diff mbox series

[v7,7/7] arm64: dts: qcom: ipq9574: Enable CPR

Message ID 20240820055705.3922754-8-quic_varada@quicinc.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Enable CPR for IPQ9574 | expand

Commit Message

Varadarajan Narayanan Aug. 20, 2024, 5:57 a.m. UTC
* Add CPR, OPP table nodes as applicable to IPQ9574 to
  enable CPR functionality on IPQ9574.

* Bootloader set frequency 792MHz is added to the OPP table to
  the avoid 'need at least 2 OPPs to use CPR' error

* Remove 1.2GHz as it is not supported in any of the IPQ9574 SKUs.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v7: Remove RPMPD related entries
v6: Fix subject prefix
v4: s/cprh/cpr4/
v2: Update commit log. No code change.
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 234 ++++++++++++++++++++++++--
 1 file changed, 217 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 48dfafea46a7..a3e02b05003d 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -12,6 +12,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -43,8 +44,9 @@  CPU0: cpu@0 {
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq9574_s1>;
 			#cooling-cells = <2>;
+			power-domains = <&apc_cpr4 0>;
+			power-domain-names = "perf";
 		};
 
 		CPU1: cpu@1 {
@@ -56,8 +58,9 @@  CPU1: cpu@1 {
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq9574_s1>;
 			#cooling-cells = <2>;
+			power-domains = <&apc_cpr4 0>;
+			power-domain-names = "perf";
 		};
 
 		CPU2: cpu@2 {
@@ -69,8 +72,9 @@  CPU2: cpu@2 {
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq9574_s1>;
 			#cooling-cells = <2>;
+			power-domains = <&apc_cpr4 0>;
+			power-domain-names = "perf";
 		};
 
 		CPU3: cpu@3 {
@@ -82,8 +86,9 @@  CPU3: cpu@3 {
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq9574_s1>;
 			#cooling-cells = <2>;
+			power-domains = <&apc_cpr4 0>;
+			power-domain-names = "perf";
 		};
 
 		L2_0: l2-cache {
@@ -106,58 +111,111 @@  memory@40000000 {
 		reg = <0x0 0x40000000 0x0 0x0>;
 	};
 
+	cpr4_opp_table: opp-table-cpr4 {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr4_opp0: opp-0 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp1: opp-1 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <1>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp2: opp-2 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <1>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp3: opp-3 {
+			opp-level = <4>;
+			qcom,opp-fuse-level = <2>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp4: opp-4 {
+			opp-level = <5>;
+			qcom,opp-fuse-level = <2>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp5: opp-5 {
+			opp-level = <6>;
+			qcom,opp-fuse-level = <3>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+
+		cpr4_opp6: opp-6 {
+			opp-level = <7>;
+			qcom,opp-fuse-level = <4>;
+			qcom,opp-cloop-vadj = <0>;
+			qcom,opp-oloop-vadj = <0>;
+		};
+	};
+
 	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
 		nvmem-cells = <&cpu_speed_bin>;
 
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0>;
+			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp0>;
+		};
+
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
-			opp-microvolt = <725000>;
 			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp1>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
-			opp-microvolt = <787500>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <862500>;
 			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp2>;
 		};
 
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <862500>;
 			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp3>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
-			opp-microvolt = <925000>;
 			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp4>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <987500>;
 			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp5>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
-			opp-microvolt = <1062500>;
 			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
+			required-opps = <&cpr4_opp6>;
 		};
 	};
 
@@ -253,6 +311,95 @@  cpu_speed_bin: cpu-speed-bin@15 {
 				reg = <0x15 0x2>;
 				bits = <7 2>;
 			};
+
+			cpr_efuse_speedbin: speedbin@5 {
+				reg = <0x5 0x8>;
+				bits = <0 3>;
+			};
+
+			cpr_fuse_revision: cpr-fusing-rev@7 {
+				reg = <0x7 0x8>;
+				bits = <1 5>;
+			};
+
+			/* CPR Ring Oscillator: Power Cluster */
+			cpr_ro_sel0_pwrcl: rosel0-pwrcl@358 {	/* ROSEL_SVS */
+				reg = <0x358 0x1>;
+				bits = <4 4>;
+			};
+
+			cpr_ro_sel1_pwrcl: rosel1-pwrcl@358 {	/* ROSEL_NOM */
+				reg = <0x358 0x1>;
+				bits = <0 4>;
+			};
+
+			cpr_ro_sel2_pwrcl: rosel2-pwrcl@350 {	/* ROSEL_TUR */
+				reg = <0x350 0x1>;
+				bits = <4 4>;
+			};
+
+			cpr_ro_sel3_pwrcl: rosel3-pwrcl@350 {	/* ROSEL_STUR */
+				reg = <0x350 0x1>;
+				bits = <0 4>;
+			};
+
+			/* CPR Init Voltage: Power Cluster */
+			cpr_init_voltage0_pwrcl: ivolt0-pwrcl@343 {	/* VOLT_SVS */
+				reg = <0x343 0x1>;
+				bits = <0 6>;
+			};
+
+			cpr_init_voltage1_pwrcl: ivolt1-pwrcl@342 {	/* VOLT_NOM */
+				reg = <0x342 0x1>;
+				bits = <2 6>;
+			};
+
+			cpr_init_voltage2_pwrcl: ivolt2-pwrcl@341 {	/* VOLT_TUR */
+				reg = <0x341 0x2>;
+				bits = <4 6>;
+			};
+
+			cpr_init_voltage3_pwrcl: ivolt3-pwrcl@340 {	/* VOLT_STUR */
+				reg = <0x340 0x2>;
+				bits = <6 6>;
+			};
+
+			/* CPR Target Quotients: Power Cluster */
+			cpr_quot0_pwrcl: quot0-pwrcl@354 {	/* QUOT_VMIN_SVS */
+				reg = <0x354 0x2>;
+				bits = <0 12>;
+			};
+
+			cpr_quot1_pwrcl: quot1-pwrcl@352 {	/* QUOT_VMIN_NOM */
+				reg = <0x352 0x2>;
+				bits = <4 12>;
+			};
+
+			cpr_quot2_pwrcl: quot2-pwrcl@351 {	/* QUOT_VMIN_TUR */
+				reg = <0x351 0x2>;
+				bits = <0 12>;
+			};
+
+			cpr_quot3_pwrcl: quot3-pwrcl@355 {	/* QUOT_VMIN_STUR */
+				reg = <0x355 0x2>;
+				bits = <4 12>;
+			};
+
+			/* CPR Quotient Offsets: Power Cluster */
+			cpr_quot_offset1_pwrcl: qoff1-pwrcl@34e {	/* QUOT_OFFSET_NOM_SVS */
+				reg = <0x34e 0x1>;
+				bits = <0 8>;
+			};
+
+			cpr_quot_offset2_pwrcl: qoff2-pwrcl@34d {	/* QUOT_OFFSET_TUR_NOM */
+				reg = <0x34d 0x1>;
+				bits = <0 8>;
+			};
+
+			cpr_quot_offset3_pwrcl: qoff0-pwrcl@34c {	/* QUOT_OFFSET_STUR_TUR */
+				reg = <0x34c 0x1>;
+				bits = <0 8>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -641,6 +788,59 @@  usb_0_dwc3: usb@8a00000 {
 			};
 		};
 
+		apc_cpr4: power-controller@b018000 {
+			compatible = "qcom,ipq9574-cpr4", "qcom,cprh";
+			reg = <0x0b018000 0x4000>,
+			      <0x00048000 0x4000>;
+
+			clocks = <&gcc GCC_RBCPR_CLK>;
+
+			interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+			vdd-supply = <&ipq9574_s1>;
+
+			/* Set the CPR clock here, it needs to match XO */
+			assigned-clocks = <&gcc GCC_RBCPR_CLK>;
+			assigned-clock-rates = <24000000>;
+
+			operating-points-v2 = <&cpr4_opp_table>;
+			#power-domain-cells = <1>;
+
+			nvmem-cells = <&cpr_efuse_speedbin>,
+				      <&cpr_fuse_revision>,
+				      <&cpr_quot0_pwrcl>,
+				      <&cpr_quot1_pwrcl>,
+				      <&cpr_quot2_pwrcl>,
+				      <&cpr_quot3_pwrcl>,
+				      <&cpr_quot_offset1_pwrcl>,
+				      <&cpr_quot_offset2_pwrcl>,
+				      <&cpr_quot_offset3_pwrcl>,
+				      <&cpr_init_voltage0_pwrcl>,
+				      <&cpr_init_voltage1_pwrcl>,
+				      <&cpr_init_voltage2_pwrcl>,
+				      <&cpr_init_voltage3_pwrcl>,
+				      <&cpr_ro_sel0_pwrcl>,
+				      <&cpr_ro_sel1_pwrcl>,
+				      <&cpr_ro_sel2_pwrcl>,
+				      <&cpr_ro_sel3_pwrcl>;
+			nvmem-cell-names = "cpr_speed_bin",
+					   "cpr_fuse_revision",
+					   "cpr0_quotient1",
+					   "cpr0_quotient2",
+					   "cpr0_quotient3",
+					   "cpr0_quotient4",
+					   "cpr0_quotient_offset2",
+					   "cpr0_quotient_offset3",
+					   "cpr0_quotient_offset4",
+					   "cpr0_init_voltage1",
+					   "cpr0_init_voltage2",
+					   "cpr0_init_voltage3",
+					   "cpr0_init_voltage4",
+					   "cpr0_ring_osc1",
+					   "cpr0_ring_osc2",
+					   "cpr0_ring_osc3",
+					   "cpr0_ring_osc4";
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */