diff mbox series

[v8,09/10] MIPS: mobileye: eyeq5: add OLB reset controller node

Message ID 20240227-mbly-clk-v8-9-c57fbda7664a@bootlin.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add support for Mobileye EyeQ5 system controller | expand

Commit Message

Théo Lebrun Feb. 27, 2024, 2:55 p.m. UTC 
Add the devicetree node for the reset controller on the Mobileye EyeQ5
platform. It appears as a subnode to the OLB syscon as its registers
are located in this shared register region.

Add reset phandles to UART nodes.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 1a65b43e13b1..76935f237ab5 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -78,6 +78,7 @@  uart0: serial@800000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 10>;
 		};
 
 		uart1: serial@900000 {
@@ -88,6 +89,7 @@  uart1: serial@900000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 11>;
 		};
 
 		uart2: serial@a00000 {
@@ -98,6 +100,7 @@  uart2: serial@a00000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 12>;
 		};
 
 		olb: system-controller@e00000 {
@@ -107,6 +110,13 @@  olb: system-controller@e00000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			reset: reset-controller@e00000 {
+				compatible = "mobileye,eyeq5-reset";
+				reg = <0x000 0x0c>, <0x200 0x34>, <0x120 0x04>;
+				reg-names = "d0", "d1", "d2";
+				#reset-cells = <2>;
+			};
+
 			clocks: clock-controller@e0002c {
 				compatible = "mobileye,eyeq5-clk";
 				reg = <0x02c 0x50>, <0x11c 0x04>;