| Message ID | 20241108104958.2931943-3-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | Add audio support for the Renesas RZ/G3S SoC | expand |
Hi Claudiu, Thanks for the patch. > -----Original Message----- > From: Claudiu <claudiu.beznea@tuxon.dev> > Sent: 08 November 2024 10:50 > Subject: [PATCH v2 02/25] clk: versaclock3: Prepare for the addition of 5L35023 device > > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The 5P35023 and 5L35035 Versa 3 clock generator variants are different but the versaclock3 driver > could be used with small adjustments. The features that are implemented in driver and differs b/w > variants are the PLL2 Fvco and clock sel bit for SE2 clock. Adjust the driver to prepare for the > addition of 5L35023 device. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Cheers, Biju > --- > > Changes in v2: > - none > > drivers/clk/clk-versaclock3.c | 61 ++++++++++++++++++++++++----------- > 1 file changed, 43 insertions(+), 18 deletions(-) > > diff --git a/drivers/clk/clk-versaclock3.c b/drivers/clk/clk-versaclock3.c index > 76d7ea1964c3..1398d16df5d0 100644 > --- a/drivers/clk/clk-versaclock3.c > +++ b/drivers/clk/clk-versaclock3.c > @@ -78,9 +78,6 @@ > #define VC3_PLL1_VCO_MIN 300000000UL > #define VC3_PLL1_VCO_MAX 600000000UL > > -#define VC3_PLL2_VCO_MIN 400000000UL > -#define VC3_PLL2_VCO_MAX 1200000000UL > - > #define VC3_PLL3_VCO_MIN 300000000UL > #define VC3_PLL3_VCO_MAX 800000000UL > > @@ -147,9 +144,13 @@ struct vc3_pfd_data { > u8 mdiv2_bitmsk; > }; > > +struct vc3_vco { > + unsigned long min; > + unsigned long max; > +}; > + > struct vc3_pll_data { > - unsigned long vco_min; > - unsigned long vco_max; > + struct vc3_vco vco; > u8 num; > u8 int_div_msb_offs; > u8 int_div_lsb_offs; > @@ -166,12 +167,17 @@ struct vc3_div_data { struct vc3_hw_data { > struct clk_hw hw; > struct regmap *regmap; > - const void *data; > + void *data; > > u32 div_int; > u32 div_frc; > }; > > +struct vc3_hw_cfg { > + struct vc3_vco pll2_vco; > + u32 se2_clk_sel_msk; > +}; > + > static const struct clk_div_table div1_divs[] = { > { .val = 0, .div = 1, }, { .val = 1, .div = 4, }, > { .val = 2, .div = 5, }, { .val = 3, .div = 6, }, @@ -386,10 +392,10 @@ static long > vc3_pll_round_rate(struct clk_hw *hw, unsigned long rate, > const struct vc3_pll_data *pll = vc3->data; > u64 div_frc; > > - if (rate < pll->vco_min) > - rate = pll->vco_min; > - if (rate > pll->vco_max) > - rate = pll->vco_max; > + if (rate < pll->vco.min) > + rate = pll->vco.min; > + if (rate > pll->vco.max) > + rate = pll->vco.max; > > vc3->div_int = rate / *parent_rate; > > @@ -680,8 +686,10 @@ static struct vc3_hw_data clk_pll[] = { > .num = VC3_PLL1, > .int_div_msb_offs = VC3_PLL1_LOOP_FILTER_N_DIV_MSB, > .int_div_lsb_offs = VC3_PLL1_VCO_N_DIVIDER, > - .vco_min = VC3_PLL1_VCO_MIN, > - .vco_max = VC3_PLL1_VCO_MAX > + .vco = { > + .min = VC3_PLL1_VCO_MIN, > + .max = VC3_PLL1_VCO_MAX > + } > }, > .hw.init = &(struct clk_init_data) { > .name = "pll1", > @@ -698,8 +706,6 @@ static struct vc3_hw_data clk_pll[] = { > .num = VC3_PLL2, > .int_div_msb_offs = VC3_PLL2_FB_INT_DIV_MSB, > .int_div_lsb_offs = VC3_PLL2_FB_INT_DIV_LSB, > - .vco_min = VC3_PLL2_VCO_MIN, > - .vco_max = VC3_PLL2_VCO_MAX > }, > .hw.init = &(struct clk_init_data) { > .name = "pll2", > @@ -716,8 +722,10 @@ static struct vc3_hw_data clk_pll[] = { > .num = VC3_PLL3, > .int_div_msb_offs = VC3_PLL3_LOOP_FILTER_N_DIV_MSB, > .int_div_lsb_offs = VC3_PLL3_N_DIVIDER, > - .vco_min = VC3_PLL3_VCO_MIN, > - .vco_max = VC3_PLL3_VCO_MAX > + .vco = { > + .min = VC3_PLL3_VCO_MIN, > + .max = VC3_PLL3_VCO_MAX > + } > }, > .hw.init = &(struct clk_init_data) { > .name = "pll3", > @@ -901,7 +909,6 @@ static struct vc3_hw_data clk_mux[] = { > [VC3_SE2_MUX] = { > .data = &(struct vc3_clk_data) { > .offs = VC3_SE2_CTRL_REG0, > - .bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL > }, > .hw.init = &(struct clk_init_data) { > .name = "se2_mux", > @@ -982,6 +989,7 @@ static int vc3_probe(struct i2c_client *client) { > struct device *dev = &client->dev; > u8 settings[NUM_CONFIG_REGISTERS]; > + const struct vc3_hw_cfg *data; > struct regmap *regmap; > const char *name; > int ret, i; > @@ -1029,9 +1037,16 @@ static int vc3_probe(struct i2c_client *client) > clk_pfd[i].hw.init->name); > } > > + data = i2c_get_match_data(client); > + > /* Register pll's */ > for (i = 0; i < ARRAY_SIZE(clk_pll); i++) { > clk_pll[i].regmap = regmap; > + if (i == VC3_PLL2) { > + struct vc3_pll_data *pll_data = clk_pll[i].data; > + > + pll_data->vco = data->pll2_vco; > + } > ret = devm_clk_hw_register(dev, &clk_pll[i].hw); > if (ret) > return dev_err_probe(dev, ret, "%s failed\n", @@ -1059,6 +1074,11 @@ static int > vc3_probe(struct i2c_client *client) > /* Register clk muxes */ > for (i = 0; i < ARRAY_SIZE(clk_mux); i++) { > clk_mux[i].regmap = regmap; > + if (i == VC3_SE2_MUX) { > + struct vc3_clk_data *clk_data = clk_mux[i].data; > + > + clk_data->bitmsk = data->se2_clk_sel_msk; > + } > ret = devm_clk_hw_register(dev, &clk_mux[i].hw); > if (ret) > return dev_err_probe(dev, ret, "%s failed\n", @@ -1108,8 +1128,13 @@ static int > vc3_probe(struct i2c_client *client) > return ret; > } > > +static const struct vc3_hw_cfg vc3_5p = { > + .pll2_vco = { .min = 400000000UL, .max = 1200000000UL }, > + .se2_clk_sel_msk = BIT(6), > +}; > + > static const struct of_device_id dev_ids[] = { > - { .compatible = "renesas,5p35023" }, > + { .compatible = "renesas,5p35023", .data = &vc3_5p }, > { /* Sentinel */ } > }; > MODULE_DEVICE_TABLE(of, dev_ids); > -- > 2.39.2
diff --git a/drivers/clk/clk-versaclock3.c b/drivers/clk/clk-versaclock3.c index 76d7ea1964c3..1398d16df5d0 100644 --- a/drivers/clk/clk-versaclock3.c +++ b/drivers/clk/clk-versaclock3.c @@ -78,9 +78,6 @@ #define VC3_PLL1_VCO_MIN 300000000UL #define VC3_PLL1_VCO_MAX 600000000UL -#define VC3_PLL2_VCO_MIN 400000000UL -#define VC3_PLL2_VCO_MAX 1200000000UL - #define VC3_PLL3_VCO_MIN 300000000UL #define VC3_PLL3_VCO_MAX 800000000UL @@ -147,9 +144,13 @@ struct vc3_pfd_data { u8 mdiv2_bitmsk; }; +struct vc3_vco { + unsigned long min; + unsigned long max; +}; + struct vc3_pll_data { - unsigned long vco_min; - unsigned long vco_max; + struct vc3_vco vco; u8 num; u8 int_div_msb_offs; u8 int_div_lsb_offs; @@ -166,12 +167,17 @@ struct vc3_div_data { struct vc3_hw_data { struct clk_hw hw; struct regmap *regmap; - const void *data; + void *data; u32 div_int; u32 div_frc; }; +struct vc3_hw_cfg { + struct vc3_vco pll2_vco; + u32 se2_clk_sel_msk; +}; + static const struct clk_div_table div1_divs[] = { { .val = 0, .div = 1, }, { .val = 1, .div = 4, }, { .val = 2, .div = 5, }, { .val = 3, .div = 6, }, @@ -386,10 +392,10 @@ static long vc3_pll_round_rate(struct clk_hw *hw, unsigned long rate, const struct vc3_pll_data *pll = vc3->data; u64 div_frc; - if (rate < pll->vco_min) - rate = pll->vco_min; - if (rate > pll->vco_max) - rate = pll->vco_max; + if (rate < pll->vco.min) + rate = pll->vco.min; + if (rate > pll->vco.max) + rate = pll->vco.max; vc3->div_int = rate / *parent_rate; @@ -680,8 +686,10 @@ static struct vc3_hw_data clk_pll[] = { .num = VC3_PLL1, .int_div_msb_offs = VC3_PLL1_LOOP_FILTER_N_DIV_MSB, .int_div_lsb_offs = VC3_PLL1_VCO_N_DIVIDER, - .vco_min = VC3_PLL1_VCO_MIN, - .vco_max = VC3_PLL1_VCO_MAX + .vco = { + .min = VC3_PLL1_VCO_MIN, + .max = VC3_PLL1_VCO_MAX + } }, .hw.init = &(struct clk_init_data) { .name = "pll1", @@ -698,8 +706,6 @@ static struct vc3_hw_data clk_pll[] = { .num = VC3_PLL2, .int_div_msb_offs = VC3_PLL2_FB_INT_DIV_MSB, .int_div_lsb_offs = VC3_PLL2_FB_INT_DIV_LSB, - .vco_min = VC3_PLL2_VCO_MIN, - .vco_max = VC3_PLL2_VCO_MAX }, .hw.init = &(struct clk_init_data) { .name = "pll2", @@ -716,8 +722,10 @@ static struct vc3_hw_data clk_pll[] = { .num = VC3_PLL3, .int_div_msb_offs = VC3_PLL3_LOOP_FILTER_N_DIV_MSB, .int_div_lsb_offs = VC3_PLL3_N_DIVIDER, - .vco_min = VC3_PLL3_VCO_MIN, - .vco_max = VC3_PLL3_VCO_MAX + .vco = { + .min = VC3_PLL3_VCO_MIN, + .max = VC3_PLL3_VCO_MAX + } }, .hw.init = &(struct clk_init_data) { .name = "pll3", @@ -901,7 +909,6 @@ static struct vc3_hw_data clk_mux[] = { [VC3_SE2_MUX] = { .data = &(struct vc3_clk_data) { .offs = VC3_SE2_CTRL_REG0, - .bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL }, .hw.init = &(struct clk_init_data) { .name = "se2_mux", @@ -982,6 +989,7 @@ static int vc3_probe(struct i2c_client *client) { struct device *dev = &client->dev; u8 settings[NUM_CONFIG_REGISTERS]; + const struct vc3_hw_cfg *data; struct regmap *regmap; const char *name; int ret, i; @@ -1029,9 +1037,16 @@ static int vc3_probe(struct i2c_client *client) clk_pfd[i].hw.init->name); } + data = i2c_get_match_data(client); + /* Register pll's */ for (i = 0; i < ARRAY_SIZE(clk_pll); i++) { clk_pll[i].regmap = regmap; + if (i == VC3_PLL2) { + struct vc3_pll_data *pll_data = clk_pll[i].data; + + pll_data->vco = data->pll2_vco; + } ret = devm_clk_hw_register(dev, &clk_pll[i].hw); if (ret) return dev_err_probe(dev, ret, "%s failed\n", @@ -1059,6 +1074,11 @@ static int vc3_probe(struct i2c_client *client) /* Register clk muxes */ for (i = 0; i < ARRAY_SIZE(clk_mux); i++) { clk_mux[i].regmap = regmap; + if (i == VC3_SE2_MUX) { + struct vc3_clk_data *clk_data = clk_mux[i].data; + + clk_data->bitmsk = data->se2_clk_sel_msk; + } ret = devm_clk_hw_register(dev, &clk_mux[i].hw); if (ret) return dev_err_probe(dev, ret, "%s failed\n", @@ -1108,8 +1128,13 @@ static int vc3_probe(struct i2c_client *client) return ret; } +static const struct vc3_hw_cfg vc3_5p = { + .pll2_vco = { .min = 400000000UL, .max = 1200000000UL }, + .se2_clk_sel_msk = BIT(6), +}; + static const struct of_device_id dev_ids[] = { - { .compatible = "renesas,5p35023" }, + { .compatible = "renesas,5p35023", .data = &vc3_5p }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dev_ids);