Message ID | 20231004063712.3348978-3-alvin@pqrs.dk (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | clk: si5351: add option to adjust PLL without glitches | expand |
On 04/10/2023 08:35, Alvin Šipraga wrote: > From: Alvin Šipraga <alsi@bang-olufsen.dk> > > Correct the device tree to conform with the bindings. The node name and > index should be separated with an @. > > Suggested-by: Rob Herring <robh@kernel.org> > Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> > --- This is independent change, please do not mix it with this series. DTS should go via ARM SOC, not drivers subsystem tree. Best regards, Krzysztof
On Wed, 04 Oct 2023 08:35:28 +0200, Alvin Šipraga wrote: > Correct the device tree to conform with the bindings. The node name and > index should be separated with an @. > > Applied, thanks! [2/4] ARM: dts: dove-cubox: fix si5351 node names https://git.kernel.org/krzk/linux-dt/c/2df26223650027602d017368f4e8dc1eff90404e Best regards,
diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts index bfde99486a87..bcaaf8320c45 100644 --- a/arch/arm/boot/dts/marvell/dove-cubox.dts +++ b/arch/arm/boot/dts/marvell/dove-cubox.dts @@ -101,7 +101,7 @@ si5351: clock-generator@60 { /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; - clkout0 { + clkout@0 { reg = <0>; silabs,drive-strength = <8>; silabs,multisynth-source = <0>; @@ -109,7 +109,7 @@ clkout0 { silabs,pll-master; }; - clkout2 { + clkout@2 { reg = <2>; silabs,drive-strength = <8>; silabs,multisynth-source = <1>;