@@ -4,12 +4,14 @@
*/
#include <linux/clk-provider.h>
+#include <linux/interconnect-provider.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
#include "clk-alpha-pll.h"
#include "clk-branch.h"
@@ -126,17 +128,6 @@ static struct clk_alpha_pll gpll4_main = {
.parent_data = &gcc_parent_data_xo,
.num_parents = 1,
.ops = &clk_alpha_pll_stromer_ops,
- /*
- * There are no consumers for this GPLL in kernel yet,
- * (will be added soon), so the clock framework
- * disables this source. But some of the clocks
- * initialized by boot loaders uses this source. So we
- * need to keep this clock ON. Add the
- * CLK_IGNORE_UNUSED flag so the clock will not be
- * disabled. Once the consumer in kernel is added, we
- * can get rid of this flag.
- */
- .flags = CLK_IGNORE_UNUSED,
},
},
};
@@ -3629,6 +3620,24 @@ static const struct qcom_reset_map gcc_ipq5332_resets[] = {
[GCC_UNIPHY1_XPCS_ARES] = { 0x16060 },
};
+#define IPQ_APPS_ID 5332 /* some unique value */
+
+static struct qcom_icc_hws_data icc_ipq5332_hws[] = {
+ { MASTER_SNOC_PCIE3_1_M, SLAVE_SNOC_PCIE3_1_M, GCC_SNOC_PCIE3_1LANE_M_CLK },
+ { MASTER_ANOC_PCIE3_1_S, SLAVE_ANOC_PCIE3_1_S, GCC_SNOC_PCIE3_1LANE_S_CLK },
+ { MASTER_SNOC_PCIE3_2_M, SLAVE_SNOC_PCIE3_2_M, GCC_SNOC_PCIE3_2LANE_M_CLK },
+ { MASTER_ANOC_PCIE3_2_S, SLAVE_ANOC_PCIE3_2_S, GCC_SNOC_PCIE3_2LANE_S_CLK },
+ { MASTER_SNOC_USB, SLAVE_SNOC_USB, GCC_SNOC_USB_CLK },
+ { MASTER_NSSNOC_NSSCC, SLAVE_NSSNOC_NSSCC, GCC_NSSNOC_NSSCC_CLK },
+ { MASTER_NSSNOC_SNOC_0, SLAVE_NSSNOC_SNOC_0, GCC_NSSNOC_SNOC_CLK },
+ { MASTER_NSSNOC_SNOC_1, SLAVE_NSSNOC_SNOC_1, GCC_NSSNOC_SNOC_1_CLK },
+ { MASTER_NSSNOC_ATB, SLAVE_NSSNOC_ATB, GCC_NSSNOC_ATB_CLK },
+ { MASTER_NSSNOC_PCNOC_1, SLAVE_NSSNOC_PCNOC_1, GCC_NSSNOC_PCNOC_1_CLK },
+ { MASTER_NSSNOC_QOSGEN_REF, SLAVE_NSSNOC_QOSGEN_REF, GCC_NSSNOC_QOSGEN_REF_CLK },
+ { MASTER_NSSNOC_TIMEOUT_REF, SLAVE_NSSNOC_TIMEOUT_REF, GCC_NSSNOC_TIMEOUT_REF_CLK },
+ { MASTER_NSSNOC_XO_DCD, SLAVE_NSSNOC_XO_DCD, GCC_NSSNOC_XO_DCD_CLK },
+};
+
static const struct regmap_config gcc_ipq5332_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -3657,6 +3666,9 @@ static const struct qcom_cc_desc gcc_ipq5332_desc = {
.num_resets = ARRAY_SIZE(gcc_ipq5332_resets),
.clk_hws = gcc_ipq5332_hws,
.num_clk_hws = ARRAY_SIZE(gcc_ipq5332_hws),
+ .icc_hws = icc_ipq5332_hws,
+ .num_icc_hws = ARRAY_SIZE(icc_ipq5332_hws),
+ .icc_first_node_id = IPQ_APPS_ID,
};
static int gcc_ipq5332_probe(struct platform_device *pdev)
@@ -3675,6 +3687,7 @@ static struct platform_driver gcc_ipq5332_driver = {
.driver = {
.name = "gcc-ipq5332",
.of_match_table = gcc_ipq5332_match_table,
+ .sync_state = icc_sync_state,
},
};
Use the icc-clk framework to enable few clocks to be able to create paths and use the peripherals connected on those NoCs. Remove CLK_IGNORE_UNUSED from gpll4_main as all consumers have been identified. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- v4: Remove CLK_IGNORE_UNUSED from gpll4_main v3: Not taking Reviewed-by: Konrad as NAK-ed by Dmitry Remove CLK_IGNORE_UNUSED -> CLK_IS_CRITICAL change and fix that in a separate patch --- drivers/clk/qcom/gcc-ipq5332.c | 35 +++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-)