext: i2stx-lrck-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "i2stx_lrck_ext"; > + #clock-cells = <0>; > + }; > + > + mclk_ext: mclk-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "mclk_ext"; > + #clock-cells = <0>; > + }; > + > + osc: oscillator { > + compatible = "fixed-clock"; > + clock-output-names = "osc"; > + #clock-cells = <0>; > + }; > + > + rtc_osc: rtc-oscillator { > + compatible = "fixed-clock"; > + clock-output-names = "rtc_osc"; > + #clock-cells = <0>; > + }; > + > + tdm_ext: tdm-ext-clock { > + compatible = "fixed-clock"; > + clock-output-names = "tdm_ext"; > + #clock-cells = <0>; > + }; > + > + soc { > + compatible = "simple-bus"; > + interrupt-parent = <&plic>; Do we really need this interrupt-parent? Seems it is causing a dependency cycle: platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000 And seems fu740 dts doesn't have this. Best regards, Shengyu > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clint: timer@2000000 { > + compatible = "starfive,jh7110-clint", "sifive,clint0"; > + reg = <0x0 0x2000000 0x0 0x10000>; > + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, > + <&cpu1_intc 3>, <&cpu1_intc 7>, > + <&cpu2_intc 3>, <&cpu2_intc 7>, > + <&cpu3_intc 3>, <&cpu3_intc 7>, > + <&cpu4_intc 3>, <&cpu4_intc 7>; > + }; > + > + ccache: cache-controller@2010000 { > + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; > + reg = <0x0 0x2010000 0x0 0x4000>; > + interrupts = <1>, <3>, <4>, <2>; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <2048>; > + cache-size = <2097152>; > + cache-unified; > + }; > + > + plic: interrupt-controller@c000000 { > + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + interrupts-extended = <&cpu0_intc 11>, > + <&cpu1_intc 11>, <&cpu1_intc 9>, > + <&cpu2_intc 11>, <&cpu2_intc 9>, > + <&cpu3_intc 11>, <&cpu3_intc 9>, > + <&cpu4_intc 11>, <&cpu4_intc 9>; > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <0>; > + riscv,ndev = <136>; > + }; > + > + uart0: serial@10000000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x10000000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, > + <&syscrg JH7110_SYSCLK_UART0_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART0_APB>; > + interrupts = <32>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + uart1: serial@10010000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x10010000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, > + <&syscrg JH7110_SYSCLK_UART1_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART1_APB>; > + interrupts = <33>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + uart2: serial@10020000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x10020000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, > + <&syscrg JH7110_SYSCLK_UART2_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART2_APB>; > + interrupts = <34>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + i2c0: i2c@10030000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x10030000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C0_APB>; > + interrupts = <35>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@10040000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x10040000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C1_APB>; > + interrupts = <36>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@10050000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x10050000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C2_APB>; > + interrupts = <37>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + uart3: serial@12000000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x12000000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, > + <&syscrg JH7110_SYSCLK_UART3_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART3_APB>; > + interrupts = <45>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + uart4: serial@12010000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x12010000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, > + <&syscrg JH7110_SYSCLK_UART4_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART4_APB>; > + interrupts = <46>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + uart5: serial@12020000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x0 0x12020000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, > + <&syscrg JH7110_SYSCLK_UART5_APB>; > + clock-names = "baudclk", "apb_pclk"; > + resets = <&syscrg JH7110_SYSRST_UART5_APB>; > + interrupts = <47>; > + reg-io-width = <4>; > + reg-shift = <2>; > + status = "disabled"; > + }; > + > + i2c3: i2c@12030000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x12030000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C3_APB>; > + interrupts = <48>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@12040000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x12040000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C4_APB>; > + interrupts = <49>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c5: i2c@12050000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x12050000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C5_APB>; > + interrupts = <50>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c6: i2c@12060000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x12060000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; > + clock-names = "ref"; > + resets = <&syscrg JH7110_SYSRST_I2C6_APB>; > + interrupts = <51>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + syscrg: clock-controller@13020000 { > + compatible = "starfive,jh7110-syscrg"; > + reg = <0x0 0x13020000 0x0 0x10000>; > + clocks = <&osc>, <&gmac1_rmii_refin>, > + <&gmac1_rgmii_rxin>, > + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, > + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, > + <&tdm_ext>, <&mclk_ext>; > + clock-names = "osc", "gmac1_rmii_refin", > + "gmac1_rgmii_rxin", > + "i2stx_bclk_ext", "i2stx_lrck_ext", > + "i2srx_bclk_ext", "i2srx_lrck_ext", > + "tdm_ext", "mclk_ext"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + sysgpio: pinctrl@13040000 { > + compatible = "starfive,jh7110-sys-pinctrl"; > + reg = <0x0 0x13040000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; > + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; > + interrupts = <86>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + aoncrg: clock-controller@17000000 { > + compatible = "starfive,jh7110-aoncrg"; > + reg = <0x0 0x17000000 0x0 0x10000>; > + clocks = <&osc>, <&gmac0_rmii_refin>, > + <&gmac0_rgmii_rxin>, > + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, > + <&syscrg JH7110_SYSCLK_APB_BUS>, > + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>, > + <&rtc_osc>; > + clock-names = "osc", "gmac0_rmii_refin", > + "gmac0_rgmii_rxin", "stg_axiahb", > + "apb_bus", "gmac0_gtxclk", > + "rtc_osc"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + aongpio: pinctrl@17020000 { > + compatible = "starfive,jh7110-aon-pinctrl"; > + reg = <0x0 0x17020000 0x0 0x10000>; > + resets = <&aoncrg JH7110_AONRST_IOMUX>; > + interrupts = <85>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + }; > +};
On Sun, 7 May 2023 18:03:19 +0800, Shengyu Qu wrote: > Hi Hal, >> From: Emil Renner Berthing <kernel@esmil.dk> >> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> new file mode 100644 >> index 000000000000..d484ecdf93f7 >> --- /dev/null >> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> @@ -0,0 +1,509 @@ >> +// SPDX-License-Identifier: GPL-2.0 OR MIT >> +/* >> + * Copyright (C) 2022 StarFive Technology Co., Ltd. >> + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> >> + */ >> + >> +/dts-v1/; >> +#include <dt-bindings/clock/starfive,jh7110-crg.h> >> +#include <dt-bindings/reset/starfive,jh7110-crg.h> >> + >> +/ { [...] >> + >> + soc { >> + compatible = "simple-bus"; >> + interrupt-parent = <&plic>; > > Do we really need this interrupt-parent? Seems it is causing a dependency cycle: > > platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000 > > And seems fu740 dts doesn't have this. Sorry to reply too late. If we drop this line, we need to add 'interrupt-parent' to every node which uses interrupt. And I found some other platform did the same such as arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi arch/riscv/boot/dts/canaan/k210.dtsi arch/riscv/boot/dts/renesas/r9a07g043f.dtsi Best regards, Hal > >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + clint: timer@2000000 { >> + compatible = "starfive,jh7110-clint", "sifive,clint0"; >> + reg = <0x0 0x2000000 0x0 0x10000>; >> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, >> + <&cpu1_intc 3>, <&cpu1_intc 7>, >> + <&cpu2_intc 3>, <&cpu2_intc 7>, >> + <&cpu3_intc 3>, <&cpu3_intc 7>, >> + <&cpu4_intc 3>, <&cpu4_intc 7>; >> + }; >> + >> + ccache: cache-controller@2010000 { >> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; >> + reg = <0x0 0x2010000 0x0 0x4000>; >> + interrupts = <1>, <3>, <4>, <2>; >> + cache-block-size = <64>; >> + cache-level = <2>; >> + cache-sets = <2048>; >> + cache-size = <2097152>; >> + cache-unified; >> + }; >> + >> + plic: interrupt-controller@c000000 { >> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; >> + reg = <0x0 0xc000000 0x0 0x4000000>; >> + interrupts-extended = <&cpu0_intc 11>, >> + <&cpu1_intc 11>, <&cpu1_intc 9>, >> + <&cpu2_intc 11>, <&cpu2_intc 9>, >> + <&cpu3_intc 11>, <&cpu3_intc 9>, >> + <&cpu4_intc 11>, <&cpu4_intc 9>; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + #address-cells = <0>; >> + riscv,ndev = <136>; >> + }; >> + >> + uart0: serial@10000000 { >> + compatible = "snps,dw-apb-uart"; >> + reg = <0x0 0x10000000 0x0 0x10000>; >> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, >> + <&syscrg JH7110_SYSCLK_UART0_APB>; >> + clock-names = "baudclk", "apb_pclk"; >> + resets = <&syscrg JH7110_SYSRST_UART0_APB>; >> + interrupts = <32>; >> + reg-io-width = <4>; >> + reg-shift = <2>; >> + status = "disabled"; >> + }; >> + [...]
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi new file mode 100644 index 000000000000..d484ecdf93f7 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include <dt-bindings/clock/starfive,jh7110-crg.h> +#include <dt-bindings/reset/starfive,jh7110-crg.h> + +/ { + compatible = "starfive,jh7110"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + S7_0: cpu@0 { + compatible = "sifive,s7", "riscv"; + reg = <0>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <8192>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <16384>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imac_zba_zbb"; + tlb-split; + status = "disabled"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_1: cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_2: cpu@2 { + compatible = "sifive,u74-mc", "riscv"; + reg = <2>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu2_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_3: cpu@3 { + compatible = "sifive,u74-mc", "riscv"; + reg = <3>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu3_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_4: cpu@4 { + compatible = "sifive,u74-mc", "riscv"; + reg = <4>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu4_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&S7_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + + core2 { + cpu = <&U74_2>; + }; + + core3 { + cpu = <&U74_3>; + }; + + core4 { + cpu = <&U74_4>; + }; + }; + }; + }; + + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac0_rmii_refin: gmac0-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rmii_refin"; + #clock-cells = <0>; + }; + + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac1_rmii_refin: gmac1-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rmii_refin"; + #clock-cells = <0>; + }; + + i2srx_bclk_ext: i2srx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_bclk_ext"; + #clock-cells = <0>; + }; + + i2srx_lrck_ext: i2srx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_lrck_ext"; + #clock-cells = <0>; + }; + + i2stx_bclk_ext: i2stx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_bclk_ext"; + #clock-cells = <0>; + }; + + i2stx_lrck_ext: i2stx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_lrck_ext"; + #clock-cells = <0>; + }; + + mclk_ext: mclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "mclk_ext"; + #clock-cells = <0>; + }; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc"; + #clock-cells = <0>; + }; + + rtc_osc: rtc-oscillator { + compatible = "fixed-clock"; + clock-output-names = "rtc_osc"; + #clock-cells = <0>; + }; + + tdm_ext: tdm-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "tdm_ext"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: timer@2000000 { + compatible = "starfive,jh7110-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + ccache: cache-controller@2010000 { + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; + reg = <0x0 0x2010000 0x0 0x4000>; + interrupts = <1>, <3>, <4>, <2>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <2048>; + cache-size = <2097152>; + cache-unified; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <0>; + riscv,ndev = <136>; + }; + + uart0: serial@10000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, + <&syscrg JH7110_SYSCLK_UART0_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART0_APB>; + interrupts = <32>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@10010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, + <&syscrg JH7110_SYSCLK_UART1_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART1_APB>; + interrupts = <33>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@10020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, + <&syscrg JH7110_SYSCLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART2_APB>; + interrupts = <34>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@10030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C0_APB>; + interrupts = <35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@10040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C1_APB>; + interrupts = <36>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@10050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C2_APB>; + interrupts = <37>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@12000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, + <&syscrg JH7110_SYSCLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART3_APB>; + interrupts = <45>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@12010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, + <&syscrg JH7110_SYSCLK_UART4_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART4_APB>; + interrupts = <46>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@12020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, + <&syscrg JH7110_SYSCLK_UART5_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART5_APB>; + interrupts = <47>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c3: i2c@12030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C3_APB>; + interrupts = <48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@12040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C4_APB>; + interrupts = <49>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@12050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C5_APB>; + interrupts = <50>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@12060000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12060000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C6_APB>; + interrupts = <51>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + syscrg: clock-controller@13020000 { + compatible = "starfive,jh7110-syscrg"; + reg = <0x0 0x13020000 0x0 0x10000>; + clocks = <&osc>, <&gmac1_rmii_refin>, + <&gmac1_rgmii_rxin>, + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, + <&tdm_ext>, <&mclk_ext>; + clock-names = "osc", "gmac1_rmii_refin", + "gmac1_rgmii_rxin", + "i2stx_bclk_ext", "i2stx_lrck_ext", + "i2srx_bclk_ext", "i2srx_lrck_ext", + "tdm_ext", "mclk_ext"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sysgpio: pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x0 0x13040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + aoncrg: clock-controller@17000000 { + compatible = "starfive,jh7110-aoncrg"; + reg = <0x0 0x17000000 0x0 0x10000>; + clocks = <&osc>, <&gmac0_rmii_refin>, + <&gmac0_rgmii_rxin>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_APB_BUS>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>, + <&rtc_osc>; + clock-names = "osc", "gmac0_rmii_refin", + "gmac0_rgmii_rxin", "stg_axiahb", + "apb_bus", "gmac0_gtxclk", + "rtc_osc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + aongpio: pinctrl@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x0 0x17020000 0x0 0x10000>; + resets = <&aoncrg JH7110_AONRST_IOMUX>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; +};