@@ -148,6 +148,7 @@ config RESET_MESON_AUDIO_ARB
config RESET_NPCM
bool "NPCM BMC Reset Driver" if COMPILE_TEST
default ARCH_NPCM
+ select AUXILIARY_BUS
help
This enables the reset controller driver for Nuvoton NPCM
BMC SoCs.
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2019 Nuvoton Technology corporation.
+#include <linux/auxiliary_bus.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -10,11 +11,14 @@
#include <linux/property.h>
#include <linux/reboot.h>
#include <linux/reset-controller.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/of_address.h>
+#include <soc/nuvoton/clock-npcm8xx.h>
+
/* NPCM7xx GCR registers */
#define NPCM_MDLR_OFFSET 0x7C
#define NPCM7XX_MDLR_USBD0 BIT(9)
@@ -89,6 +93,7 @@ struct npcm_rc_data {
const struct npcm_reset_info *info;
struct regmap *gcr_regmap;
u32 sw_reset_number;
+ struct device *dev;
void __iomem *base;
spinlock_t lock;
};
@@ -372,6 +377,67 @@ static const struct reset_control_ops npcm_rc_ops = {
.status = npcm_rc_status,
};
+static void npcm_clock_unregister_adev(void *_adev)
+{
+ struct auxiliary_device *adev = _adev;
+
+ auxiliary_device_delete(adev);
+ auxiliary_device_uninit(adev);
+}
+
+static void npcm_clock_adev_release(struct device *dev)
+{
+ struct auxiliary_device *adev = to_auxiliary_dev(dev);
+ struct npcm_clock_adev *rdev = to_npcm_clock_adev(adev);
+
+ kfree(rdev);
+}
+
+static struct auxiliary_device *npcm_clock_adev_alloc(struct npcm_rc_data *rst_data, char *clk_name)
+{
+ struct npcm_clock_adev *rdev;
+ struct auxiliary_device *adev;
+ int ret;
+
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev)
+ return ERR_PTR(-ENOMEM);
+
+ rdev->base = rst_data->base;
+
+ adev = &rdev->adev;
+ adev->name = clk_name;
+ adev->dev.parent = rst_data->dev;
+ adev->dev.release = npcm_clock_adev_release;
+ adev->id = 555u;
+
+ ret = auxiliary_device_init(adev);
+ if (ret) {
+ kfree(rdev);
+ return ERR_PTR(ret);
+ }
+
+ return adev;
+}
+
+static int npcm8xx_clock_controller_register(struct npcm_rc_data *rst_data, char *clk_name)
+{
+ struct auxiliary_device *adev;
+ int ret;
+
+ adev = npcm_clock_adev_alloc(rst_data, clk_name);
+ if (IS_ERR(adev))
+ return PTR_ERR(adev);
+
+ ret = auxiliary_device_add(adev);
+ if (ret) {
+ auxiliary_device_uninit(adev);
+ return ret;
+ }
+
+ return devm_add_action_or_reset(rst_data->dev, npcm_clock_unregister_adev, adev);
+}
+
static int npcm_rc_probe(struct platform_device *pdev)
{
struct npcm_rc_data *rc;
@@ -392,6 +458,7 @@ static int npcm_rc_probe(struct platform_device *pdev)
rc->rcdev.of_node = pdev->dev.of_node;
rc->rcdev.of_reset_n_cells = 2;
rc->rcdev.of_xlate = npcm_reset_xlate;
+ rc->dev = &pdev->dev;
ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev);
if (ret) {
@@ -413,7 +480,12 @@ static int npcm_rc_probe(struct platform_device *pdev)
}
}
- return ret;
+ switch (rc->info->bmc_id) {
+ case BMC_NPCM8XX:
+ return npcm8xx_clock_controller_register(rc, "clk-npcm8xx");
+ default:
+ return ret;
+ }
}
static struct platform_driver npcm_rc_driver = {
new file mode 100644
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_NPCM8XX_CLOCK_H
+#define __SOC_NPCM8XX_CLOCK_H
+
+#include <linux/auxiliary_bus.h>
+#include <linux/container_of.h>
+
+struct npcm_clock_adev {
+ void __iomem *base;
+ struct auxiliary_device adev;
+};
+
+#define to_npcm_clock_adev(_adev) \
+ container_of((_adev), struct npcm_clock_adev, adev)
+
+#endif
Add NPCM8xx clock controller auxiliary bus device registration. The NPCM8xx clock controller is registered as an aux device because the reset and the clock controller share the same register region. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- drivers/reset/Kconfig | 1 + drivers/reset/reset-npcm.c | 74 ++++++++++++++++++++++++++++- include/soc/nuvoton/clock-npcm8xx.h | 16 +++++++ 3 files changed, 90 insertions(+), 1 deletion(-) create mode 100644 include/soc/nuvoton/clock-npcm8xx.h