@@ -82,6 +82,15 @@
#define GAT_CMU_NS_BRDG_CMU_IPCLKPORT_CLK__PSOC_CMU__CLK_CMU 0x205c
#define GAT_CMU_SYSREG_CMU_IPCLKPORT_PCLK 0x2060
+/* NOTE: Must be equal to the last clock ID increased by one */
+#define CLKS_NR_CMU (GAT_CMU_FSYS0_SHARED0DIV4 + 1)
+#define CLKS_NR_PERIC (PERIC_DOUT_RGMII_CLK + 1)
+#define CLKS_NR_FSYS0 (FSYS0_DOUT_FSYS0_PERIBUS_GRP + 1)
+#define CLKS_NR_FSYS1 (PCIE_LINK1_IPCLKPORT_SLV_ACLK + 1)
+#define CLKS_NR_IMEM (IMEM_TMU_GT_IPCLKPORT_I_CLK_TS + 1)
+#define CLKS_NR_MFC (MFC_MFC_IPCLKPORT_ACLK + 1)
+#define CLKS_NR_CAM_CSI (CAM_CSI2_3_IPCLKPORT_I_ACLK + 1)
+
static const unsigned long cmu_clk_regs[] __initconst = {
PLL_LOCKTIME_PLL_SHARED0,
PLL_LOCKTIME_PLL_SHARED1,
@@ -300,7 +309,7 @@ static const struct samsung_cmu_info cmu_cmu_info __initconst = {
.nr_div_clks = ARRAY_SIZE(cmu_div_clks),
.gate_clks = cmu_gate_clks,
.nr_gate_clks = ARRAY_SIZE(cmu_gate_clks),
- .nr_clk_ids = CMU_NR_CLK,
+ .nr_clk_ids = CLKS_NR_CMU,
.clk_regs = cmu_clk_regs,
.nr_clk_regs = ARRAY_SIZE(cmu_clk_regs),
};
@@ -665,7 +674,7 @@ static const struct samsung_cmu_info peric_cmu_info __initconst = {
.nr_gate_clks = ARRAY_SIZE(peric_gate_clks),
.fixed_clks = peric_fixed_clks,
.nr_fixed_clks = ARRAY_SIZE(peric_fixed_clks),
- .nr_clk_ids = PERIC_NR_CLK,
+ .nr_clk_ids = CLKS_NR_PERIC,
.clk_regs = peric_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peric_clk_regs),
.clk_name = "dout_cmu_pll_shared0_div4",
@@ -964,7 +973,7 @@ static const struct samsung_cmu_info fsys0_cmu_info __initconst = {
.nr_gate_clks = ARRAY_SIZE(fsys0_gate_clks),
.fixed_clks = fsys0_fixed_clks,
.nr_fixed_clks = ARRAY_SIZE(fsys0_fixed_clks),
- .nr_clk_ids = FSYS0_NR_CLK,
+ .nr_clk_ids = CLKS_NR_FSYS0,
.clk_regs = fsys0_clk_regs,
.nr_clk_regs = ARRAY_SIZE(fsys0_clk_regs),
.clk_name = "dout_cmu_fsys0_shared1div4",
@@ -1136,7 +1145,7 @@ static const struct samsung_cmu_info fsys1_cmu_info __initconst = {
.nr_gate_clks = ARRAY_SIZE(fsys1_gate_clks),
.fixed_clks = fsys1_fixed_clks,
.nr_fixed_clks = ARRAY_SIZE(fsys1_fixed_clks),
- .nr_clk_ids = FSYS1_NR_CLK,
+ .nr_clk_ids = CLKS_NR_FSYS1,
.clk_regs = fsys1_clk_regs,
.nr_clk_regs = ARRAY_SIZE(fsys1_clk_regs),
.clk_name = "dout_cmu_fsys1_shared0div4",
@@ -1413,7 +1422,7 @@ static const struct samsung_cmu_info imem_cmu_info __initconst = {
.nr_div_clks = ARRAY_SIZE(imem_div_clks),
.gate_clks = imem_gate_clks,
.nr_gate_clks = ARRAY_SIZE(imem_gate_clks),
- .nr_clk_ids = IMEM_NR_CLK,
+ .nr_clk_ids = CLKS_NR_IMEM,
.clk_regs = imem_clk_regs,
.nr_clk_regs = ARRAY_SIZE(imem_clk_regs),
};
@@ -1538,7 +1547,7 @@ static const struct samsung_cmu_info mfc_cmu_info __initconst = {
.nr_div_clks = ARRAY_SIZE(mfc_div_clks),
.gate_clks = mfc_gate_clks,
.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks),
- .nr_clk_ids = MFC_NR_CLK,
+ .nr_clk_ids = CLKS_NR_MFC,
.clk_regs = mfc_clk_regs,
.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs),
};
@@ -1742,7 +1751,7 @@ static const struct samsung_cmu_info cam_csi_cmu_info __initconst = {
.nr_div_clks = ARRAY_SIZE(cam_csi_div_clks),
.gate_clks = cam_csi_gate_clks,
.nr_gate_clks = ARRAY_SIZE(cam_csi_gate_clks),
- .nr_clk_ids = CAM_CSI_NR_CLK,
+ .nr_clk_ids = CLKS_NR_CAM_CSI,
.clk_regs = cam_csi_clk_regs,
.nr_clk_regs = ARRAY_SIZE(cam_csi_clk_regs),
};
Number of clocks supported by Linux drivers might vary - sometimes we add new clocks, not exposed previously. Therefore these numbers of clocks should not be in the bindings, as that prevents changing them. Define number of clocks per each clock controller inside the driver directly. Signed-off-by: Inbaraj E <inbaraj.e@samsung.com> --- drivers/clk/samsung/clk-fsd.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)