| Message ID | 20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-4-95256ed139e6@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | drm/meson: add support for MIPI DSI Display | expand |
On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote: > The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd > amlogic,meson-axg-hhi-sysctrl system control register zone which is an > intermixed registers zone, thus it's very hard to define clear ranges for > each SoC controlled features even if possible. > > The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent > register range, which is not the reality, thus fix the bindings by dropping > the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml > and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. > > Also drop the unnecessary example, the top level bindings example should > be enough. > > Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> I feel like I left a tag on this one before, but I can't remember. Perhaps I missed the conclusion to the discussion to the discussion with Rob about whether having "reg" was desirable that lead to a tag being dropped? > --- > .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------ > 1 file changed, 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml > index c8c83acfb871..81c2654b7e57 100644 > --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml > +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml > @@ -16,20 +16,8 @@ properties: > "#phy-cells": > const: 0 > > - reg: > - maxItems: 1 > - > required: > - compatible > - - reg > - "#phy-cells" > > additionalProperties: false > - > -examples: > - - | > - phy@0 { > - compatible = "amlogic,g12a-mipi-dphy-analog"; > - reg = <0x0 0xc>; > - #phy-cells = <0>; > - }; > > -- > 2.34.1 >
Hi Conor, On 24/11/2023 13:36, Conor Dooley wrote: > On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote: >> The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd >> amlogic,meson-axg-hhi-sysctrl system control register zone which is an >> intermixed registers zone, thus it's very hard to define clear ranges for >> each SoC controlled features even if possible. >> >> The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent >> register range, which is not the reality, thus fix the bindings by dropping >> the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml >> and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. >> >> Also drop the unnecessary example, the top level bindings example should >> be enough. >> >> Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > > I feel like I left a tag on this one before, but I can't remember. > Perhaps I missed the conclusion to the discussion to the discussion with > Rob about whether having "reg" was desirable that lead to a tag being > dropped? I checked again and nope, not tag, but Rob's question was legitimate and I reworded and clarified the commit message following your reviews. On the other side you suggested a Fixes tag, which I added. The rewording is about why reg doesn't make sense on the nature of the memory region and it doesn't make sense here like other similar nodes. Neil > >> --- >> .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------ >> 1 file changed, 12 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml >> index c8c83acfb871..81c2654b7e57 100644 >> --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml >> +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml >> @@ -16,20 +16,8 @@ properties: >> "#phy-cells": >> const: 0 >> >> - reg: >> - maxItems: 1 >> - >> required: >> - compatible >> - - reg >> - "#phy-cells" >> >> additionalProperties: false >> - >> -examples: >> - - | >> - phy@0 { >> - compatible = "amlogic,g12a-mipi-dphy-analog"; >> - reg = <0x0 0xc>; >> - #phy-cells = <0>; >> - }; >> >> -- >> 2.34.1 >>
On Fri, Nov 24, 2023 at 02:50:58PM +0100, Neil Armstrong wrote: > Hi Conor, > > On 24/11/2023 13:36, Conor Dooley wrote: > > On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote: > > > The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd > > > amlogic,meson-axg-hhi-sysctrl system control register zone which is an > > > intermixed registers zone, thus it's very hard to define clear ranges for > > > each SoC controlled features even if possible. > > > > > > The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent > > > register range, which is not the reality, thus fix the bindings by dropping > > > the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml > > > and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. > > > > > > Also drop the unnecessary example, the top level bindings example should > > > be enough. > > > > > > Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") > > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > > > > I feel like I left a tag on this one before, but I can't remember. > > Perhaps I missed the conclusion to the discussion to the discussion with > > Rob about whether having "reg" was desirable that lead to a tag being > > dropped? > > I checked again and nope, not tag, but Rob's question was legitimate and I reworded > and clarified the commit message following your reviews. > On the other side you suggested a Fixes tag, which I added. > > The rewording is about why reg doesn't make sense on the nature of the memory > region and it doesn't make sense here like other similar nodes. Okay, I thought that I had given you one. Perhaps I forgot to send, or Rob's message came in between me asking about the Fixes tag & replying with an Ack. Sorry about that, Acked-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor.
On 24/11/2023 15:41, Conor Dooley wrote: > On Fri, Nov 24, 2023 at 02:50:58PM +0100, Neil Armstrong wrote: >> Hi Conor, >> >> On 24/11/2023 13:36, Conor Dooley wrote: >>> On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote: >>>> The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd >>>> amlogic,meson-axg-hhi-sysctrl system control register zone which is an >>>> intermixed registers zone, thus it's very hard to define clear ranges for >>>> each SoC controlled features even if possible. >>>> >>>> The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent >>>> register range, which is not the reality, thus fix the bindings by dropping >>>> the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml >>>> and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. >>>> >>>> Also drop the unnecessary example, the top level bindings example should >>>> be enough. >>>> >>>> Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") >>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >>> >>> I feel like I left a tag on this one before, but I can't remember. >>> Perhaps I missed the conclusion to the discussion to the discussion with >>> Rob about whether having "reg" was desirable that lead to a tag being >>> dropped? >> >> I checked again and nope, not tag, but Rob's question was legitimate and I reworded >> and clarified the commit message following your reviews. >> On the other side you suggested a Fixes tag, which I added. >> >> The rewording is about why reg doesn't make sense on the nature of the memory >> region and it doesn't make sense here like other similar nodes. > > Okay, I thought that I had given you one. Perhaps I forgot to send, or > Rob's message came in between me asking about the Fixes tag & replying > with an Ack. Sorry about that, > Acked-by: Conor Dooley <conor.dooley@microchip.com> No problem thanks for your review. Neil > > Cheers, > Conor.
On Fri, 24 Nov 2023 09:41:15 +0100, Neil Armstrong wrote: > The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd > amlogic,meson-axg-hhi-sysctrl system control register zone which is an > intermixed registers zone, thus it's very hard to define clear ranges for > each SoC controlled features even if possible. > > The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent > register range, which is not the reality, thus fix the bindings by dropping > the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml > and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. > > Also drop the unnecessary example, the top level bindings example should > be enough. > > Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------ > 1 file changed, 12 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml index c8c83acfb871..81c2654b7e57 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml @@ -16,20 +16,8 @@ properties: "#phy-cells": const: 0 - reg: - maxItems: 1 - required: - compatible - - reg - "#phy-cells" additionalProperties: false - -examples: - - | - phy@0 { - compatible = "amlogic,g12a-mipi-dphy-analog"; - reg = <0x0 0xc>; - #phy-cells = <0>; - };
The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd amlogic,meson-axg-hhi-sysctrl system control register zone which is an intermixed registers zone, thus it's very hard to define clear ranges for each SoC controlled features even if possible. The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent register range, which is not the reality, thus fix the bindings by dropping the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. Also drop the unnecessary example, the top level bindings example should be enough. Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------ 1 file changed, 12 deletions(-)