| Message ID | 20240417105605.836705-4-quic_varada@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add interconnect driver for IPQ9574 SoC | expand |
On 17/04/2024 12:56, Varadarajan Narayanan wrote: > Add interconnect-cells to clock provider so that it can be > used as icc provider. > > Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip > interfaces. This will be used by the gcc-ipq9574 driver > that will for providing interconnect services using the > icc-clk framework. > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > v8: > Remove ICC_xxx macros > Fix macro defines to be consistent with other bindings > v7: > Fix macro names to be consistent with other bindings > v6: > Removed Reviewed-by: Krzysztof Kozlowski > Redefine the bindings such that driver and DT can share them > > v3: > Squash Documentation/ and include/ changes into same patch > > qcom,ipq9574.h > Move 'first id' to clock driver > > --- > .../bindings/clock/qcom,ipq9574-gcc.yaml | 3 + > .../dt-bindings/interconnect/qcom,ipq9574.h | 59 +++++++++++++++++++ > 2 files changed, 62 insertions(+) > create mode 100644 include/dt-bindings/interconnect/qcom,ipq9574.h > > diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > index 944a0ea79cd6..824781cbdf34 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > @@ -33,6 +33,9 @@ properties: > - description: PCIE30 PHY3 pipe clock source > - description: USB3 PHY pipe clock source > > + '#interconnect-cells': > + const: 1 > + > required: > - compatible > - clocks > diff --git a/include/dt-bindings/interconnect/qcom,ipq9574.h b/include/dt-bindings/interconnect/qcom,ipq9574.h > new file mode 100644 > index 000000000000..42019335c7dd > --- /dev/null > +++ b/include/dt-bindings/interconnect/qcom,ipq9574.h > @@ -0,0 +1,59 @@ > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > +#ifndef INTERCONNECT_QCOM_IPQ9574_H > +#define INTERCONNECT_QCOM_IPQ9574_H > + > +#define MASTER_ANOC_PCIE0 0 > +#define SLAVE_ANOC_PCIE0 1 I still do not see any usage of it. At least symbol cannot be resolved. I assume you use the value, otherwise it would mean our entire feedback was ignored, but then why this cannot be searchable? Again, open existing drivers and look how it is there. Not being able to find the constant is not good. Best regards, Krzysztof
On Wed, Apr 17, 2024 at 04:07:59PM +0200, Krzysztof Kozlowski wrote: > On 17/04/2024 12:56, Varadarajan Narayanan wrote: > > Add interconnect-cells to clock provider so that it can be > > used as icc provider. > > > > Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip > > interfaces. This will be used by the gcc-ipq9574 driver > > that will for providing interconnect services using the > > icc-clk framework. > > > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > > --- > > v8: > > Remove ICC_xxx macros > > Fix macro defines to be consistent with other bindings > > v7: > > Fix macro names to be consistent with other bindings > > v6: > > Removed Reviewed-by: Krzysztof Kozlowski > > Redefine the bindings such that driver and DT can share them > > > > v3: > > Squash Documentation/ and include/ changes into same patch > > > > qcom,ipq9574.h > > Move 'first id' to clock driver > > > > --- > > .../bindings/clock/qcom,ipq9574-gcc.yaml | 3 + > > .../dt-bindings/interconnect/qcom,ipq9574.h | 59 +++++++++++++++++++ > > 2 files changed, 62 insertions(+) > > create mode 100644 include/dt-bindings/interconnect/qcom,ipq9574.h > > > > diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > > index 944a0ea79cd6..824781cbdf34 100644 > > --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > > +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml > > @@ -33,6 +33,9 @@ properties: > > - description: PCIE30 PHY3 pipe clock source > > - description: USB3 PHY pipe clock source > > > > + '#interconnect-cells': > > + const: 1 > > + > > required: > > - compatible > > - clocks > > diff --git a/include/dt-bindings/interconnect/qcom,ipq9574.h b/include/dt-bindings/interconnect/qcom,ipq9574.h > > new file mode 100644 > > index 000000000000..42019335c7dd > > --- /dev/null > > +++ b/include/dt-bindings/interconnect/qcom,ipq9574.h > > @@ -0,0 +1,59 @@ > > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > > +#ifndef INTERCONNECT_QCOM_IPQ9574_H > > +#define INTERCONNECT_QCOM_IPQ9574_H > > + > > +#define MASTER_ANOC_PCIE0 0 > > +#define SLAVE_ANOC_PCIE0 1 > > I still do not see any usage of it. At least symbol cannot be resolved. > I assume you use the value, otherwise it would mean our entire feedback > was ignored, but then why this cannot be searchable? > > Again, open existing drivers and look how it is there. Not being able to > find the constant is not good. It is used in the 6th patch in drivers/clk/qcom/gcc-ipq9574.c via the HWS_DATA macro. Will remove the macro and use it explicitly (as suggested by Dmitry also). Thanks Varada
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml index 944a0ea79cd6..824781cbdf34 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml @@ -33,6 +33,9 @@ properties: - description: PCIE30 PHY3 pipe clock source - description: USB3 PHY pipe clock source + '#interconnect-cells': + const: 1 + required: - compatible - clocks diff --git a/include/dt-bindings/interconnect/qcom,ipq9574.h b/include/dt-bindings/interconnect/qcom,ipq9574.h new file mode 100644 index 000000000000..42019335c7dd --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,ipq9574.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +#ifndef INTERCONNECT_QCOM_IPQ9574_H +#define INTERCONNECT_QCOM_IPQ9574_H + +#define MASTER_ANOC_PCIE0 0 +#define SLAVE_ANOC_PCIE0 1 +#define MASTER_SNOC_PCIE0 2 +#define SLAVE_SNOC_PCIE0 3 +#define MASTER_ANOC_PCIE1 4 +#define SLAVE_ANOC_PCIE1 5 +#define MASTER_SNOC_PCIE1 6 +#define SLAVE_SNOC_PCIE1 7 +#define MASTER_ANOC_PCIE2 8 +#define SLAVE_ANOC_PCIE2 9 +#define MASTER_SNOC_PCIE2 10 +#define SLAVE_SNOC_PCIE2 11 +#define MASTER_ANOC_PCIE3 12 +#define SLAVE_ANOC_PCIE3 13 +#define MASTER_SNOC_PCIE3 14 +#define SLAVE_SNOC_PCIE3 15 +#define MASTER_USB 16 +#define SLAVE_USB 17 +#define MASTER_USB_AXI 18 +#define SLAVE_USB_AXI 19 +#define MASTER_NSSNOC_NSSCC 20 +#define SLAVE_NSSNOC_NSSCC 21 +#define MASTER_NSSNOC_SNOC_0 22 +#define SLAVE_NSSNOC_SNOC_0 23 +#define MASTER_NSSNOC_SNOC_1 24 +#define SLAVE_NSSNOC_SNOC_1 25 +#define MASTER_NSSNOC_PCNOC_1 26 +#define SLAVE_NSSNOC_PCNOC_1 27 +#define MASTER_NSSNOC_QOSGEN_REF 28 +#define SLAVE_NSSNOC_QOSGEN_REF 29 +#define MASTER_NSSNOC_TIMEOUT_REF 30 +#define SLAVE_NSSNOC_TIMEOUT_REF 31 +#define MASTER_NSSNOC_XO_DCD 32 +#define SLAVE_NSSNOC_XO_DCD 33 +#define MASTER_NSSNOC_ATB 34 +#define SLAVE_NSSNOC_ATB 35 +#define MASTER_MEM_NOC_NSSNOC 36 +#define SLAVE_MEM_NOC_NSSNOC 37 +#define MASTER_NSSNOC_MEMNOC 38 +#define SLAVE_NSSNOC_MEMNOC 39 +#define MASTER_NSSNOC_MEM_NOC_1 40 +#define SLAVE_NSSNOC_MEM_NOC_1 41 + +#define MASTER_NSSNOC_PPE 0 +#define SLAVE_NSSNOC_PPE 1 +#define MASTER_NSSNOC_PPE_CFG 2 +#define SLAVE_NSSNOC_PPE_CFG 3 +#define MASTER_NSSNOC_NSS_CSR 4 +#define SLAVE_NSSNOC_NSS_CSR 5 +#define MASTER_NSSNOC_IMEM_QSB 6 +#define SLAVE_NSSNOC_IMEM_QSB 7 +#define MASTER_NSSNOC_IMEM_AHB 8 +#define SLAVE_NSSNOC_IMEM_AHB 9 + +#endif /* INTERCONNECT_QCOM_IPQ9574_H */
Add interconnect-cells to clock provider so that it can be used as icc provider. Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip interfaces. This will be used by the gcc-ipq9574 driver that will for providing interconnect services using the icc-clk framework. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- v8: Remove ICC_xxx macros Fix macro defines to be consistent with other bindings v7: Fix macro names to be consistent with other bindings v6: Removed Reviewed-by: Krzysztof Kozlowski Redefine the bindings such that driver and DT can share them v3: Squash Documentation/ and include/ changes into same patch qcom,ipq9574.h Move 'first id' to clock driver --- .../bindings/clock/qcom,ipq9574-gcc.yaml | 3 + .../dt-bindings/interconnect/qcom,ipq9574.h | 59 +++++++++++++++++++ 2 files changed, 62 insertions(+) create mode 100644 include/dt-bindings/interconnect/qcom,ipq9574.h