diff mbox series

[v2,11/16] arm64: dts: qcom: sm8150: Fix UFS PHY clocks

Message ID 20231218120712.16438-12-manivannan.sadhasivam@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series Fix Qcom UFS PHY clocks | expand

Commit Message

Manivannan Sadhasivam Dec. 18, 2023, 12:07 p.m. UTC
QMP PHY used in SM8150 requires 3 clocks:

* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from GCC

While at it, let's move 'clocks' property before 'clock-names' to match
the style used commonly.

Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Comments

Konrad Dybcio Dec. 20, 2023, 12:34 a.m. UTC | #1
On 18.12.2023 13:07, Manivannan Sadhasivam wrote:
> QMP PHY used in SM8150 requires 3 clocks:
> 
> * ref - 19.2MHz reference clock from RPMh
> * ref_aux - Auxiliary reference clock from GCC
> * qref - QREF clock from GCC
> 
> While at it, let's move 'clocks' property before 'clock-names' to match
> the style used commonly.
> 
> Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 43d56968a382..18af94852974 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2065,10 +2065,12 @@  ufs_mem_phy: phy@1d87000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;