| Message ID | 20230930134114.1816590-6-bryan.odonoghue@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add sc8280xp CAMCC bindings and driver | expand |
On 30/09/2023 15:41, Bryan O'Donoghue wrote: > Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks > similar to most of the sdmX, smX and now scX controllers. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Subject prefix - drop boot: arm64: dts: qcom: ......... Best regards, Krzysztof
On 9/30/23 15:41, Bryan O'Donoghue wrote: > Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks > similar to most of the sdmX, smX and now scX controllers. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index cad59af7ccef..ca43d038578b 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -8,6 +8,7 @@ > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> > #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> > #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> > #include <dt-bindings/interconnect/qcom,osm-l3.h> > #include <dt-bindings/interconnect/qcom,sc8280xp.h> > @@ -3450,6 +3451,21 @@ usb_1_role_switch: endpoint { > }; > }; > > + camcc: clock-controller@ad00000 { > + compatible = "qcom,sc8280xp-camcc"; > + reg = <0 0x0ad00000 0 0x20000>; > + clocks = <&gcc GCC_CAMERA_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <&rpmhcc RPMH_CXO_CLK_A>, > + <&sleep_clk>; > + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; clock-names is now redundant :) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On 30/09/2023 17:41, Konrad Dybcio wrote: > > > On 9/30/23 15:41, Bryan O'Donoghue wrote: >> Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks >> similar to most of the sdmX, smX and now scX controllers. >> >> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> index cad59af7ccef..ca43d038578b 100644 >> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >> @@ -8,6 +8,7 @@ >> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> >> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> >> #include <dt-bindings/clock/qcom,rpmh.h> >> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> >> #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> >> #include <dt-bindings/interconnect/qcom,osm-l3.h> >> #include <dt-bindings/interconnect/qcom,sc8280xp.h> >> @@ -3450,6 +3451,21 @@ usb_1_role_switch: endpoint { >> }; >> }; >> + camcc: clock-controller@ad00000 { >> + compatible = "qcom,sc8280xp-camcc"; >> + reg = <0 0x0ad00000 0 0x20000>; >> + clocks = <&gcc GCC_CAMERA_AHB_CLK>, >> + <&rpmhcc RPMH_CXO_CLK>, >> + <&rpmhcc RPMH_CXO_CLK_A>, >> + <&sleep_clk>; >> + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; > clock-names is now redundant :) > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > Konrad BTW. Looking at the block diagram for the Camera, I see why Cam_CC_AHB is included in this list. Its not called out as a dependency in the clock tree but when you look at the block diagram you can see it gates the AHB bus to the CAM_CC block. anyway --- bod
On 10/1/23 01:01, Bryan O'Donoghue wrote: > On 30/09/2023 17:41, Konrad Dybcio wrote: >> >> >> On 9/30/23 15:41, Bryan O'Donoghue wrote: >>> Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks >>> similar to most of the sdmX, smX and now scX controllers. >>> >>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>> --- >>> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++ >>> 1 file changed, 16 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >>> b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >>> index cad59af7ccef..ca43d038578b 100644 >>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi >>> @@ -8,6 +8,7 @@ >>> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> >>> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> >>> #include <dt-bindings/clock/qcom,rpmh.h> >>> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> >>> #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> >>> #include <dt-bindings/interconnect/qcom,osm-l3.h> >>> #include <dt-bindings/interconnect/qcom,sc8280xp.h> >>> @@ -3450,6 +3451,21 @@ usb_1_role_switch: endpoint { >>> }; >>> }; >>> + camcc: clock-controller@ad00000 { >>> + compatible = "qcom,sc8280xp-camcc"; >>> + reg = <0 0x0ad00000 0 0x20000>; >>> + clocks = <&gcc GCC_CAMERA_AHB_CLK>, >>> + <&rpmhcc RPMH_CXO_CLK>, >>> + <&rpmhcc RPMH_CXO_CLK_A>, >>> + <&sleep_clk>; >>> + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", >>> "sleep_clk"; >> clock-names is now redundant :) >> >> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> >> Konrad > > BTW. > > Looking at the block diagram for the Camera, I see why Cam_CC_AHB is > included in this list. Its not called out as a dependency in the clock > tree but when you look at the block diagram you can see it gates the AHB > bus to the CAM_CC block. Yep, that's why using is as pm_clk for the clock controller makes sense Konrad
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index cad59af7ccef..ca43d038578b 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> @@ -3450,6 +3451,21 @@ usb_1_role_switch: endpoint { }; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc8280xp-camcc"; + reg = <0 0x0ad00000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss0: display-subsystem@ae00000 { compatible = "qcom,sc8280xp-mdss"; reg = <0 0x0ae00000 0 0x1000>;
Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks similar to most of the sdmX, smX and now scX controllers. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)