| Message ID | 20241111-fix_childclk_of_roclk_has_been_tampered_with-v1-1-f8c1b6ffdcb0@amlogic.com (mailing list archive) |
|---|---|
| State | Under Review |
| Headers | show |
| Series | clk: meson: Fix children of ro_clk may be tampered with | expand |
On Mon 11 Nov 2024 at 17:37, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote: > From: Chuan Liu <chuan.liu@amlogic.com> > > When setting the rate of a clock using clk_regmap_divider_ro_ops, the > rate of its children may be tampered with. > > Fixes: 84af914404db ("clk: meson: a1: add Amlogic A1 Peripherals clock controller driver") > Fixes: 87173557d2f6 ("clk: meson: clk-pll: remove od parameters") > Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") > Fixes: 64aa7008e957 ("clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller") > Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller") > Fixes: e787c9c55eda ("clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver") Think about stable trying to pick up this ... > Signed-off-by: Chuan Liu <chuan.liu@amlogic.com> > --- > Background: During the execution of clk_set_rate(), the function > clk_core_round_rate_nolock() is called to calculate the matching rate > and save it to 'core->new_rate'. At the same time, it recalculates and > updates its 'child->newrate'. Finally, clk_change_rate() is called to > set all 'new_rates'. > > In clk_regmap_divider_ro_ops, there is an implementation of > 'determine_rate'. If a clock (name as 'ro_divider') that references > clk_regmap_divider_ro_ops is not configured with CLK_DIVIDER_READ_ONLY, > it will result in the calculation of an incorrect core->new_rate and > potentially tamper with child->newrate, ultimately leading to the > corruption of the rate for 'ro_divider's' children. A slitghtly more simple way to put it, is that ro_ops have the regular determine_rate function, so it can actually alter the rate. That should be in the commit description, not where it will be dropped. Requiring the flag in addition to ro_ops in redundant. Plus, it is not the platform that should be fixed but the divider driver. Just put the content of the CLK_DIVIDER_READ_ONLY if clause into a function, clk_regmap_div_ro_determine_rate(), and use it - directly for ro_ops - under if clause for regular ops. > --- > drivers/clk/meson/a1-peripherals.c | 2 ++ > drivers/clk/meson/axg.c | 5 +++-- > drivers/clk/meson/g12a.c | 23 ++++++++++++++--------- > drivers/clk/meson/gxbb.c | 18 ++++++++++-------- > drivers/clk/meson/meson8-ddr.c | 2 +- > drivers/clk/meson/meson8b.c | 4 +++- > drivers/clk/meson/s4-peripherals.c | 2 ++ > drivers/clk/meson/s4-pll.c | 2 +- > 8 files changed, 36 insertions(+), 22 deletions(-) > > diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c > index 7aa6abb2eb1f..eedf7c2bf970 100644 > --- a/drivers/clk/meson/a1-peripherals.c > +++ b/drivers/clk/meson/a1-peripherals.c > @@ -266,6 +266,7 @@ static struct clk_regmap sys_b_div = { > .offset = SYS_CLK_CTRL0, > .shift = 16, > .width = 10, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sys_b_div", > @@ -314,6 +315,7 @@ static struct clk_regmap sys_a_div = { > .offset = SYS_CLK_CTRL0, > .shift = 0, > .width = 10, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sys_a_div", > diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c > index 1b08daf579b2..eb86c4d10046 100644 > --- a/drivers/clk/meson/axg.c > +++ b/drivers/clk/meson/axg.c > @@ -71,7 +71,7 @@ static struct clk_regmap axg_fixed_pll = { > .offset = HHI_MPLL_CNTL, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "fixed_pll", > @@ -130,7 +130,7 @@ static struct clk_regmap axg_sys_pll = { > .offset = HHI_SYS_PLL_CNTL, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sys_pll", > @@ -471,6 +471,7 @@ static struct clk_regmap axg_mpll_prediv = { > .offset = HHI_MPLL_CNTL5, > .shift = 12, > .width = 1, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "mpll_prediv", > diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c > index d3539fe9f7af..c7c9fdfd021f 100644 > --- a/drivers/clk/meson/g12a.c > +++ b/drivers/clk/meson/g12a.c > @@ -76,7 +76,7 @@ static struct clk_regmap g12a_fixed_pll = { > .offset = HHI_FIX_PLL_CNTL0, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "fixed_pll", > @@ -443,6 +443,7 @@ static struct clk_regmap g12a_cpu_clk_mux1_div = { > .offset = HHI_SYS_CPU_CLK_CNTL0, > .shift = 20, > .width = 6, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpu_clk_dyn1_div", > @@ -627,6 +628,7 @@ static struct clk_regmap g12b_cpub_clk_mux1_div = { > .offset = HHI_SYS_CPUB_CLK_CNTL, > .shift = 20, > .width = 6, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpub_clk_dyn1_div", > @@ -746,6 +748,7 @@ static struct clk_regmap sm1_dsu_clk_mux0_div = { > .offset = HHI_SYS_CPU_CLK_CNTL5, > .shift = 4, > .width = 6, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "dsu_clk_dyn0_div", > @@ -781,6 +784,7 @@ static struct clk_regmap sm1_dsu_clk_mux1_div = { > .offset = HHI_SYS_CPU_CLK_CNTL5, > .shift = 20, > .width = 6, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "dsu_clk_dyn1_div", > @@ -1198,7 +1202,7 @@ static struct clk_regmap g12a_cpu_clk_apb_div = { > .offset = HHI_SYS_CPU_CLK_CNTL1, > .shift = 3, > .width = 3, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpu_clk_apb_div", > @@ -1232,7 +1236,7 @@ static struct clk_regmap g12a_cpu_clk_atb_div = { > .offset = HHI_SYS_CPU_CLK_CNTL1, > .shift = 6, > .width = 3, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpu_clk_atb_div", > @@ -1266,7 +1270,7 @@ static struct clk_regmap g12a_cpu_clk_axi_div = { > .offset = HHI_SYS_CPU_CLK_CNTL1, > .shift = 9, > .width = 3, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpu_clk_axi_div", > @@ -1300,7 +1304,7 @@ static struct clk_regmap g12a_cpu_clk_trace_div = { > .offset = HHI_SYS_CPU_CLK_CNTL1, > .shift = 20, > .width = 3, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "cpu_clk_trace_div", > @@ -1736,7 +1740,7 @@ static struct clk_regmap sm1_gp1_pll = { > .shift = 16, > .width = 3, > .flags = (CLK_DIVIDER_POWER_OF_TWO | > - CLK_DIVIDER_ROUND_CLOSEST), > + CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_READ_ONLY), > }, > .hw.init = &(struct clk_init_data){ > .name = "gp1_pll", > @@ -1999,7 +2003,7 @@ static struct clk_regmap g12a_hdmi_pll_od = { > .offset = HHI_HDMI_PLL_CNTL0, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od", > @@ -2017,7 +2021,7 @@ static struct clk_regmap g12a_hdmi_pll_od2 = { > .offset = HHI_HDMI_PLL_CNTL0, > .shift = 18, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od2", > @@ -2035,7 +2039,7 @@ static struct clk_regmap g12a_hdmi_pll = { > .offset = HHI_HDMI_PLL_CNTL0, > .shift = 20, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll", > @@ -4048,6 +4052,7 @@ static struct clk_regmap g12a_ts_div = { > .offset = HHI_TS_CLK_CNTL, > .shift = 0, > .width = 8, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "ts_div", > diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c > index 262c318edbd5..e2b419100e0c 100644 > --- a/drivers/clk/meson/gxbb.c > +++ b/drivers/clk/meson/gxbb.c > @@ -131,7 +131,7 @@ static struct clk_regmap gxbb_fixed_pll = { > .offset = HHI_MPLL_CNTL, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "fixed_pll", > @@ -267,7 +267,7 @@ static struct clk_regmap gxbb_hdmi_pll_od = { > .offset = HHI_HDMI_PLL_CNTL2, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od", > @@ -285,7 +285,7 @@ static struct clk_regmap gxbb_hdmi_pll_od2 = { > .offset = HHI_HDMI_PLL_CNTL2, > .shift = 22, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od2", > @@ -303,7 +303,7 @@ static struct clk_regmap gxbb_hdmi_pll = { > .offset = HHI_HDMI_PLL_CNTL2, > .shift = 18, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll", > @@ -321,7 +321,7 @@ static struct clk_regmap gxl_hdmi_pll_od = { > .offset = HHI_HDMI_PLL_CNTL + 8, > .shift = 21, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od", > @@ -339,7 +339,7 @@ static struct clk_regmap gxl_hdmi_pll_od2 = { > .offset = HHI_HDMI_PLL_CNTL + 8, > .shift = 23, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll_od2", > @@ -357,7 +357,7 @@ static struct clk_regmap gxl_hdmi_pll = { > .offset = HHI_HDMI_PLL_CNTL + 8, > .shift = 19, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "hdmi_pll", > @@ -413,7 +413,7 @@ static struct clk_regmap gxbb_sys_pll = { > .offset = HHI_SYS_PLL_CNTL, > .shift = 10, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sys_pll", > @@ -703,6 +703,7 @@ static struct clk_regmap gxbb_mpll_prediv = { > .offset = HHI_MPLL_CNTL5, > .shift = 12, > .width = 1, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "mpll_prediv", > @@ -911,6 +912,7 @@ static struct clk_regmap gxbb_mpeg_clk_div = { > .offset = HHI_MPEG_CLK_CNTL, > .shift = 0, > .width = 7, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "mpeg_clk_div", > diff --git a/drivers/clk/meson/meson8-ddr.c b/drivers/clk/meson/meson8-ddr.c > index 4b73ea244b63..950f323072fb 100644 > --- a/drivers/clk/meson/meson8-ddr.c > +++ b/drivers/clk/meson/meson8-ddr.c > @@ -65,7 +65,7 @@ static struct clk_regmap meson8_ddr_pll = { > .offset = AM_DDR_PLL_CNTL, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "ddr_pll", > diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c > index e4b474c5f86c..4dba11c0ab7e 100644 > --- a/drivers/clk/meson/meson8b.c > +++ b/drivers/clk/meson/meson8b.c > @@ -104,7 +104,7 @@ static struct clk_regmap meson8b_fixed_pll = { > .offset = HHI_MPLL_CNTL, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "fixed_pll", > @@ -457,6 +457,7 @@ static struct clk_regmap meson8b_mpll_prediv = { > .offset = HHI_MPLL_CNTL5, > .shift = 12, > .width = 1, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "mpll_prediv", > @@ -635,6 +636,7 @@ static struct clk_regmap meson8b_mpeg_clk_div = { > .offset = HHI_MPEG_CLK_CNTL, > .shift = 0, > .width = 7, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "mpeg_clk_div", > diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c > index c930cf0614a0..470431355e25 100644 > --- a/drivers/clk/meson/s4-peripherals.c > +++ b/drivers/clk/meson/s4-peripherals.c > @@ -175,6 +175,7 @@ static struct clk_regmap s4_sysclk_b_div = { > .offset = CLKCTRL_SYS_CLK_CTRL0, > .shift = 16, > .width = 10, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sysclk_b_div", > @@ -221,6 +222,7 @@ static struct clk_regmap s4_sysclk_a_div = { > .offset = CLKCTRL_SYS_CLK_CTRL0, > .shift = 0, > .width = 10, > + .flags = CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "sysclk_a_div", > diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c > index d8e621e79428..5dc051afc06a 100644 > --- a/drivers/clk/meson/s4-pll.c > +++ b/drivers/clk/meson/s4-pll.c > @@ -72,7 +72,7 @@ static struct clk_regmap s4_fixed_pll = { > .offset = ANACTRL_FIXPLL_CTRL0, > .shift = 16, > .width = 2, > - .flags = CLK_DIVIDER_POWER_OF_TWO, > + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, > }, > .hw.init = &(struct clk_init_data){ > .name = "fixed_pll", > > --- > base-commit: 664988eb47dd2d6ae1d9e4188ec91832562f8f26 > change-id: 20241111-fix_childclk_of_roclk_has_been_tampered_with-61dbcc623746 > > Best regards,
On 11/12/2024 5:01 PM, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > On Mon 11 Nov 2024 at 17:37, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote: > >> From: Chuan Liu <chuan.liu@amlogic.com> >> >> When setting the rate of a clock using clk_regmap_divider_ro_ops, the >> rate of its children may be tampered with. >> >> Fixes: 84af914404db ("clk: meson: a1: add Amlogic A1 Peripherals clock controller driver") >> Fixes: 87173557d2f6 ("clk: meson: clk-pll: remove od parameters") >> Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") >> Fixes: 64aa7008e957 ("clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller") >> Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller") >> Fixes: e787c9c55eda ("clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver") > Think about stable trying to pick up this ... > >> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com> >> --- >> Background: During the execution of clk_set_rate(), the function >> clk_core_round_rate_nolock() is called to calculate the matching rate >> and save it to 'core->new_rate'. At the same time, it recalculates and >> updates its 'child->newrate'. Finally, clk_change_rate() is called to >> set all 'new_rates'. >> >> In clk_regmap_divider_ro_ops, there is an implementation of >> 'determine_rate'. If a clock (name as 'ro_divider') that references >> clk_regmap_divider_ro_ops is not configured with CLK_DIVIDER_READ_ONLY, >> it will result in the calculation of an incorrect core->new_rate and >> potentially tamper with child->newrate, ultimately leading to the >> corruption of the rate for 'ro_divider's' children. > A slitghtly more simple way to put it, is that ro_ops have the regular > determine_rate function, so it can actually alter the rate. > > That should be in the commit description, not where it will be dropped. > > Requiring the flag in addition to ro_ops in redundant. > Plus, it is not the platform that should be fixed but the divider > driver. > > Just put the content of the CLK_DIVIDER_READ_ONLY if clause into a > function, clk_regmap_div_ro_determine_rate(), and use it > - directly for ro_ops > - under if clause for regular ops. The approach of adding clk_regmap_div_ro_determine_rate() will be inconsistent with the style in clk-divider.c in CCF, and CLK_DIVIDER_READ_ONLY will also become meaningless for our driver. Do we need to maintain the style of clk-divider.c in CCF? > >> --- >> drivers/clk/meson/a1-peripherals.c | 2 ++ >> drivers/clk/meson/axg.c | 5 +++-- >> drivers/clk/meson/g12a.c | 23 ++++++++++++++--------- >> drivers/clk/meson/gxbb.c | 18 ++++++++++-------- >> drivers/clk/meson/meson8-ddr.c | 2 +- >> drivers/clk/meson/meson8b.c | 4 +++- >> drivers/clk/meson/s4-peripherals.c | 2 ++ >> drivers/clk/meson/s4-pll.c | 2 +- >> 8 files changed, 36 insertions(+), 22 deletions(-) >> >> diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c >> index 7aa6abb2eb1f..eedf7c2bf970 100644 >> --- a/drivers/clk/meson/a1-peripherals.c >> +++ b/drivers/clk/meson/a1-peripherals.c >> @@ -266,6 +266,7 @@ static struct clk_regmap sys_b_div = { >> .offset = SYS_CLK_CTRL0, >> .shift = 16, >> .width = 10, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sys_b_div", >> @@ -314,6 +315,7 @@ static struct clk_regmap sys_a_div = { >> .offset = SYS_CLK_CTRL0, >> .shift = 0, >> .width = 10, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sys_a_div", >> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c >> index 1b08daf579b2..eb86c4d10046 100644 >> --- a/drivers/clk/meson/axg.c >> +++ b/drivers/clk/meson/axg.c >> @@ -71,7 +71,7 @@ static struct clk_regmap axg_fixed_pll = { >> .offset = HHI_MPLL_CNTL, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "fixed_pll", >> @@ -130,7 +130,7 @@ static struct clk_regmap axg_sys_pll = { >> .offset = HHI_SYS_PLL_CNTL, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sys_pll", >> @@ -471,6 +471,7 @@ static struct clk_regmap axg_mpll_prediv = { >> .offset = HHI_MPLL_CNTL5, >> .shift = 12, >> .width = 1, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "mpll_prediv", >> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c >> index d3539fe9f7af..c7c9fdfd021f 100644 >> --- a/drivers/clk/meson/g12a.c >> +++ b/drivers/clk/meson/g12a.c >> @@ -76,7 +76,7 @@ static struct clk_regmap g12a_fixed_pll = { >> .offset = HHI_FIX_PLL_CNTL0, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "fixed_pll", >> @@ -443,6 +443,7 @@ static struct clk_regmap g12a_cpu_clk_mux1_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL0, >> .shift = 20, >> .width = 6, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpu_clk_dyn1_div", >> @@ -627,6 +628,7 @@ static struct clk_regmap g12b_cpub_clk_mux1_div = { >> .offset = HHI_SYS_CPUB_CLK_CNTL, >> .shift = 20, >> .width = 6, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpub_clk_dyn1_div", >> @@ -746,6 +748,7 @@ static struct clk_regmap sm1_dsu_clk_mux0_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL5, >> .shift = 4, >> .width = 6, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "dsu_clk_dyn0_div", >> @@ -781,6 +784,7 @@ static struct clk_regmap sm1_dsu_clk_mux1_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL5, >> .shift = 20, >> .width = 6, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "dsu_clk_dyn1_div", >> @@ -1198,7 +1202,7 @@ static struct clk_regmap g12a_cpu_clk_apb_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL1, >> .shift = 3, >> .width = 3, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpu_clk_apb_div", >> @@ -1232,7 +1236,7 @@ static struct clk_regmap g12a_cpu_clk_atb_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL1, >> .shift = 6, >> .width = 3, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpu_clk_atb_div", >> @@ -1266,7 +1270,7 @@ static struct clk_regmap g12a_cpu_clk_axi_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL1, >> .shift = 9, >> .width = 3, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpu_clk_axi_div", >> @@ -1300,7 +1304,7 @@ static struct clk_regmap g12a_cpu_clk_trace_div = { >> .offset = HHI_SYS_CPU_CLK_CNTL1, >> .shift = 20, >> .width = 3, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "cpu_clk_trace_div", >> @@ -1736,7 +1740,7 @@ static struct clk_regmap sm1_gp1_pll = { >> .shift = 16, >> .width = 3, >> .flags = (CLK_DIVIDER_POWER_OF_TWO | >> - CLK_DIVIDER_ROUND_CLOSEST), >> + CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_READ_ONLY), >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "gp1_pll", >> @@ -1999,7 +2003,7 @@ static struct clk_regmap g12a_hdmi_pll_od = { >> .offset = HHI_HDMI_PLL_CNTL0, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od", >> @@ -2017,7 +2021,7 @@ static struct clk_regmap g12a_hdmi_pll_od2 = { >> .offset = HHI_HDMI_PLL_CNTL0, >> .shift = 18, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od2", >> @@ -2035,7 +2039,7 @@ static struct clk_regmap g12a_hdmi_pll = { >> .offset = HHI_HDMI_PLL_CNTL0, >> .shift = 20, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll", >> @@ -4048,6 +4052,7 @@ static struct clk_regmap g12a_ts_div = { >> .offset = HHI_TS_CLK_CNTL, >> .shift = 0, >> .width = 8, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "ts_div", >> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c >> index 262c318edbd5..e2b419100e0c 100644 >> --- a/drivers/clk/meson/gxbb.c >> +++ b/drivers/clk/meson/gxbb.c >> @@ -131,7 +131,7 @@ static struct clk_regmap gxbb_fixed_pll = { >> .offset = HHI_MPLL_CNTL, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "fixed_pll", >> @@ -267,7 +267,7 @@ static struct clk_regmap gxbb_hdmi_pll_od = { >> .offset = HHI_HDMI_PLL_CNTL2, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od", >> @@ -285,7 +285,7 @@ static struct clk_regmap gxbb_hdmi_pll_od2 = { >> .offset = HHI_HDMI_PLL_CNTL2, >> .shift = 22, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od2", >> @@ -303,7 +303,7 @@ static struct clk_regmap gxbb_hdmi_pll = { >> .offset = HHI_HDMI_PLL_CNTL2, >> .shift = 18, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll", >> @@ -321,7 +321,7 @@ static struct clk_regmap gxl_hdmi_pll_od = { >> .offset = HHI_HDMI_PLL_CNTL + 8, >> .shift = 21, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od", >> @@ -339,7 +339,7 @@ static struct clk_regmap gxl_hdmi_pll_od2 = { >> .offset = HHI_HDMI_PLL_CNTL + 8, >> .shift = 23, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll_od2", >> @@ -357,7 +357,7 @@ static struct clk_regmap gxl_hdmi_pll = { >> .offset = HHI_HDMI_PLL_CNTL + 8, >> .shift = 19, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "hdmi_pll", >> @@ -413,7 +413,7 @@ static struct clk_regmap gxbb_sys_pll = { >> .offset = HHI_SYS_PLL_CNTL, >> .shift = 10, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sys_pll", >> @@ -703,6 +703,7 @@ static struct clk_regmap gxbb_mpll_prediv = { >> .offset = HHI_MPLL_CNTL5, >> .shift = 12, >> .width = 1, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "mpll_prediv", >> @@ -911,6 +912,7 @@ static struct clk_regmap gxbb_mpeg_clk_div = { >> .offset = HHI_MPEG_CLK_CNTL, >> .shift = 0, >> .width = 7, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "mpeg_clk_div", >> diff --git a/drivers/clk/meson/meson8-ddr.c b/drivers/clk/meson/meson8-ddr.c >> index 4b73ea244b63..950f323072fb 100644 >> --- a/drivers/clk/meson/meson8-ddr.c >> +++ b/drivers/clk/meson/meson8-ddr.c >> @@ -65,7 +65,7 @@ static struct clk_regmap meson8_ddr_pll = { >> .offset = AM_DDR_PLL_CNTL, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "ddr_pll", >> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c >> index e4b474c5f86c..4dba11c0ab7e 100644 >> --- a/drivers/clk/meson/meson8b.c >> +++ b/drivers/clk/meson/meson8b.c >> @@ -104,7 +104,7 @@ static struct clk_regmap meson8b_fixed_pll = { >> .offset = HHI_MPLL_CNTL, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "fixed_pll", >> @@ -457,6 +457,7 @@ static struct clk_regmap meson8b_mpll_prediv = { >> .offset = HHI_MPLL_CNTL5, >> .shift = 12, >> .width = 1, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "mpll_prediv", >> @@ -635,6 +636,7 @@ static struct clk_regmap meson8b_mpeg_clk_div = { >> .offset = HHI_MPEG_CLK_CNTL, >> .shift = 0, >> .width = 7, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "mpeg_clk_div", >> diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c >> index c930cf0614a0..470431355e25 100644 >> --- a/drivers/clk/meson/s4-peripherals.c >> +++ b/drivers/clk/meson/s4-peripherals.c >> @@ -175,6 +175,7 @@ static struct clk_regmap s4_sysclk_b_div = { >> .offset = CLKCTRL_SYS_CLK_CTRL0, >> .shift = 16, >> .width = 10, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sysclk_b_div", >> @@ -221,6 +222,7 @@ static struct clk_regmap s4_sysclk_a_div = { >> .offset = CLKCTRL_SYS_CLK_CTRL0, >> .shift = 0, >> .width = 10, >> + .flags = CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "sysclk_a_div", >> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c >> index d8e621e79428..5dc051afc06a 100644 >> --- a/drivers/clk/meson/s4-pll.c >> +++ b/drivers/clk/meson/s4-pll.c >> @@ -72,7 +72,7 @@ static struct clk_regmap s4_fixed_pll = { >> .offset = ANACTRL_FIXPLL_CTRL0, >> .shift = 16, >> .width = 2, >> - .flags = CLK_DIVIDER_POWER_OF_TWO, >> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >> }, >> .hw.init = &(struct clk_init_data){ >> .name = "fixed_pll", >> >> --- >> base-commit: 664988eb47dd2d6ae1d9e4188ec91832562f8f26 >> change-id: 20241111-fix_childclk_of_roclk_has_been_tampered_with-61dbcc623746 >> >> Best regards, > -- > Jerome
On Tue 12 Nov 2024 at 18:16, Chuan Liu <chuan.liu@amlogic.com> wrote: > On 11/12/2024 5:01 PM, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> >> On Mon 11 Nov 2024 at 17:37, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote: >> >>> From: Chuan Liu <chuan.liu@amlogic.com> >>> >>> When setting the rate of a clock using clk_regmap_divider_ro_ops, the >>> rate of its children may be tampered with. >>> >>> Fixes: 84af914404db ("clk: meson: a1: add Amlogic A1 Peripherals clock controller driver") >>> Fixes: 87173557d2f6 ("clk: meson: clk-pll: remove od parameters") >>> Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") >>> Fixes: 64aa7008e957 ("clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller") >>> Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller") >>> Fixes: e787c9c55eda ("clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver") >> Think about stable trying to pick up this ... >> >>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com> >>> --- >>> Background: During the execution of clk_set_rate(), the function >>> clk_core_round_rate_nolock() is called to calculate the matching rate >>> and save it to 'core->new_rate'. At the same time, it recalculates and >>> updates its 'child->newrate'. Finally, clk_change_rate() is called to >>> set all 'new_rates'. >>> >>> In clk_regmap_divider_ro_ops, there is an implementation of >>> 'determine_rate'. If a clock (name as 'ro_divider') that references >>> clk_regmap_divider_ro_ops is not configured with CLK_DIVIDER_READ_ONLY, >>> it will result in the calculation of an incorrect core->new_rate and >>> potentially tamper with child->newrate, ultimately leading to the >>> corruption of the rate for 'ro_divider's' children. >> A slitghtly more simple way to put it, is that ro_ops have the regular >> determine_rate function, so it can actually alter the rate. >> >> That should be in the commit description, not where it will be dropped. >> >> Requiring the flag in addition to ro_ops in redundant. >> Plus, it is not the platform that should be fixed but the divider >> driver. >> >> Just put the content of the CLK_DIVIDER_READ_ONLY if clause into a >> function, clk_regmap_div_ro_determine_rate(), and use it >> - directly for ro_ops >> - under if clause for regular ops. > > The approach of adding clk_regmap_div_ro_determine_rate() will be > inconsistent with the style in clk-divider.c in CCF, and > CLK_DIVIDER_READ_ONLY will also become meaningless for our driver. > Do we need to maintain the style of clk-divider.c in CCF? There is no point in having ro_ops that are not actually RO. Please fix the ops. > >> >>> --- >>> drivers/clk/meson/a1-peripherals.c | 2 ++ >>> drivers/clk/meson/axg.c | 5 +++-- >>> drivers/clk/meson/g12a.c | 23 ++++++++++++++--------- >>> drivers/clk/meson/gxbb.c | 18 ++++++++++-------- >>> drivers/clk/meson/meson8-ddr.c | 2 +- >>> drivers/clk/meson/meson8b.c | 4 +++- >>> drivers/clk/meson/s4-peripherals.c | 2 ++ >>> drivers/clk/meson/s4-pll.c | 2 +- >>> 8 files changed, 36 insertions(+), 22 deletions(-) >>> >>> diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c >>> index 7aa6abb2eb1f..eedf7c2bf970 100644 >>> --- a/drivers/clk/meson/a1-peripherals.c >>> +++ b/drivers/clk/meson/a1-peripherals.c >>> @@ -266,6 +266,7 @@ static struct clk_regmap sys_b_div = { >>> .offset = SYS_CLK_CTRL0, >>> .shift = 16, >>> .width = 10, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sys_b_div", >>> @@ -314,6 +315,7 @@ static struct clk_regmap sys_a_div = { >>> .offset = SYS_CLK_CTRL0, >>> .shift = 0, >>> .width = 10, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sys_a_div", >>> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c >>> index 1b08daf579b2..eb86c4d10046 100644 >>> --- a/drivers/clk/meson/axg.c >>> +++ b/drivers/clk/meson/axg.c >>> @@ -71,7 +71,7 @@ static struct clk_regmap axg_fixed_pll = { >>> .offset = HHI_MPLL_CNTL, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "fixed_pll", >>> @@ -130,7 +130,7 @@ static struct clk_regmap axg_sys_pll = { >>> .offset = HHI_SYS_PLL_CNTL, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sys_pll", >>> @@ -471,6 +471,7 @@ static struct clk_regmap axg_mpll_prediv = { >>> .offset = HHI_MPLL_CNTL5, >>> .shift = 12, >>> .width = 1, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "mpll_prediv", >>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c >>> index d3539fe9f7af..c7c9fdfd021f 100644 >>> --- a/drivers/clk/meson/g12a.c >>> +++ b/drivers/clk/meson/g12a.c >>> @@ -76,7 +76,7 @@ static struct clk_regmap g12a_fixed_pll = { >>> .offset = HHI_FIX_PLL_CNTL0, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "fixed_pll", >>> @@ -443,6 +443,7 @@ static struct clk_regmap g12a_cpu_clk_mux1_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL0, >>> .shift = 20, >>> .width = 6, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpu_clk_dyn1_div", >>> @@ -627,6 +628,7 @@ static struct clk_regmap g12b_cpub_clk_mux1_div = { >>> .offset = HHI_SYS_CPUB_CLK_CNTL, >>> .shift = 20, >>> .width = 6, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpub_clk_dyn1_div", >>> @@ -746,6 +748,7 @@ static struct clk_regmap sm1_dsu_clk_mux0_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL5, >>> .shift = 4, >>> .width = 6, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "dsu_clk_dyn0_div", >>> @@ -781,6 +784,7 @@ static struct clk_regmap sm1_dsu_clk_mux1_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL5, >>> .shift = 20, >>> .width = 6, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "dsu_clk_dyn1_div", >>> @@ -1198,7 +1202,7 @@ static struct clk_regmap g12a_cpu_clk_apb_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL1, >>> .shift = 3, >>> .width = 3, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpu_clk_apb_div", >>> @@ -1232,7 +1236,7 @@ static struct clk_regmap g12a_cpu_clk_atb_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL1, >>> .shift = 6, >>> .width = 3, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpu_clk_atb_div", >>> @@ -1266,7 +1270,7 @@ static struct clk_regmap g12a_cpu_clk_axi_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL1, >>> .shift = 9, >>> .width = 3, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpu_clk_axi_div", >>> @@ -1300,7 +1304,7 @@ static struct clk_regmap g12a_cpu_clk_trace_div = { >>> .offset = HHI_SYS_CPU_CLK_CNTL1, >>> .shift = 20, >>> .width = 3, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "cpu_clk_trace_div", >>> @@ -1736,7 +1740,7 @@ static struct clk_regmap sm1_gp1_pll = { >>> .shift = 16, >>> .width = 3, >>> .flags = (CLK_DIVIDER_POWER_OF_TWO | >>> - CLK_DIVIDER_ROUND_CLOSEST), >>> + CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_READ_ONLY), >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "gp1_pll", >>> @@ -1999,7 +2003,7 @@ static struct clk_regmap g12a_hdmi_pll_od = { >>> .offset = HHI_HDMI_PLL_CNTL0, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od", >>> @@ -2017,7 +2021,7 @@ static struct clk_regmap g12a_hdmi_pll_od2 = { >>> .offset = HHI_HDMI_PLL_CNTL0, >>> .shift = 18, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od2", >>> @@ -2035,7 +2039,7 @@ static struct clk_regmap g12a_hdmi_pll = { >>> .offset = HHI_HDMI_PLL_CNTL0, >>> .shift = 20, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll", >>> @@ -4048,6 +4052,7 @@ static struct clk_regmap g12a_ts_div = { >>> .offset = HHI_TS_CLK_CNTL, >>> .shift = 0, >>> .width = 8, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "ts_div", >>> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c >>> index 262c318edbd5..e2b419100e0c 100644 >>> --- a/drivers/clk/meson/gxbb.c >>> +++ b/drivers/clk/meson/gxbb.c >>> @@ -131,7 +131,7 @@ static struct clk_regmap gxbb_fixed_pll = { >>> .offset = HHI_MPLL_CNTL, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "fixed_pll", >>> @@ -267,7 +267,7 @@ static struct clk_regmap gxbb_hdmi_pll_od = { >>> .offset = HHI_HDMI_PLL_CNTL2, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od", >>> @@ -285,7 +285,7 @@ static struct clk_regmap gxbb_hdmi_pll_od2 = { >>> .offset = HHI_HDMI_PLL_CNTL2, >>> .shift = 22, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od2", >>> @@ -303,7 +303,7 @@ static struct clk_regmap gxbb_hdmi_pll = { >>> .offset = HHI_HDMI_PLL_CNTL2, >>> .shift = 18, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll", >>> @@ -321,7 +321,7 @@ static struct clk_regmap gxl_hdmi_pll_od = { >>> .offset = HHI_HDMI_PLL_CNTL + 8, >>> .shift = 21, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od", >>> @@ -339,7 +339,7 @@ static struct clk_regmap gxl_hdmi_pll_od2 = { >>> .offset = HHI_HDMI_PLL_CNTL + 8, >>> .shift = 23, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll_od2", >>> @@ -357,7 +357,7 @@ static struct clk_regmap gxl_hdmi_pll = { >>> .offset = HHI_HDMI_PLL_CNTL + 8, >>> .shift = 19, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "hdmi_pll", >>> @@ -413,7 +413,7 @@ static struct clk_regmap gxbb_sys_pll = { >>> .offset = HHI_SYS_PLL_CNTL, >>> .shift = 10, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sys_pll", >>> @@ -703,6 +703,7 @@ static struct clk_regmap gxbb_mpll_prediv = { >>> .offset = HHI_MPLL_CNTL5, >>> .shift = 12, >>> .width = 1, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "mpll_prediv", >>> @@ -911,6 +912,7 @@ static struct clk_regmap gxbb_mpeg_clk_div = { >>> .offset = HHI_MPEG_CLK_CNTL, >>> .shift = 0, >>> .width = 7, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "mpeg_clk_div", >>> diff --git a/drivers/clk/meson/meson8-ddr.c b/drivers/clk/meson/meson8-ddr.c >>> index 4b73ea244b63..950f323072fb 100644 >>> --- a/drivers/clk/meson/meson8-ddr.c >>> +++ b/drivers/clk/meson/meson8-ddr.c >>> @@ -65,7 +65,7 @@ static struct clk_regmap meson8_ddr_pll = { >>> .offset = AM_DDR_PLL_CNTL, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "ddr_pll", >>> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c >>> index e4b474c5f86c..4dba11c0ab7e 100644 >>> --- a/drivers/clk/meson/meson8b.c >>> +++ b/drivers/clk/meson/meson8b.c >>> @@ -104,7 +104,7 @@ static struct clk_regmap meson8b_fixed_pll = { >>> .offset = HHI_MPLL_CNTL, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "fixed_pll", >>> @@ -457,6 +457,7 @@ static struct clk_regmap meson8b_mpll_prediv = { >>> .offset = HHI_MPLL_CNTL5, >>> .shift = 12, >>> .width = 1, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "mpll_prediv", >>> @@ -635,6 +636,7 @@ static struct clk_regmap meson8b_mpeg_clk_div = { >>> .offset = HHI_MPEG_CLK_CNTL, >>> .shift = 0, >>> .width = 7, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "mpeg_clk_div", >>> diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c >>> index c930cf0614a0..470431355e25 100644 >>> --- a/drivers/clk/meson/s4-peripherals.c >>> +++ b/drivers/clk/meson/s4-peripherals.c >>> @@ -175,6 +175,7 @@ static struct clk_regmap s4_sysclk_b_div = { >>> .offset = CLKCTRL_SYS_CLK_CTRL0, >>> .shift = 16, >>> .width = 10, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sysclk_b_div", >>> @@ -221,6 +222,7 @@ static struct clk_regmap s4_sysclk_a_div = { >>> .offset = CLKCTRL_SYS_CLK_CTRL0, >>> .shift = 0, >>> .width = 10, >>> + .flags = CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "sysclk_a_div", >>> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c >>> index d8e621e79428..5dc051afc06a 100644 >>> --- a/drivers/clk/meson/s4-pll.c >>> +++ b/drivers/clk/meson/s4-pll.c >>> @@ -72,7 +72,7 @@ static struct clk_regmap s4_fixed_pll = { >>> .offset = ANACTRL_FIXPLL_CTRL0, >>> .shift = 16, >>> .width = 2, >>> - .flags = CLK_DIVIDER_POWER_OF_TWO, >>> + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, >>> }, >>> .hw.init = &(struct clk_init_data){ >>> .name = "fixed_pll", >>> >>> --- >>> base-commit: 664988eb47dd2d6ae1d9e4188ec91832562f8f26 >>> change-id: 20241111-fix_childclk_of_roclk_has_been_tampered_with-61dbcc623746 >>> >>> Best regards, >> -- >> Jerome
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c index 7aa6abb2eb1f..eedf7c2bf970 100644 --- a/drivers/clk/meson/a1-peripherals.c +++ b/drivers/clk/meson/a1-peripherals.c @@ -266,6 +266,7 @@ static struct clk_regmap sys_b_div = { .offset = SYS_CLK_CTRL0, .shift = 16, .width = 10, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sys_b_div", @@ -314,6 +315,7 @@ static struct clk_regmap sys_a_div = { .offset = SYS_CLK_CTRL0, .shift = 0, .width = 10, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sys_a_div", diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index 1b08daf579b2..eb86c4d10046 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -71,7 +71,7 @@ static struct clk_regmap axg_fixed_pll = { .offset = HHI_MPLL_CNTL, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", @@ -130,7 +130,7 @@ static struct clk_regmap axg_sys_pll = { .offset = HHI_SYS_PLL_CNTL, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sys_pll", @@ -471,6 +471,7 @@ static struct clk_regmap axg_mpll_prediv = { .offset = HHI_MPLL_CNTL5, .shift = 12, .width = 1, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "mpll_prediv", diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index d3539fe9f7af..c7c9fdfd021f 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -76,7 +76,7 @@ static struct clk_regmap g12a_fixed_pll = { .offset = HHI_FIX_PLL_CNTL0, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", @@ -443,6 +443,7 @@ static struct clk_regmap g12a_cpu_clk_mux1_div = { .offset = HHI_SYS_CPU_CLK_CNTL0, .shift = 20, .width = 6, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn1_div", @@ -627,6 +628,7 @@ static struct clk_regmap g12b_cpub_clk_mux1_div = { .offset = HHI_SYS_CPUB_CLK_CNTL, .shift = 20, .width = 6, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn1_div", @@ -746,6 +748,7 @@ static struct clk_regmap sm1_dsu_clk_mux0_div = { .offset = HHI_SYS_CPU_CLK_CNTL5, .shift = 4, .width = 6, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "dsu_clk_dyn0_div", @@ -781,6 +784,7 @@ static struct clk_regmap sm1_dsu_clk_mux1_div = { .offset = HHI_SYS_CPU_CLK_CNTL5, .shift = 20, .width = 6, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "dsu_clk_dyn1_div", @@ -1198,7 +1202,7 @@ static struct clk_regmap g12a_cpu_clk_apb_div = { .offset = HHI_SYS_CPU_CLK_CNTL1, .shift = 3, .width = 3, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_apb_div", @@ -1232,7 +1236,7 @@ static struct clk_regmap g12a_cpu_clk_atb_div = { .offset = HHI_SYS_CPU_CLK_CNTL1, .shift = 6, .width = 3, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_atb_div", @@ -1266,7 +1270,7 @@ static struct clk_regmap g12a_cpu_clk_axi_div = { .offset = HHI_SYS_CPU_CLK_CNTL1, .shift = 9, .width = 3, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_axi_div", @@ -1300,7 +1304,7 @@ static struct clk_regmap g12a_cpu_clk_trace_div = { .offset = HHI_SYS_CPU_CLK_CNTL1, .shift = 20, .width = 3, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_trace_div", @@ -1736,7 +1740,7 @@ static struct clk_regmap sm1_gp1_pll = { .shift = 16, .width = 3, .flags = (CLK_DIVIDER_POWER_OF_TWO | - CLK_DIVIDER_ROUND_CLOSEST), + CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_READ_ONLY), }, .hw.init = &(struct clk_init_data){ .name = "gp1_pll", @@ -1999,7 +2003,7 @@ static struct clk_regmap g12a_hdmi_pll_od = { .offset = HHI_HDMI_PLL_CNTL0, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od", @@ -2017,7 +2021,7 @@ static struct clk_regmap g12a_hdmi_pll_od2 = { .offset = HHI_HDMI_PLL_CNTL0, .shift = 18, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od2", @@ -2035,7 +2039,7 @@ static struct clk_regmap g12a_hdmi_pll = { .offset = HHI_HDMI_PLL_CNTL0, .shift = 20, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll", @@ -4048,6 +4052,7 @@ static struct clk_regmap g12a_ts_div = { .offset = HHI_TS_CLK_CNTL, .shift = 0, .width = 8, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "ts_div", diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 262c318edbd5..e2b419100e0c 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -131,7 +131,7 @@ static struct clk_regmap gxbb_fixed_pll = { .offset = HHI_MPLL_CNTL, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", @@ -267,7 +267,7 @@ static struct clk_regmap gxbb_hdmi_pll_od = { .offset = HHI_HDMI_PLL_CNTL2, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od", @@ -285,7 +285,7 @@ static struct clk_regmap gxbb_hdmi_pll_od2 = { .offset = HHI_HDMI_PLL_CNTL2, .shift = 22, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od2", @@ -303,7 +303,7 @@ static struct clk_regmap gxbb_hdmi_pll = { .offset = HHI_HDMI_PLL_CNTL2, .shift = 18, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll", @@ -321,7 +321,7 @@ static struct clk_regmap gxl_hdmi_pll_od = { .offset = HHI_HDMI_PLL_CNTL + 8, .shift = 21, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od", @@ -339,7 +339,7 @@ static struct clk_regmap gxl_hdmi_pll_od2 = { .offset = HHI_HDMI_PLL_CNTL + 8, .shift = 23, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll_od2", @@ -357,7 +357,7 @@ static struct clk_regmap gxl_hdmi_pll = { .offset = HHI_HDMI_PLL_CNTL + 8, .shift = 19, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll", @@ -413,7 +413,7 @@ static struct clk_regmap gxbb_sys_pll = { .offset = HHI_SYS_PLL_CNTL, .shift = 10, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sys_pll", @@ -703,6 +703,7 @@ static struct clk_regmap gxbb_mpll_prediv = { .offset = HHI_MPLL_CNTL5, .shift = 12, .width = 1, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "mpll_prediv", @@ -911,6 +912,7 @@ static struct clk_regmap gxbb_mpeg_clk_div = { .offset = HHI_MPEG_CLK_CNTL, .shift = 0, .width = 7, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "mpeg_clk_div", diff --git a/drivers/clk/meson/meson8-ddr.c b/drivers/clk/meson/meson8-ddr.c index 4b73ea244b63..950f323072fb 100644 --- a/drivers/clk/meson/meson8-ddr.c +++ b/drivers/clk/meson/meson8-ddr.c @@ -65,7 +65,7 @@ static struct clk_regmap meson8_ddr_pll = { .offset = AM_DDR_PLL_CNTL, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "ddr_pll", diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index e4b474c5f86c..4dba11c0ab7e 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -104,7 +104,7 @@ static struct clk_regmap meson8b_fixed_pll = { .offset = HHI_MPLL_CNTL, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", @@ -457,6 +457,7 @@ static struct clk_regmap meson8b_mpll_prediv = { .offset = HHI_MPLL_CNTL5, .shift = 12, .width = 1, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "mpll_prediv", @@ -635,6 +636,7 @@ static struct clk_regmap meson8b_mpeg_clk_div = { .offset = HHI_MPEG_CLK_CNTL, .shift = 0, .width = 7, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "mpeg_clk_div", diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c index c930cf0614a0..470431355e25 100644 --- a/drivers/clk/meson/s4-peripherals.c +++ b/drivers/clk/meson/s4-peripherals.c @@ -175,6 +175,7 @@ static struct clk_regmap s4_sysclk_b_div = { .offset = CLKCTRL_SYS_CLK_CTRL0, .shift = 16, .width = 10, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sysclk_b_div", @@ -221,6 +222,7 @@ static struct clk_regmap s4_sysclk_a_div = { .offset = CLKCTRL_SYS_CLK_CTRL0, .shift = 0, .width = 10, + .flags = CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "sysclk_a_div", diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c index d8e621e79428..5dc051afc06a 100644 --- a/drivers/clk/meson/s4-pll.c +++ b/drivers/clk/meson/s4-pll.c @@ -72,7 +72,7 @@ static struct clk_regmap s4_fixed_pll = { .offset = ANACTRL_FIXPLL_CTRL0, .shift = 16, .width = 2, - .flags = CLK_DIVIDER_POWER_OF_TWO, + .flags = CLK_DIVIDER_POWER_OF_TWO | CLK_DIVIDER_READ_ONLY, }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll",