diff mbox series

[v6,2/5] dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details

Message ID 20240730054817.1915652-3-quic_varada@quicinc.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add interconnect driver for IPQ5332 SoC | expand

Commit Message

Varadarajan Narayanan July 30, 2024, 5:48 a.m. UTC
Unlike MSM SoC, IPQ SoC doesn't use RPM to aggregate bandwidth
requests and scale the NoC frequency. The NoCs are turned on and
set to a specific frequency at boot time and that is used for the
lifetime of the system. Hence interconnect was not considered
previously.

The same approach was used for PCIe and at that point the
consensus was to move to interconnect. Hence implemented the ICC
driver and updating the existing USB driver to use the ICC
driver.

USB uses icc-clk framework to enable the NoC interface clock.
Hence the 'iface' clock is removed from the list of clocks.
Update the clock-names list accordingly.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v6: Update commit message
    Add 'Reviewed-by: Krzysztof Kozlowski'

v5: Use ipq4019-dwc3 clock details for ipq5332 instead of new one
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index efde47a5b145..aef42dacc202 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -164,6 +164,7 @@  allOf:
           contains:
             enum:
               - qcom,ipq4019-dwc3
+              - qcom,ipq5332-dwc3
     then:
       properties:
         clocks:
@@ -267,7 +268,6 @@  allOf:
           contains:
             enum:
               - qcom,ipq5018-dwc3
-              - qcom,ipq5332-dwc3
               - qcom,msm8994-dwc3
               - qcom,qcs404-dwc3
     then: