@@ -59,7 +59,6 @@
#define RK3588_OTPC_AUTO_EN 0x08
#define RK3588_OTPC_INT_ST 0x84
#define RK3588_OTPC_DOUT0 0x20
-#define RK3588_NO_SECURE_OFFSET 0x300
#define RK3588_NBYTES 4
#define RK3588_BURST_NUM 1
#define RK3588_BURST_SHIFT 8
@@ -69,6 +68,7 @@
struct rockchip_data {
int size;
+ int read_offset;
const char * const *clks;
int num_clks;
nvmem_reg_read_t reg_read;
@@ -196,7 +196,7 @@ static int rk3588_otp_read(void *context, unsigned int offset,
addr_start = round_down(offset, RK3588_NBYTES) / RK3588_NBYTES;
addr_end = round_up(offset + bytes, RK3588_NBYTES) / RK3588_NBYTES;
addr_len = addr_end - addr_start;
- addr_start += RK3588_NO_SECURE_OFFSET;
+ addr_start += otp->data->read_offset / RK3588_NBYTES;
buf = kzalloc(array_size(addr_len, RK3588_NBYTES), GFP_KERNEL);
if (!buf)
@@ -280,6 +280,7 @@ static const char * const rk3588_otp_clocks[] = {
static const struct rockchip_data rk3588_data = {
.size = 0x400,
+ .read_offset = 0xc00,
.clks = rk3588_otp_clocks,
.num_clks = ARRAY_SIZE(rk3588_otp_clocks),
.reg_read = rk3588_otp_read,
The RK3588 has an offset into the OTP area where the readable area begins and automatically adds this to the start address. Other variants are very much similar to rk3588, just with a different offset, so move that value into variant-data. To match the size in bytes, store this value also in bytes and not in number of blocks. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/nvmem/rockchip-otp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)