| Message ID | 20240227-mbly-clk-v8-7-c57fbda7664a@bootlin.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add support for Mobileye EyeQ5 system controller | expand |
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi index 6cc5980e2fa1..e82d2a57f6da 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi @@ -100,6 +100,14 @@ uart2: serial@a00000 { clock-names = "uartclk", "apb_pclk"; }; + olb: system-controller@e00000 { + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd"; + reg = <0 0xe00000 0x0 0x400>; + ranges = <0x0 0x0 0xe00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + }; + gic: interrupt-controller@140000 { compatible = "mti,gic"; reg = <0x0 0x140000 0x0 0x20000>;
The OLB ("Other Logic Block") is a syscon region hosting the clock, reset and pin controllers. It contains registers such as I2C speed mode that need to be accessible by other nodes. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)