From patchwork Sat Jan 20 01:29:45 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 13524295 Received: from mail-oi1-f171.google.com (mail-oi1-f171.google.com [209.85.167.171]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2446E1383 for ; Sat, 20 Jan 2024 01:29:52 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.167.171 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1705714195; cv=none; b=diSblDnCbcaoKwUSJKZmI8Q+ZN2FhFH/G6ApDewLwHzd91IdrO6L73cTKr40AJ9n8wAjzxjgzJ6QFUeKLiITJjNvQrUIsR7j3RFTHkb12sh9KVUeBb9Wn+IwuDXhbz5SwR7+V7yDsKMtloZ+3ycKB0ZTfeMf7C5SogXK+D0G4OI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1705714195; c=relaxed/simple; bh=fmZuo3MrMT7m1VzAaoEXXShJ/CMEiRm/YGUn6I/FsxU=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=pl1ZUe089Crevu+2jDxAabTmCBOsfdD2RRTZWd8FqejRbhSwbWXXM50RI/ohdZMu/NCBCaFX9G3+iBbxt5XgbzoR8ups4neXvt3Szv2zOcymrPM/INqmdSJ9JQg50yXYprwTsttr3P1i8YsVRMEgtqfFkWaXpkjSKGU+qIA2Xq0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=GTAzW3rF; arc=none smtp.client-ip=209.85.167.171 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="GTAzW3rF" Received: by mail-oi1-f171.google.com with SMTP id 5614622812f47-3bd6d5f2076so934525b6e.0 for ; Fri, 19 Jan 2024 17:29:52 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1705714192; x=1706318992; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=e4kmnGW+syMx6+ePR/dJeXumdAQD9FzNiPa26DzNGl4=; b=GTAzW3rFJpdhONblMmNHGuDmmKhH2YBgd5Jb/qanlXb1XdSKQP9G8oj4NX2nfnFYcc YrbyUv14sa9P6+ypEwHIxXUSI0wfW5XAtKkbHhRlhIqgwzO4ecjLkBBwV7HWk9SBCtZW nKDf1sLcXHKV+jIRO9AfH5Y3QeYyVBcpgeGYoIOr9wdm0Ot+XxekqjdnxMEDJmAWAYPX AQihUITVzgekhKYjoiXaRzDy1JM3mt+6/ua7QQeTw+HXdeSbRnElV1oQXnnNdjpvGwxh Xu+GrnnxbLSWKEPNM1s4bJcYNZvd9Jzts0ghkqpIAbBM4IBF87UJ1P2+LwQD7Ai9VnLh TvwQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1705714192; x=1706318992; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=e4kmnGW+syMx6+ePR/dJeXumdAQD9FzNiPa26DzNGl4=; b=dpYcVJfIS5c0lIimiYveDYzN6uo5kqLnU/zQ0AC0E7YnhCJHN+wjfn/x9jOX5kXFDP 8vYQoRN6cMs9XagnNmBh7a4V/XJRJHaAByT4OApf103GPjfnFdqhUGBnu+68AjE6iL7D C8BdXK4YtVKBgkjDS6WD8EUY/nwDGY8En4NhbDvtSpXPrKUAfNBx69rCjsRNw3ukh5hW om9N5Bhp9ucEK8npzFjkZ26uhh9Fdi6xjntIcuLzW5fnZFbM2NyVXQfh1a7M5L45WJbT dOSANgH9jfcbANO2eUIi4UFK7ARvoQf8rtSNT6mPl9CCMMaXDxN/35zFbkvfvshnkb4s 5h0A== X-Gm-Message-State: AOJu0YzHnSa5bk0D2NQtT2KOjd5tejnBWU5DDnRuVztaYlNOJG74+eL6 Qd6OVTQ5aj68VTaLxpJ5wgLalsG905Ex+rTDhtB0CPw8AI9mA9NvZC0g9CNpv9A= X-Google-Smtp-Source: AGHT+IH5/JX9LSbW5wTrCYXWFxWn7qX6WUiumWLUKYHOjovq6UJrsGgv0XJWVjmB230rfB8b0b/pOw== X-Received: by 2002:a05:6808:1691:b0:3bd:a8a3:7237 with SMTP id bb17-20020a056808169100b003bda8a37237mr728996oib.10.1705714192322; Fri, 19 Jan 2024 17:29:52 -0800 (PST) Received: from localhost ([136.62.192.75]) by smtp.gmail.com with ESMTPSA id zd27-20020a056871279b00b00210b451fe96sm1088971oab.47.2024.01.19.17.29.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 19 Jan 2024 17:29:51 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Andi Shyti , Mark Brown , Rob Herring , Conor Dooley Cc: Alim Akhtar , Sylwester Nawrocki , Tomasz Figa , Chanwoo Choi , linux-spi@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Subject: [PATCH 4/7] clk: samsung: exynos850: Propagate SPI IPCLK rate change Date: Fri, 19 Jan 2024 19:29:45 -0600 Message-Id: <20240120012948.8836-5-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240120012948.8836-1-semen.protsenko@linaro.org> References: <20240120012948.8836-1-semen.protsenko@linaro.org> Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 When SPI transfer is being prepared, the spi-s3c64xx driver will call clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK is a gate (leaf) clock, so it must propagate the rate change up the clock tree, so that corresponding DIV clocks can actually change their divider values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for all SPI instances in Exynos850 (spi_0, spi_1 and spi_2) to make it possible. This change involves next clocks: usi_spi_0: Clock Block Div range -------------------------------------------- gout_spi0_ipclk CMU_PERI - dout_peri_spi0 CMU_PERI /1..32 mout_peri_spi_user CMU_PERI - dout_peri_ip CMU_TOP /1..16 usi_cmgp0: Clock Block Div range -------------------------------------------- gout_cmgp_usi0_ipclk CMU_CMGP - dout_cmgp_usi0 CMU_CMGP /1..32 mout_cmgp_usi0 CMU_CMGP - gout_clkcmu_cmgp_bus CMU_APM - dout_apm_bus CMU_APM /1..8 usi_cmgp1: Clock Block Div range -------------------------------------------- gout_cmgp_usi1_ipclk CMU_CMGP - dout_cmgp_usi1 CMU_CMGP /1..32 mout_cmgp_usi1 CMU_CMGP - gout_clkcmu_cmgp_bus CMU_APM - dout_apm_bus CMU_APM /1..8 With input clock of 400 MHz, this scheme provides next IPCLK rate range, for each SPI block: SPI0: 781 kHz ... 400 MHz SPI1/2: 1.6 MHz ... 400 MHz Accounting for internal /4 divider in SPI blocks, and because the max SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates: SPI0: 200 kHz ... 49.9 MHz SPI1/2: 400 kHz ... 49.9 MHz Which should cover all possible applications of SPI bus. Of course, setting SPI frequency to values as low as 500 kHz will also affect the common bus dividers (dout_apm_bus or dout_peri_ip), which in turn effectively lowers the rates for all leaf bus clocks derived from those dividers, like HSI2C and I3C clocks. But at least it gives the board designer a choice, whether to keep all clocks (SPI/HSI2C/I3C) at high frequencies, or make all those clocks have lower frequencies. Not propagating the rate change to those common dividers would limit this choice to "only high frequencies are allowed for SPI/HSI2C/I3C" option, making the common dividers useless. This decision follows the "Worse is better" approach, relying on the users/engineers to know the system internals when working with such low-level features, instead of trying to account for all possible use-cases. Fixes: 7dd05578198b ("clk: samsung: Introduce Exynos850 clock driver") Signed-off-by: Sam Protsenko --- drivers/clk/samsung/clk-exynos850.c | 32 ++++++++++++++--------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c index 01913dc4eb27..32a8cb861702 100644 --- a/drivers/clk/samsung/clk-exynos850.c +++ b/drivers/clk/samsung/clk-exynos850.c @@ -605,7 +605,7 @@ static const struct samsung_div_clock apm_div_clks[] __initconst = { static const struct samsung_gate_clock apm_gate_clks[] __initconst = { GATE(CLK_GOUT_CLKCMU_CMGP_BUS, "gout_clkcmu_cmgp_bus", "dout_apm_bus", - CLK_CON_GAT_CLKCMU_CMGP_BUS, 21, 0, 0), + CLK_CON_GAT_CLKCMU_CMGP_BUS, 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_CLKCMU_CHUB_BUS, "gout_clkcmu_chub_bus", "mout_clkcmu_chub_bus", CLK_CON_GAT_GATE_CLKCMU_CHUB_BUS, 21, 0, 0), @@ -974,19 +974,19 @@ static const struct samsung_fixed_rate_clock cmgp_fixed_clks[] __initconst = { static const struct samsung_mux_clock cmgp_mux_clks[] __initconst = { MUX(CLK_MOUT_CMGP_ADC, "mout_cmgp_adc", mout_cmgp_adc_p, CLK_CON_MUX_CLK_CMGP_ADC, 0, 1), - MUX(CLK_MOUT_CMGP_USI0, "mout_cmgp_usi0", mout_cmgp_usi0_p, - CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP0, 0, 1), - MUX(CLK_MOUT_CMGP_USI1, "mout_cmgp_usi1", mout_cmgp_usi1_p, - CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP1, 0, 1), + MUX_F(CLK_MOUT_CMGP_USI0, "mout_cmgp_usi0", mout_cmgp_usi0_p, + CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP0, 0, 1, CLK_SET_RATE_PARENT, 0), + MUX_F(CLK_MOUT_CMGP_USI1, "mout_cmgp_usi1", mout_cmgp_usi1_p, + CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP1, 0, 1, CLK_SET_RATE_PARENT, 0), }; static const struct samsung_div_clock cmgp_div_clks[] __initconst = { DIV(CLK_DOUT_CMGP_ADC, "dout_cmgp_adc", "gout_clkcmu_cmgp_bus", CLK_CON_DIV_DIV_CLK_CMGP_ADC, 0, 4), - DIV(CLK_DOUT_CMGP_USI0, "dout_cmgp_usi0", "mout_cmgp_usi0", - CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP0, 0, 5), - DIV(CLK_DOUT_CMGP_USI1, "dout_cmgp_usi1", "mout_cmgp_usi1", - CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP1, 0, 5), + DIV_F(CLK_DOUT_CMGP_USI0, "dout_cmgp_usi0", "mout_cmgp_usi0", + CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP0, 0, 5, CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_CMGP_USI1, "dout_cmgp_usi1", "mout_cmgp_usi1", + CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP1, 0, 5, CLK_SET_RATE_PARENT, 0), }; static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = { @@ -1001,12 +1001,12 @@ static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = { "gout_clkcmu_cmgp_bus", CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK, 21, CLK_IGNORE_UNUSED, 0), GATE(CLK_GOUT_CMGP_USI0_IPCLK, "gout_cmgp_usi0_ipclk", "dout_cmgp_usi0", - CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK, 21, 0, 0), + CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK, 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_CMGP_USI0_PCLK, "gout_cmgp_usi0_pclk", "gout_clkcmu_cmgp_bus", CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_PCLK, 21, 0, 0), GATE(CLK_GOUT_CMGP_USI1_IPCLK, "gout_cmgp_usi1_ipclk", "dout_cmgp_usi1", - CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK, 21, 0, 0), + CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK, 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_CMGP_USI1_PCLK, "gout_cmgp_usi1_pclk", "gout_clkcmu_cmgp_bus", CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_PCLK, 21, 0, 0), @@ -1557,8 +1557,8 @@ static const struct samsung_mux_clock peri_mux_clks[] __initconst = { mout_peri_uart_user_p, PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 4, 1), MUX(CLK_MOUT_PERI_HSI2C_USER, "mout_peri_hsi2c_user", mout_peri_hsi2c_user_p, PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 4, 1), - MUX(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user", mout_peri_spi_user_p, - PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1), + MUX_F(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user", mout_peri_spi_user_p, + PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1, CLK_SET_RATE_PARENT, 0), }; static const struct samsung_div_clock peri_div_clks[] __initconst = { @@ -1568,8 +1568,8 @@ static const struct samsung_div_clock peri_div_clks[] __initconst = { CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1, 0, 5), DIV(CLK_DOUT_PERI_HSI2C2, "dout_peri_hsi2c2", "gout_peri_hsi2c2", CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2, 0, 5), - DIV(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user", - CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5), + DIV_F(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user", + CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5, CLK_SET_RATE_PARENT, 0), }; static const struct samsung_gate_clock peri_gate_clks[] __initconst = { @@ -1611,7 +1611,7 @@ static const struct samsung_gate_clock peri_gate_clks[] __initconst = { "mout_peri_bus_user", CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK, 21, 0, 0), GATE(CLK_GOUT_SPI0_IPCLK, "gout_spi0_ipclk", "dout_peri_spi0", - CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, 0, 0), + CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_SPI0_PCLK, "gout_spi0_pclk", "mout_peri_bus_user", CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK, 21, 0, 0), GATE(CLK_GOUT_SYSREG_PERI_PCLK, "gout_sysreg_peri_pclk",