@@ -48,10 +48,6 @@ &apb_clk {
clock-frequency = <62500000>;
};
-&sdhci_clk {
- clock-frequency = <198000000>;
-};
-
&dmac0 {
status = "okay";
};
@@ -29,10 +29,6 @@ &apb_clk {
clock-frequency = <62500000>;
};
-&sdhci_clk {
- clock-frequency = <198000000>;
-};
-
&dmac0 {
status = "okay";
};
@@ -141,13 +141,6 @@ apb_clk: apb-clk-clock {
#clock-cells = <0>;
};
- sdhci_clk: sdhci-clock {
- compatible = "fixed-clock";
- clock-frequency = <198000000>;
- clock-output-names = "sdhci_clk";
- #clock-cells = <0>;
- };
-
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -200,7 +193,7 @@ emmc: mmc@ffe7080000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7080000 0x0 0x10000>;
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
@@ -209,7 +202,7 @@ sdio0: mmc@ffe7090000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7090000 0x0 0x10000>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
@@ -218,7 +211,7 @@ sdio1: mmc@ffe70a0000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe70a0000 0x0 0x10000>;
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
+ clocks = <&clk CLK_EMMC_SDIO>;
clock-names = "core";
status = "disabled";
};
Change the clock property in the TH1520 mmc controller nodes to a clock provided by AP_SYS clock controller. Remove sdhci fixed clock reference from BeagleV Ahead and LPI4a dts. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com> --- arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ---- arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ---- arch/riscv/boot/dts/thead/th1520.dtsi | 13 +++---------- 3 files changed, 3 insertions(+), 18 deletions(-)