[v20] clk: npcm8xx: add clock controller

Commit Message

Tomer Maimon Sept. 28, 2023, 10:40 p.m. UTC

Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
generates and supplies clocks to all modules within the BMC.

Signed-off-by: Tomer Maimon <[e-mail]>
Acked-by: Joel Stanley <[e-mail]>
---
Changes since version 19:
 - Remove unnecessary free command.
 - Defining pr_fmt().
 - Using dev_err_probe.
 - Return zero in the end of the probe function.

Changes since version 18:
 - NPCM8XX clock driver did not changed from version 18 only build and tested under kernel 6.6-rc1.

Changes since version 17:
 - NPCM8XX clock driver did not changed from version 17 only build and tested under kernel 6.5-rc3.

Changes since version 16:
 - NPCM8XX clock driver
	- Using devm_kzalloc instead kzalloc.
	- Remove unnecessary parenthesis.
	- Modify incorrect spelling.

Changes since version 15:
 - NPCM8XX clock driver
	- Remove unused regs parameter from npcm8xx_pll_data structure.
	- Using index and clk_hw parameters to set the clock parent in the clock structures.

Changes since version 14:
 - NPCM8XX clock driver
	- Remove unnecessary register definitions.
	- Remove the internal reference clock, instead use the external DT reference clock.
	- rearrange the driver.
	- using .names parameter in DT to define clock (refclk).

Changes since version 13:
 - NPCM8XX clock driver
	- Remove unnecessary definitions and add module.h define
	- Use in clk_parent_data struct.fw_name and .name.
	- Add module_exit function.
	- Add const to divider clock names.
	- Add MODULE_DESCRIPTION and MODULE_LICENSE

Changes since version 12:
 - NPCM8XX clock driver
	- Use clk_parent_data in mux and div clock structure.
	- Add const to mux tables.
	- Using devm_clk_hw_register_fixed_rate function.
	- use only .name clk_parent_data instead .name and .fw_name.
	- Modify mask values in mux clocks. 

Changes since version 11:
 - NPCM8XX clock driver
	- Modify Kconfig help.
	- Modify loop variable to unsigned int.

Changes since version 11:
 - NPCM8XX clock driver
	- Modify Kconfig help.
	- Modify loop variable to unsigned int.

Changes since version 10:
 - NPCM8XX clock driver
	- Fix const warning.

Changes since version 9:
 - NPCM8XX clock driver
	- Move configuration place.
	- Using clk_parent_data instead of parent_name
	- using devm_ioremap instead of ioremap. deeply sorry, I know we had
	 a long discussion on what should the driver use, from other examples 
	 (also in other clock drivers) I see the combination of 
	 platform_get_resource and devm_ioremap are commonly used and it answer
	 the reset and clock needs.

Changes since version 8:
 - NPCM8XX clock driver
	- Move configuration place.
	- Add space before and aftre '{' '}'.
	- Handle devm_of_clk_add_hw_provider function error.

Changes since version 7:
 - NPCM8XX clock driver
	- The clock and reset registers using the same memory region, 
	  due to it the clock driver should claim the ioremap directly 
	  without checking the memory region.

Changes since version 5:
 - NPCM8XX clock driver
	- Remove refclk if devm_of_clk_add_hw_provider function failed.

Changes since version 4:
 - NPCM8XX clock driver
	- Use the same quote in the dt-binding file.

Changes since version 3:
 - NPCM8XX clock driver
	- Rename NPCM8xx clock dt-binding header file.
	- Remove unused structures.
	- Improve Handling the clocks registration.

Changes since version 2:
 - NPCM8XX clock driver
	- Add debug new line.
	- Add 25M fixed rate clock.
	- Remove unused clocks and clock name from dt-binding.

Changes since version 1:
 - NPCM8XX clock driver
	- Modify dt-binding.
	- Remove unsed definition and include.
	- Include alphabetically.
	- Use clock devm.

 drivers/clk/Kconfig       |   8 +
 drivers/clk/Makefile      |   1 +
 drivers/clk/clk-npcm8xx.c | 547 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 556 insertions(+)
 create mode 100644 drivers/clk/clk-npcm8xx.c

Comments

Stephen Boyd Oct. 6, 2023, 11:50 p.m. UTC | #1

Quoting Tomer Maimon (2023-09-28 15:40:51)
> diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> new file mode 100644
> index 000000000000..e575a8676ca3
> --- /dev/null
> +++ b/drivers/clk/clk-npcm8xx.c
> @@ -0,0 +1,547 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
[...]
> +
> +/* configurable dividers: */
> +static const struct npcm8xx_clk_div_data npcm8xx_divs[] = {
> +       { NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC,
> +       { .name = NPCM8XX_CLK_S_PRE_ADC, .index = -1 },
> +       CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC },

Please format this some other way. I assume one line means one clk, but
here it is actually three lines. Perhaps something like this?

> +       {
> +		NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC,
> +       	{ .name = NPCM8XX_CLK_S_PRE_ADC, .index = -1 },
> +       	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC
> +	  },

Please stop using the .name member of struct clk_parent_data. That
member is only there to support drivers that are migrating from a
binding that didn't specify the parents of clks that are outside of the
clk controller with the clocks property in their DT node. I see that the
dts exists upstream, but luckily we don't have a driver merged, so we're
free to change the binding to specify clks external to the node. The
.fw_name member will match a 'clock-names' element for the registering
driver's node. The .index member will match the index in the 'clocks'
property. Neither of those properties exist in the nuvoton,npcm845-clk
DT binding, so neither of those members shall be present. This means
that either the binding needs to be updated, or the clk_parent_data
structure should be replaced with clk_hw pointers to describe parents.
I'm going to guess that there aren't any external clk parents, so to
keep things simple this driver should change to use direct clk_hw
pointers to describe topology.

> +       { NPCM8XX_CLKDIV1, 26, 2, NPCM8XX_CLK_S_AHB, { .hw = &hw_pre_clk },
> +       CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB },
> +       { NPCM8XX_CLKDIV1, 21, 5, NPCM8XX_CLK_S_PRE_ADC,
> +       { .hw = &npcm8xx_muxes[6].hw }, CLK_DIVIDER_READ_ONLY, 0, -1 },
> +       { NPCM8XX_CLKDIV1, 16, 5, NPCM8XX_CLK_S_UART,
> +       { .hw = &npcm8xx_muxes[3].hw }, 0, 0, NPCM8XX_CLK_UART },
> +       { NPCM8XX_CLKDIV1, 11, 5, NPCM8XX_CLK_S_MMC,
> +       { .hw = &npcm8xx_muxes[2].hw }, CLK_DIVIDER_READ_ONLY, 0,
> +       NPCM8XX_CLK_MMC },
> +       { NPCM8XX_CLKDIV1, 6, 5, NPCM8XX_CLK_S_SPI3,
> +       { .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB }, 0, 0,
> +       NPCM8XX_CLK_SPI3 },
> +       { NPCM8XX_CLKDIV1, 2, 4, NPCM8XX_CLK_S_PCI,
> +       { .hw = &npcm8xx_muxes[7].hw }, CLK_DIVIDER_READ_ONLY, 0,
> +       NPCM8XX_CLK_PCI },

BTW, I looked at the dts file upstream (nuvoton-common-npcm8xx.dtsi).
The reset and clock controller start at the same address, which can only
mean that they're actually the same device. The two nodes should be
combined into one node and one driver should match that compatible so
that one IO mapping is made for the entire clock and reset contoller
register space. If you want, that driver can make two auxiliary device
drivers for the reset and clk parts of the io space and then those two
drivers can reside in drivers/reset and drivers/clk. I don't know where
the driver goes that matches the compatible node though, probably in
drivers/soc. This allows us to properly model the logical components
that make up the device in hardware (clks and resets) while also
allowing any device specific things for that entire register space to
live in the soc driver. For example, if some power domain needs to be
enabled to access that register space it would be attached to the soc
driver.

Tomer Maimon Nov. 29, 2023, 9:47 a.m. UTC | #2

Hi Stephen,

Thanks for your comments and sorry for the late reply.

On Sat, 7 Oct 2023 at 02:50, Stephen Boyd <[e-mail]> wrote:
>
> Quoting Tomer Maimon (2023-09-28 15:40:51)
> > diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
> > new file mode 100644
> > index 000000000000..e575a8676ca3
> > --- /dev/null
> > +++ b/drivers/clk/clk-npcm8xx.c
> > @@ -0,0 +1,547 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> [...]
> > +
> > +/* configurable dividers: */
> > +static const struct npcm8xx_clk_div_data npcm8xx_divs[] = {
> > +       { NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC,
> > +       { .name = NPCM8XX_CLK_S_PRE_ADC, .index = -1 },
> > +       CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC },
>
> Please format this some other way. I assume one line means one clk, but
> here it is actually three lines. Perhaps something like this?
Ready in V21
>
> > +       {
> > +             NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC,
> > +             { .name = NPCM8XX_CLK_S_PRE_ADC, .index = -1 },
> > +             CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC
> > +       },
>
> Please stop using the .name member of struct clk_parent_data. That
> member is only there to support drivers that are migrating from a
> binding that didn't specify the parents of clks that are outside of the
> clk controller with the clocks property in their DT node. I see that the
> dts exists upstream, but luckily we don't have a driver merged, so we're
> free to change the binding to specify clks external to the node. The
> .fw_name member will match a 'clock-names' element for the registering
> driver's node. The .index member will match the index in the 'clocks'
> property. Neither of those properties exist in the nuvoton,npcm845-clk
> DT binding, so neither of those members shall be present. This means
> that either the binding needs to be updated, or the clk_parent_data
> structure should be replaced with clk_hw pointers to describe parents.
> I'm going to guess that there aren't any external clk parents, so to
> keep things simple this driver should change to use direct clk_hw
> pointers to describe topology.
Ready in V21
>
> > +       { NPCM8XX_CLKDIV1, 26, 2, NPCM8XX_CLK_S_AHB, { .hw = &hw_pre_clk },
> > +       CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB },
> > +       { NPCM8XX_CLKDIV1, 21, 5, NPCM8XX_CLK_S_PRE_ADC,
> > +       { .hw = &npcm8xx_muxes[6].hw }, CLK_DIVIDER_READ_ONLY, 0, -1 },
> > +       { NPCM8XX_CLKDIV1, 16, 5, NPCM8XX_CLK_S_UART,
> > +       { .hw = &npcm8xx_muxes[3].hw }, 0, 0, NPCM8XX_CLK_UART },
> > +       { NPCM8XX_CLKDIV1, 11, 5, NPCM8XX_CLK_S_MMC,
> > +       { .hw = &npcm8xx_muxes[2].hw }, CLK_DIVIDER_READ_ONLY, 0,
> > +       NPCM8XX_CLK_MMC },
> > +       { NPCM8XX_CLKDIV1, 6, 5, NPCM8XX_CLK_S_SPI3,
> > +       { .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB }, 0, 0,
> > +       NPCM8XX_CLK_SPI3 },
> > +       { NPCM8XX_CLKDIV1, 2, 4, NPCM8XX_CLK_S_PCI,
> > +       { .hw = &npcm8xx_muxes[7].hw }, CLK_DIVIDER_READ_ONLY, 0,
> > +       NPCM8XX_CLK_PCI },
>
> BTW, I looked at the dts file upstream (nuvoton-common-npcm8xx.dtsi).
> The reset and clock controller start at the same address, which can only
> mean that they're actually the same device. The two nodes should be
unfortunately, It is two services (reset and clock) that are handled
in the same memory space.
> combined into one node and one driver should match that compatible so
> that one IO mapping is made for the entire clock and reset contoller
> register space. If you want, that driver can make two auxiliary device
> drivers for the reset and clk parts of the io space and then those two
> drivers can reside in drivers/reset and drivers/clk. I don't know where
> the driver goes that matches the compatible node though, probably in
> drivers/soc. This allows us to properly model the logical components
> that make up the device in hardware (clks and resets) while also
> allowing any device specific things for that entire register space to
> live in the soc driver. For example, if some power domain needs to be
> enabled to access that register space it would be attached to the soc
> driver.
Sorry I didn't understand, do you mean to have one driver that handles
the clock and the reset modules and will sis under driver/soc
or one driver that handles the reset and clock IO space?

What about using regmap to handle the clock and the reset? for this,
the NPCM clock driver will use a unique clock setting like it is done
in Tegra clk.
https://elixir.bootlin.com/linux/v6.7-rc2/source/drivers/clk/tegra/clk-divider.c
instead of using clk_divide and clk_mux default services.

Thanks,

Tomer

Patch

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c30099866174..9bc5f2dfc7e2 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -325,6 +325,14 @@  config COMMON_CLK_LOCHNAGAR
 	  This driver supports the clocking features of the Cirrus Logic
 	  Lochnagar audio development board.
 
+config COMMON_CLK_NPCM8XX
+	tristate "Clock driver for the NPCM8XX SoC Family"
+	depends on ARCH_NPCM || COMPILE_TEST
+	help
+	  This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family,
+	  all the clocks are initialized by the bootloader, so this driver
+	  allows only reading of current settings directly from the hardware.
+
 config COMMON_CLK_LOONGSON2
 	bool "Clock driver for Loongson-2 SoC"
 	depends on LOONGARCH || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 18969cbd4bb1..e2cbc6cceb8c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -51,6 +51,7 @@  obj-$(CONFIG_ARCH_MILBEAUT_M10V)	+= clk-milbeaut.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-npcm7xx.o
+obj-$(CONFIG_COMMON_CLK_NPCM8XX)	+= clk-npcm8xx.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
 obj-$(CONFIG_CLK_LS1028A_PLLDIG)	+= clk-plldig.o
diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
new file mode 100644
index 000000000000..e575a8676ca3
--- /dev/null
+++ b/drivers/clk/clk-npcm8xx.c
@@ -0,0 +1,547 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NPCM8xx Clock Generator
+ * All the clocks are initialized by the bootloader, so this driver allows only
+ * reading of current settings directly from the hardware.
+ *
+ * Copyright (C) 2020 Nuvoton Technologies
+ * Author: Tomer Maimon <[e-mail]>
+ */
+
+#define pr_fmt(fmt) "npcm8xx_clk: " fmt
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+
+/* npcm8xx clock registers*/
+#define NPCM8XX_CLKSEL		0x04
+#define NPCM8XX_CLKDIV1		0x08
+#define NPCM8XX_CLKDIV2		0x2C
+#define NPCM8XX_CLKDIV3		0x58
+#define NPCM8XX_CLKDIV4		0x7C
+#define NPCM8XX_PLLCON0		0x0C
+#define NPCM8XX_PLLCON1		0x10
+#define NPCM8XX_PLLCON2		0x54
+#define NPCM8XX_PLLCONG		0x60
+#define NPCM8XX_THRTL_CNT	0xC0
+
+#define PLLCON_LOKI	BIT(31)
+#define PLLCON_LOKS	BIT(30)
+#define PLLCON_FBDV	GENMASK(27, 16)
+#define PLLCON_OTDV2	GENMASK(15, 13)
+#define PLLCON_PWDEN	BIT(12)
+#define PLLCON_OTDV1	GENMASK(10, 8)
+#define PLLCON_INDV	GENMASK(5, 0)
+
+struct npcm8xx_clk_pll {
+	void __iomem	*pllcon;
+	unsigned int	id;
+	const char	*name;
+	unsigned long	flags;
+	struct clk_hw	hw;
+};
+
+#define to_npcm8xx_clk_pll(_hw) container_of(_hw, struct npcm8xx_clk_pll, hw)
+
+struct npcm8xx_pll_data {
+	const char *name;
+	struct clk_parent_data parent;
+	unsigned int reg;
+	unsigned long flags;
+	struct clk_hw hw;
+};
+
+struct npcm8xx_clk_div_data {
+	u32 reg;
+	u8 shift;
+	u8 width;
+	const char *name;
+	const struct clk_parent_data parent_data;
+	u8 clk_divider_flags;
+	unsigned long flags;
+	int onecell_idx;
+};
+
+struct npcm8xx_clk_mux_data {
+	u8 shift;
+	u32 mask;
+	const u32 *table;
+	const char *name;
+	const struct clk_parent_data *parent_data;
+	u8 num_parents;
+	unsigned long flags;
+	struct clk_hw hw;
+};
+
+/* external clock definition */
+#define NPCM8XX_CLK_S_REFCLK	"refclk"
+
+/* pll definition */
+#define NPCM8XX_CLK_S_PLL0	"pll0"
+#define NPCM8XX_CLK_S_PLL1	"pll1"
+#define NPCM8XX_CLK_S_PLL2	"pll2"
+#define NPCM8XX_CLK_S_PLL_GFX	"pll_gfx"
+
+/* early divider definition */
+#define NPCM8XX_CLK_S_PLL2_DIV2		"pll2_div2"
+#define NPCM8XX_CLK_S_PLL_GFX_DIV2	"pll_gfx_div2"
+#define NPCM8XX_CLK_S_PLL1_DIV2		"pll1_div2"
+
+/* mux definition */
+#define NPCM8XX_CLK_S_CPU_MUX     "cpu_mux"
+#define NPCM8XX_CLK_S_PIX_MUX     "gfx_pixel_mux"
+#define NPCM8XX_CLK_S_SD_MUX      "sd_mux"
+#define NPCM8XX_CLK_S_UART_MUX    "uart_mux"
+#define NPCM8XX_CLK_S_SU_MUX      "serial_usb_mux"
+#define NPCM8XX_CLK_S_MC_MUX      "mc_mux"
+#define NPCM8XX_CLK_S_ADC_MUX     "adc_mux"
+#define NPCM8XX_CLK_S_GFX_MUX     "gfx_mux"
+#define NPCM8XX_CLK_S_CLKOUT_MUX  "clkout_mux"
+#define NPCM8XX_CLK_S_GFXM_MUX    "gfxm_mux"
+#define NPCM8XX_CLK_S_DVC_MUX     "dvc_mux"
+#define NPCM8XX_CLK_S_RG_MUX	  "rg_mux"
+#define NPCM8XX_CLK_S_RCP_MUX	  "rcp_mux"
+
+/* div definition */
+#define NPCM8XX_CLK_S_MC          "mc"
+#define NPCM8XX_CLK_S_AXI         "axi"
+#define NPCM8XX_CLK_S_AHB         "ahb"
+#define NPCM8XX_CLK_S_SPI0        "spi0"
+#define NPCM8XX_CLK_S_SPI1        "spi1"
+#define NPCM8XX_CLK_S_SPI3        "spi3"
+#define NPCM8XX_CLK_S_SPIX        "spix"
+#define NPCM8XX_CLK_S_APB1        "apb1"
+#define NPCM8XX_CLK_S_APB2        "apb2"
+#define NPCM8XX_CLK_S_APB3        "apb3"
+#define NPCM8XX_CLK_S_APB4        "apb4"
+#define NPCM8XX_CLK_S_APB5        "apb5"
+#define NPCM8XX_CLK_S_APB19       "apb19"
+#define NPCM8XX_CLK_S_TOCK        "tock"
+#define NPCM8XX_CLK_S_CLKOUT      "clkout"
+#define NPCM8XX_CLK_S_PRE_ADC     "pre adc"
+#define NPCM8XX_CLK_S_UART        "uart"
+#define NPCM8XX_CLK_S_UART2       "uart2"
+#define NPCM8XX_CLK_S_TIMER       "timer"
+#define NPCM8XX_CLK_S_MMC         "mmc"
+#define NPCM8XX_CLK_S_SDHC        "sdhc"
+#define NPCM8XX_CLK_S_ADC         "adc"
+#define NPCM8XX_CLK_S_GFX         "gfx0_gfx1_mem"
+#define NPCM8XX_CLK_S_USBIF       "serial_usbif"
+#define NPCM8XX_CLK_S_USB_HOST    "usb_host"
+#define NPCM8XX_CLK_S_USB_BRIDGE  "usb_bridge"
+#define NPCM8XX_CLK_S_PCI         "pci"
+#define NPCM8XX_CLK_S_TH          "th"
+#define NPCM8XX_CLK_S_ATB         "atb"
+#define NPCM8XX_CLK_S_PRE_CLK     "pre_clk"
+#define NPCM8XX_CLK_S_RG	  "rg"
+#define NPCM8XX_CLK_S_RCP	  "rcp"
+
+static struct clk_hw hw_pll1_div2, hw_pll2_div2, hw_gfx_div2, hw_pre_clk;
+static struct npcm8xx_pll_data npcm8xx_pll_clks[] = {
+	{ NPCM8XX_CLK_S_PLL0, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON0, 0 },
+	{ NPCM8XX_CLK_S_PLL1, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON1, 0 },
+	{ NPCM8XX_CLK_S_PLL2, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCON2, 0 },
+	{ NPCM8XX_CLK_S_PLL_GFX, { .name = NPCM8XX_CLK_S_REFCLK }, NPCM8XX_PLLCONG, 0 },
+};
+
+static const u32 cpuck_mux_table[] = { 0, 1, 2, 7 };
+static const struct clk_parent_data cpuck_mux_parents[] = {
+	{ .hw = &npcm8xx_pll_clks[0].hw },
+	{ .hw = &npcm8xx_pll_clks[1].hw },
+	{ .index = 0 },
+	{ .hw = &npcm8xx_pll_clks[2].hw }
+};
+
+static const u32 pixcksel_mux_table[] = { 0, 2 };
+static const struct clk_parent_data pixcksel_mux_parents[] = {
+	{ .hw = &npcm8xx_pll_clks[3].hw },
+	{ .index = 0 }
+};
+
+static const u32 default_mux_table[] = { 0, 1, 2, 3 };
+static const struct clk_parent_data default_mux_parents[] = {
+	{ .hw = &npcm8xx_pll_clks[0].hw },
+	{ .hw = &npcm8xx_pll_clks[1].hw },
+	{ .index = 0 },
+	{ .hw = &hw_pll2_div2 }
+};
+
+static const u32 sucksel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data sucksel_mux_parents[] = {
+	{ .index = 0 },
+	{ .hw = &hw_pll2_div2 }
+};
+
+static const u32 mccksel_mux_table[] = { 0, 2 };
+static const struct clk_parent_data mccksel_mux_parents[] = {
+	{ .hw = &hw_pll1_div2 },
+	{ .index = 0 }
+};
+
+static const u32 clkoutsel_mux_table[] = { 0, 1, 2, 3, 4 };
+static const struct clk_parent_data clkoutsel_mux_parents[] = {
+	{ .hw = &npcm8xx_pll_clks[0].hw },
+	{ .hw = &npcm8xx_pll_clks[1].hw },
+	{ .index = 0 },
+	{ .hw = &hw_gfx_div2 },
+	{ .hw = &hw_pll2_div2 }
+};
+
+static const u32 gfxmsel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data gfxmsel_mux_parents[] = {
+	{ .index = 0 },
+	{ .hw = &npcm8xx_pll_clks[2].hw }
+};
+
+static const u32 dvcssel_mux_table[] = { 2, 3 };
+static const struct clk_parent_data dvcssel_mux_parents[] = {
+	{ .index = 0 },
+	{ .hw = &npcm8xx_pll_clks[2].hw }
+};
+
+static const u32 default3_mux_table[] = { 0, 1, 2 };
+static const struct clk_parent_data default3_mux_parents[] = {
+	{ .hw = &npcm8xx_pll_clks[0].hw },
+	{ .hw = &npcm8xx_pll_clks[1].hw },
+	{ .index = 0 }
+};
+
+static struct npcm8xx_clk_mux_data npcm8xx_muxes[] = {
+	{ 0, 3, cpuck_mux_table, NPCM8XX_CLK_S_CPU_MUX, cpuck_mux_parents,
+		ARRAY_SIZE(cpuck_mux_parents), CLK_IS_CRITICAL },
+	{ 4, 2, pixcksel_mux_table, NPCM8XX_CLK_S_PIX_MUX, pixcksel_mux_parents,
+		ARRAY_SIZE(pixcksel_mux_parents), 0 },
+	{ 6, 2, default_mux_table, NPCM8XX_CLK_S_SD_MUX, default_mux_parents,
+		ARRAY_SIZE(default_mux_parents), 0 },
+	{ 8, 2, default_mux_table, NPCM8XX_CLK_S_UART_MUX, default_mux_parents,
+		ARRAY_SIZE(default_mux_parents), 0 },
+	{ 10, 2, sucksel_mux_table, NPCM8XX_CLK_S_SU_MUX, sucksel_mux_parents,
+		ARRAY_SIZE(sucksel_mux_parents), 0 },
+	{ 12, 2, mccksel_mux_table, NPCM8XX_CLK_S_MC_MUX, mccksel_mux_parents,
+		ARRAY_SIZE(mccksel_mux_parents), 0 },
+	{ 14, 2, default_mux_table, NPCM8XX_CLK_S_ADC_MUX, default_mux_parents,
+		ARRAY_SIZE(default_mux_parents), 0 },
+	{ 16, 2, default_mux_table, NPCM8XX_CLK_S_GFX_MUX, default_mux_parents,
+		ARRAY_SIZE(default_mux_parents), 0 },
+	{ 18, 3, clkoutsel_mux_table, NPCM8XX_CLK_S_CLKOUT_MUX, clkoutsel_mux_parents,
+		ARRAY_SIZE(clkoutsel_mux_parents), 0 },
+	{ 21, 2, gfxmsel_mux_table, NPCM8XX_CLK_S_GFXM_MUX, gfxmsel_mux_parents,
+		ARRAY_SIZE(gfxmsel_mux_parents), 0 },
+	{ 23, 2, dvcssel_mux_table, NPCM8XX_CLK_S_DVC_MUX, dvcssel_mux_parents,
+		ARRAY_SIZE(dvcssel_mux_parents), 0 },
+	{ 25, 2, default3_mux_table, NPCM8XX_CLK_S_RG_MUX, default3_mux_parents,
+		ARRAY_SIZE(default3_mux_parents), 0 },
+	{ 27, 2, default3_mux_table, NPCM8XX_CLK_S_RCP_MUX, default3_mux_parents,
+		ARRAY_SIZE(default3_mux_parents), 0 },
+};
+
+/* configurable dividers: */
+static const struct npcm8xx_clk_div_data npcm8xx_divs[] = {
+	{ NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC,
+	{ .name = NPCM8XX_CLK_S_PRE_ADC, .index = -1 },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_ADC },
+	{ NPCM8XX_CLKDIV1, 26, 2, NPCM8XX_CLK_S_AHB, { .hw = &hw_pre_clk },
+	CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB },
+	{ NPCM8XX_CLKDIV1, 21, 5, NPCM8XX_CLK_S_PRE_ADC,
+	{ .hw = &npcm8xx_muxes[6].hw }, CLK_DIVIDER_READ_ONLY, 0, -1 },
+	{ NPCM8XX_CLKDIV1, 16, 5, NPCM8XX_CLK_S_UART,
+	{ .hw = &npcm8xx_muxes[3].hw }, 0, 0, NPCM8XX_CLK_UART },
+	{ NPCM8XX_CLKDIV1, 11, 5, NPCM8XX_CLK_S_MMC,
+	{ .hw = &npcm8xx_muxes[2].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_MMC },
+	{ NPCM8XX_CLKDIV1, 6, 5, NPCM8XX_CLK_S_SPI3,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB }, 0, 0,
+	NPCM8XX_CLK_SPI3 },
+	{ NPCM8XX_CLKDIV1, 2, 4, NPCM8XX_CLK_S_PCI,
+	{ .hw = &npcm8xx_muxes[7].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_PCI },
+
+	{ NPCM8XX_CLKDIV2, 30, 2, NPCM8XX_CLK_S_APB4,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB4 },
+	{ NPCM8XX_CLKDIV2, 28, 2, NPCM8XX_CLK_S_APB3,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB3 },
+	{ NPCM8XX_CLKDIV2, 26, 2, NPCM8XX_CLK_S_APB2,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB2 },
+	{ NPCM8XX_CLKDIV2, 24, 2, NPCM8XX_CLK_S_APB1,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB1 },
+	{ NPCM8XX_CLKDIV2, 22, 2, NPCM8XX_CLK_S_APB5,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_APB5 },
+	{ NPCM8XX_CLKDIV2, 16, 5, NPCM8XX_CLK_S_CLKOUT,
+	{ .hw = &npcm8xx_muxes[8].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_CLKOUT },
+	{ NPCM8XX_CLKDIV2, 13, 3, NPCM8XX_CLK_S_GFX,
+	{ .hw = &npcm8xx_muxes[7].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_GFX },
+	{ NPCM8XX_CLKDIV2, 8, 5, NPCM8XX_CLK_S_USB_BRIDGE,
+	{ .hw = &npcm8xx_muxes[4].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_SU },
+	{ NPCM8XX_CLKDIV2, 4, 4, NPCM8XX_CLK_S_USB_HOST,
+	{ .hw = &npcm8xx_muxes[4].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_SU48 },
+	{ NPCM8XX_CLKDIV2, 0, 4, NPCM8XX_CLK_S_SDHC,
+	{ .hw = &npcm8xx_muxes[2].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_SDHC },
+
+	{ NPCM8XX_CLKDIV3, 16, 8, NPCM8XX_CLK_S_SPI1,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI1 },
+	{ NPCM8XX_CLKDIV3, 11, 5, NPCM8XX_CLK_S_UART2,
+	{ .hw = &npcm8xx_muxes[3].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_UART2 },
+	{ NPCM8XX_CLKDIV3, 6, 5, NPCM8XX_CLK_S_SPI0,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI0 },
+	{ NPCM8XX_CLKDIV3, 1, 5, NPCM8XX_CLK_S_SPIX,
+	{ .fw_name = NPCM8XX_CLK_S_AHB, .name = NPCM8XX_CLK_S_AHB },
+	CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPIX },
+
+	{ NPCM8XX_CLKDIV4, 28, 4, NPCM8XX_CLK_S_RG,
+	{ .hw = &npcm8xx_muxes[11].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_RG },
+	{ NPCM8XX_CLKDIV4, 12, 4, NPCM8XX_CLK_S_RCP,
+	{ .hw = &npcm8xx_muxes[12].hw }, CLK_DIVIDER_READ_ONLY, 0,
+	NPCM8XX_CLK_RCP },
+
+	{ NPCM8XX_THRTL_CNT, 0, 2, NPCM8XX_CLK_S_TH,
+	{ .hw = &npcm8xx_muxes[0].hw },
+	CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_TH },
+};
+
+static unsigned long npcm8xx_clk_pll_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct npcm8xx_clk_pll *pll = to_npcm8xx_clk_pll(hw);
+	unsigned long fbdv, indv, otdv1, otdv2;
+	unsigned int val;
+	u64 ret;
+
+	if (parent_rate == 0) {
+		pr_debug("%s: parent rate is zero\n", __func__);
+		return 0;
+	}
+
+	val = readl_relaxed(pll->pllcon);
+
+	indv = FIELD_GET(PLLCON_INDV, val);
+	fbdv = FIELD_GET(PLLCON_FBDV, val);
+	otdv1 = FIELD_GET(PLLCON_OTDV1, val);
+	otdv2 = FIELD_GET(PLLCON_OTDV2, val);
+
+	ret = (u64)parent_rate * fbdv;
+	do_div(ret, indv * otdv1 * otdv2);
+
+	return ret;
+}
+
+static const struct clk_ops npcm8xx_clk_pll_ops = {
+	.recalc_rate = npcm8xx_clk_pll_recalc_rate,
+};
+
+static struct clk_hw *
+npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
+			 const char *name, const struct clk_parent_data *parent,
+			 unsigned long flags)
+{
+	struct npcm8xx_clk_pll *pll;
+	struct clk_init_data init = {};
+	int ret;
+
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &npcm8xx_clk_pll_ops;
+	init.parent_data = parent;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	pll->pllcon = pllcon;
+	pll->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &pll->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &pll->hw;
+}
+
+static DEFINE_SPINLOCK(npcm8xx_clk_lock);
+
+static int npcm8xx_clk_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *npcm8xx_clk_data;
+	struct device *dev = &pdev->dev;
+	void __iomem *clk_base;
+	struct resource *res;
+	struct clk_hw *hw;
+	unsigned int i;
+	int err;
+
+	npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
+							 NPCM8XX_NUM_CLOCKS),
+					GFP_KERNEL);
+	if (!npcm8xx_clk_data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	clk_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!clk_base)
+		return dev_err_probe(dev, -ENOMEM, "Failed to remap I/O memory\n");
+
+	npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
+
+	for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
+		npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+	/* Register plls */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_pll_clks); i++) {
+		struct npcm8xx_pll_data *pll_clk = &npcm8xx_pll_clks[i];
+
+		hw = npcm8xx_clk_register_pll(dev, clk_base + pll_clk->reg,
+					      pll_clk->name, &pll_clk->parent,
+					      pll_clk->flags);
+		if (IS_ERR(hw))
+			return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll\n");
+		pll_clk->hw = *hw;
+	}
+
+	/* Register fixed dividers */
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
+					       NPCM8XX_CLK_S_PLL1, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register fixed div\n");
+	hw_pll1_div2 = *hw;
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
+					       NPCM8XX_CLK_S_PLL2, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll2 div2\n");
+	hw_pll2_div2 = *hw;
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL_GFX_DIV2,
+					       NPCM8XX_CLK_S_PLL_GFX, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register gfx div2\n");
+	hw_gfx_div2 = *hw;
+
+	/* Register muxes */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
+		struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
+
+		hw = devm_clk_hw_register_mux_parent_data_table(dev,
+								mux_data->name,
+								mux_data->parent_data,
+								mux_data->num_parents,
+								mux_data->flags,
+								clk_base + NPCM8XX_CLKSEL,
+								mux_data->shift,
+								mux_data->mask,
+								0,
+								mux_data->table,
+								&npcm8xx_clk_lock);
+		if (IS_ERR(hw))
+			return dev_err_probe(dev, PTR_ERR(hw), "Can't register mux\n");
+		mux_data->hw = *hw;
+	}
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
+					       NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre clk div2\n");
+	hw_pre_clk = *hw;
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
+					       NPCM8XX_CLK_S_TH, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register axi div2\n");
+	npcm8xx_clk_data->hws[NPCM8XX_CLK_AXI] = hw;
+
+	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
+					       NPCM8XX_CLK_S_AXI, 0, 1, 2);
+	if (IS_ERR(hw))
+		return dev_err_probe(dev, PTR_ERR(hw), "Can't register atb div2\n");
+	npcm8xx_clk_data->hws[NPCM8XX_CLK_ATB] = hw;
+
+	/* Register clock dividers specified in npcm8xx_divs */
+	for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
+		const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
+
+		hw = clk_hw_register_divider_parent_data(dev, div_data->name,
+							 &div_data->parent_data,
+							 div_data->flags,
+							 clk_base + div_data->reg,
+							 div_data->shift,
+							 div_data->width,
+							 div_data->clk_divider_flags,
+							 &npcm8xx_clk_lock);
+		if (IS_ERR(hw)) {
+			dev_err(dev, "Can't register div table\n");
+			goto err_div_clk;
+		}
+
+		if (div_data->onecell_idx >= 0)
+			npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
+	}
+
+	err = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					  npcm8xx_clk_data);
+	if (err) {
+		dev_err(dev, "unable to add clk provider\n");
+		hw = ERR_PTR(err);
+		goto err_div_clk;
+	}
+
+	return 0;
+
+err_div_clk:
+	while (i--)
+		if (npcm8xx_divs[i].onecell_idx >= 0)
+			clk_hw_unregister_divider(npcm8xx_clk_data->hws[npcm8xx_divs[i].onecell_idx]);
+
+	return PTR_ERR(hw);
+}
+
+static const struct of_device_id npcm8xx_clk_dt_ids[] = {
+	{ .compatible = "nuvoton,npcm845-clk", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
+
+static struct platform_driver npcm8xx_clk_driver = {
+	.probe  = npcm8xx_clk_probe,
+	.driver = {
+		.name = "npcm8xx_clk",
+		.of_match_table = npcm8xx_clk_dt_ids,
+	},
+};
+
+static int __init npcm8xx_clk_driver_init(void)
+{
+	return platform_driver_register(&npcm8xx_clk_driver);
+}
+arch_initcall(npcm8xx_clk_driver_init);
+
+static void __exit npcm8xx_clk_exit(void)
+{
+	platform_driver_unregister(&npcm8xx_clk_driver);
+}
+module_exit(npcm8xx_clk_exit);
+
+MODULE_DESCRIPTION("Clock driver for Nuvoton NPCM8XX BMC SoC");
+MODULE_AUTHOR("Tomer Maimon <[e-mail]>");
+MODULE_LICENSE("GPL v2");
+