diff mbox series

[2/6] ASoC: sun4i-codec: Add playback only flag to quirks

Message ID 20240929100750.860329-3-ryan@testtoast.com (mailing list archive)
State Under Review
Headers show
Series ASoC: add Allwinner H616 audio codec support | expand

Commit Message

Ryan Walklin Sept. 29, 2024, 10:06 a.m. UTC 
From: Marcus Cooper <codekipper@gmail.com>

Some devices only have the playback side of the codec implemented
so add a quirk to check for this.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
 sound/soc/sunxi/sun4i-codec.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 37f5678b55291..312d2655c3f4e 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1571,6 +1571,7 @@  struct sun4i_codec_quirks {
 	unsigned int reg_dac_txdata;	/* TX FIFO offset for DMA config */
 	unsigned int reg_adc_rxdata;	/* RX FIFO offset for DMA config */
 	bool has_reset;
+	bool playback_only;
 };
 
 static const struct sun4i_codec_quirks sun4i_codec_quirks = {
@@ -1779,10 +1780,13 @@  static int sun4i_codec_probe(struct platform_device *pdev)
 	scodec->playback_dma_data.maxburst = 8;
 	scodec->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
-	/* DMA configuration for RX FIFO */
-	scodec->capture_dma_data.addr = res->start + quirks->reg_adc_rxdata;
-	scodec->capture_dma_data.maxburst = 8;
-	scodec->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	if (!quirks->playback_only) {
+		/* DMA configuration for RX FIFO */
+		scodec->capture_dma_data.addr = res->start +
+						quirks->reg_adc_rxdata;
+		scodec->capture_dma_data.maxburst = 8;
+		scodec->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	}
 
 	ret = devm_snd_soc_register_component(&pdev->dev, quirks->codec,
 				     &sun4i_codec_dai, 1);