diff mbox series

[RESEND,v13,05/12] clk: mmp: Add Marvell PXA1908 APBC driver

Message ID 20241104-pxa1908-lkml-v13-5-e050609b8d6c@skole.hr (mailing list archive)
State Under Review
Headers show
Series Initial Marvell PXA1908 support | expand

Commit Message

Duje Mihanović via B4 Relay Nov. 4, 2024, 4:37 p.m. UTC 
From: Duje Mihanović <duje.mihanovic@skole.hr>

Add driver for the APBC controller block found on Marvell's PXA1908 SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/Makefile           |   2 +-
 drivers/clk/mmp/clk-pxa1908-apbc.c | 130 +++++++++++++++++++++++++++++++++++++
 2 files changed, 131 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 441bf83080a12b89dd8afca11236ba2a2199795e..685bb80f8ae1f16d967dc4f6f5a6ce4e3f52d2bd 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@  obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
 obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
 obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
 
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apbc.c b/drivers/clk/mmp/clk-pxa1908-apbc.c
new file mode 100644
index 0000000000000000000000000000000000000000..b93d08466198569a975f580a1a3c27aae2b838c2
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apbc.c
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APBC_UART0		0x0
+#define APBC_UART1		0x4
+#define APBC_GPIO		0x8
+#define APBC_PWM0		0xc
+#define APBC_PWM1		0x10
+#define APBC_PWM2		0x14
+#define APBC_PWM3		0x18
+#define APBC_SSP0		0x1c
+#define APBC_SSP1		0x20
+#define APBC_IPC_RST		0x24
+#define APBC_RTC		0x28
+#define APBC_TWSI0		0x2c
+#define APBC_KPC		0x30
+#define APBC_SWJTAG		0x40
+#define APBC_SSP2		0x4c
+#define APBC_TWSI1		0x60
+#define APBC_THERMAL		0x6c
+#define APBC_TWSI3		0x70
+
+#define APBC_NR_CLKS		19
+
+struct pxa1908_clk_unit {
+	struct mmp_clk_unit unit;
+	void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+	{PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+	{PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+	{PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+	{PXA1908_CLK_THERMAL, "thermal_clk", NULL, 0, APBC_THERMAL, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_IPC_RST, "ipc_clk", NULL, 0, APBC_IPC_RST, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_SSP0, "ssp0_clk", "ssp0_mux", 0, APBC_SSP0, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_SSP2, "ssp2_clk", "ssp2_mux", 0, APBC_SSP2, 0x7, 3, 0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+	{0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+	{0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+	{0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+	{0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+	struct clk *clk;
+
+	mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->base + APBC_PWM0,
+			0x5, 1, 0, 0, &pwm0_lock);
+	mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->base + APBC_PWM2,
+			0x5, 1, 0, 0, &pwm2_lock);
+	clk = mmp_clk_register_apbc("swjtag", NULL,
+			pxa_unit->base + APBC_SWJTAG, 10, 0, NULL);
+	mmp_clk_add(unit, PXA1908_CLK_SWJTAG, clk);
+	mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->base,
+			ARRAY_SIZE(apbc_mux_clks));
+	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->base,
+			ARRAY_SIZE(apbc_gate_clks));
+}
+
+static int pxa1908_apbc_probe(struct platform_device *pdev)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+	if (IS_ERR(pxa_unit))
+		return PTR_ERR(pxa_unit);
+
+	pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pxa_unit->base))
+		return PTR_ERR(pxa_unit->base);
+
+	mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APBC_NR_CLKS);
+
+	pxa1908_apb_periph_clk_init(pxa_unit);
+
+	return 0;
+}
+
+static const struct of_device_id pxa1908_apbc_match_table[] = {
+	{ .compatible = "marvell,pxa1908-apbc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apbc_match_table);
+
+static struct platform_driver pxa1908_apbc_driver = {
+	.probe = pxa1908_apbc_probe,
+	.driver = {
+		.name = "pxa1908-apbc",
+		.of_match_table = pxa1908_apbc_match_table
+	}
+};
+module_platform_driver(pxa1908_apbc_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APBC Clock Driver");
+MODULE_LICENSE("GPL");